wiper blades CHEVROLET COLORADO 2007 1.G Owners Manual

6(Low Speed):For steady wiping at low
speed, turn the band away from you to the
rst solid position past the delay settings.
1(High Speed):For high-speed wiping,
turn the band to the second solid position past
the delay settings.
9(Off):To stop the wipers, move the band to off.
Be sure to clear ice and snow from the wiper
blades before using them. If they’re frozen to
the windshield, carefully loosen or thaw them.
If your blades do become worn or damaged,
get new blades or blade inserts.
Windshield Washer
{CAUTION:
In freezing weather, do not use your
washer until the windshield is warmed.
Otherwise the washer uid can form ice
on the windshield, blocking your vision.
QL(Washer Fluid):There is a paddle marked
with the windshield washer symbol at the top
of the multifunction lever. To spray washer uid on
the windshield, push the paddle. The wipers will
clear the window and then either stop or return to
your preset speed.
Cruise Control
The cruise control
set button is located
at the end of the
multifunction lever.
9(Off):Move the lever to this position to turn
the system off.
R(On):Move the lever to this position to turn the
system on.
166

Driving in Rain and on Wet Roads
Rain and wet roads can mean driving trouble.
On a wet road, you cannot stop, accelerate,
or turn as well because your tire-to-road
traction is not as good as on dry roads.And, if your tires do not have much tread left,
you will get even less traction. It is always wise to
go slower and be cautious if rain starts to fall
while you are driving. The surface may get wet
suddenly when your reexes are tuned for driving
on dry pavement.
The heavier the rain, the harder it is to see.
Even if your windshield wiper blades are in good
shape, a heavy rain can make it harder to see
road signs and traffic signals, pavement markings,
the edge of the road, and even people walking.
It is wise to keep your wiping equipment in
good shape and keep your windshield washer
uid reservoir lled with washer uid. Replace your
windshield wiper inserts when they show signs
of streaking or missing areas on the windshield,
or when strips of rubber start to separate from
the inserts.
278

Once you are moving on the freeway, make
certain you allow a reasonable following distance.
Expect to move slightly slower at night.
When you want to leave the freeway, move to
the proper lane well in advance. If you miss your
exit, do not, under any circumstances, stop
and back up. Drive on to the next exit.
The exit ramp can be curved, sometimes quite
sharply. The exit speed is usually posted.
Reduce your speed according to your
speedometer, not to your sense of motion.
After driving for any distance at higher speeds,
you may tend to think you are going slower
than you actually are.
Before Leaving on a Long Trip
Make sure you are ready. Try to be well rested.
If you must start when you are not fresh — such
as after a day’s work — do not plan to make
too many miles that rst part of the journey.
Wear comfortable clothing and shoes you can
easily drive in.Is your vehicle ready for a long trip? If you keep it
serviced and maintained, it is ready to go. If it needs
service, have it done before starting out. Of course,
you will nd experienced and able service experts
in GM dealrships all across North America. They
will be ready and willing to help if you need it.
Here are some things you can check before a trip:
Windshield Washer Fluid:Is the reservoir
full? Are all windows clean inside and outside?
Wiper Blades:Are they in good shape?
Fuel, Engine Oil, Other Fluids:Have you
checked all levels?
Lamps:Are they all working? Are the
lenses clean?
Tires:They are vitally important to a safe,
trouble-free trip. Is the tread good enough
for long-distance driving? Are the tires
all inated to the recommended pressure?
Weather Forecasts:What is the weather
outlook along your route? Should you delay
your trip a short time to avoid a major storm
system?
Maps:Do you have up-to-date maps?
283

Appearance Care........................................ 422
Cleaning the Inside of Your Vehicle.......... 422
Fabric/Carpet............................................. 423
Leather...................................................... 424
Instrument Panel, Vinyl, and Other
Plastic Surfaces..................................... 425
Care of Safety Belts.................................. 425
Weatherstrips............................................ 425
Washing Your Vehicle............................... 426
Cleaning Exterior Lamps/Lenses................ 426
Finish Care............................................... 426
Windshield and Wiper Blades.................... 427
Aluminum or Chrome-Plated
Wheels and Trim................................... 428
Tires......................................................... 429Sheet Metal Damage................................. 429
Finish Damage.......................................... 429
Underbody Maintenance............................ 430
Chemical Paint Spotting............................ 430
Vehicle Care/Appearance Materials............ 431
Vehicle Identication.................................. 432
Vehicle Identication Number (VIN)........... 432
Service Parts Identication Label............... 432
Electrical System........................................ 432
Add-On Electrical Equipment..................... 432
Windshield Wiper Fuses............................ 433
Fuses and Circuit Breakers....................... 433
Engine Compartment Fuse Block............... 433
Capacities and Specications.................... 437
Section 5 Service and Appearance Care
323

Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for
wear and cracking. SeeScheduled Maintenance
on page 442for more information.
Replacement blades come in different types and
are removed in different ways. For proper type and
length, seeNormal Maintenance Replacement
Parts on page 454.
Allowing the wiper blade arm to touch the
windshield when no wiper blade is installed
could damage the windshield. Any damage that
occurs would not be covered by your warranty.
Do not allow the wiper blade arm to touch
the windshield.
1. To remove the old wiper blades, lift the
wiper arm until it locks into a vertical
position.A. Blade Assembly
B. Arm Assembly
C. Locking TabD. Blade Pivot
E. Hook Slot
F. Arm Hook
2. Press down on the blade assembly pivot
locking tab. Pull down on the blade assembly
to release it from the wiper arm hook.
3. Remove the insert from the blade assembly.
The insert has two notches at one end that
are locked by bottom claws of the blade
assembly. At the notched end, pull the
insert from the blade assembly.
375

Notice:Machine compounding or aggressive
polishing on a basecoat/clearcoat paint
nish may damage it. Use only non-abrasive
waxes and polishes that are made for a
basecoat/clearcoat paint nish on your vehicle.
Foreign materials such as calcium chloride and
other salts, ice melting agents, road oil and tar,
tree sap, bird droppings, chemicals from industrial
chimneys, etc., can damage your vehicle’s nish if
they remain on painted surfaces. Wash the vehicle
as soon as possible. If necessary, use non-abrasive
cleaners that are marked safe for painted surfaces
to remove foreign matter.
Exterior painted surfaces are subject to aging,
weather and chemical fallout that can take their
toll over a period of years. You can help to
keep the paint nish looking new by keeping your
vehicle garaged or covered whenever possible.
Protecting Exterior Bright Metal Parts
Bright metal parts should be cleaned regularly
to keep their luster. Washing with water is all
that is usually needed. However, you may use
chrome polish on chrome or stainless steel trim,
if necessary.Use special care with aluminum trim. To avoid
damaging protective trim, never use auto or
chrome polish, steam or caustic soap to clean
aluminum. A coating of wax, rubbed to high polish,
is recommended for all bright metal parts.
Windshield and Wiper Blades
Clean the outside of the windshield with glass
cleaner.
Clean the rubber blades using a lint free cloth
or paper towel soaked with windshield washer
uid or a mild detergent. Wash the windshield
thoroughly when cleaning the blades. Bugs, road
grime, sap, and a buildup of vehicle wash/wax
treatments may cause wiper streaking. Replace
the wiper blades if they are worn or damaged.
Wipers can be damaged by:
Extreme dusty conditions
Sand and salt
Heat and sun
Snow and ice, without proper removal
427

Scheduled Maintenance (cont’d)
Service MaintenanceIMaintenanceII
Perform any needed additional services. See “Additional Required Services”
in this section.••
Inspect suspension and steering components.See footnote (b).•
Inspect engine cooling system.See footnote (c).•
Inspect wiper blades.See footnote (d).•
Inspect restraint system components.See footnote (e).•
Lubricate body components.See footnote (f).•
Check transmission and transfer case uid levels and add uid as needed.•
Additional Required Services
The following services should be performed at the rst maintenance service (IorII) after the indicated miles
(kilometers) shown for each item.
Additional Required Services
Service and Miles (Kilometers)25,000
(40 000)50,000
(80 000)75,000
(120 000)100,000
(160 000)125,000
(200 000)150,000
(240 000)
Inspect fuel system for damage
or leaks.• •••••
Inspect exhaust system for loose
or damaged components.• •••••
444

Maintenance Footnotes
(a)Visually inspect brake lines and hoses for
proper hook-up, binding, leaks, cracks, chang,
etc. Inspect disc brake pads for wear and rotors
for surface condition. Inspect drum brake
linings/shoes for wear or cracks. Inspect other
brake parts, including drums, wheel cylinders,
calipers, parking brake, etc. Check parking
brake adjustment.
(b)Visually inspect front and rear suspension
and steering system for damaged, loose, or
missing parts or signs of wear. Inspect power
steering lines and hoses for proper hook-up,
binding, leaks, cracks, chang, etc. Visually check
constant velocity joints, rubber boots, and axle
seals for leaks.
(c)Visually inspect hoses and have them replaced
if they are cracked, swollen, or deteriorated.
Inspect all pipes, ttings, and clamps; replace
with genuine parts as needed. To help ensure
proper operation, a pressure test of the cooling
system and pressure cap and cleaning the outside
of the radiator and air conditioning condenser is
recommended at least once a year.(d)Inspect wiper blades for wear, cracking,
or contamination. Clean the windshield and wiper
blades, if contaminated. Replace wiper blades
that are worn or damaged. See Windshield
Wiper Blade Replacement on page 375and
Windshield and Wiper Blades on page 427for
more information.
(e)Make sure the safety belt reminder light and
all your belts, buckles, latch plates, retractors, and
anchorages are working properly. Look for any
other loose or damaged safety belt system parts.
If you see anything that might keep a safety
belt system from doing its job, have it repaired.
Have any torn or frayed safety belts replaced.
Also look for any opened or broken airbag
coverings, and have them repaired or replaced.
The airbag system does not need regular
maintenance.
(f)Lubricate all key lock cylinders, body door
and fuel door hinges, latches and locks (including
glove box and console doors), hood latch
assembly, secondary latch, pivots, spring anchor,
release pawl, and any moving seat hardware.
446

Normal Maintenance Replacement Parts
Replacement parts identied below by name, part number, or specication can be obtained from
your GM dealer.
Part GM Part Number ACDelco®Part Number
Engine Air Cleaner/Filter 15202408 A1624C
Engine Oil Filter
2.9L Engine 88984215 PF46
3.7L Engine 89017342 PF61
Spark Plugs 12598004 41-103
Windshield Wiper Blades
Driver’s Side — 22 inches (55 cm) 88958226 —
Passenger’s Side — 19 inches (48 cm) 88958228 —
454

A
Accessories and Modications..................... 324
Adding Equipment to Your Airbag-Equipped
Vehicle....................................................... 95
Additives, Fuel............................................ 326
Add-On Electrical Equipment....................... 432
Air Cleaner/Filter, Engine............................. 338
Air Conditioning........................................... 177
Airbag
Passenger Status Indicator....................... 186
Readiness Light....................................... 185
Airbag System............................................... 77
What Will You See After an
Airbag Inates?...................................... 86
When Should an Airbag Inate?................. 83
Where Are the Airbags?............................. 80
Airbag Systems
Adding Equipment to Your
Airbag-Equipped Vehicle......................... 95
How Does an Airbag Restrain?.................. 85
Passenger Sensing System....................... 88
Servicing Your Airbag-Equipped Vehicle..... 94
What Makes an Airbag Inate?.................. 85
AM-FM Radio.............................................. 209
Antenna, Fixed Mast................................... 244Antenna, XM™ Satellite Radio Antenna
System.................................................... 244
Anti-Lock Brake System.............................. 251
Anti-Lock Brake, System Warning Light....... 190
Appearance Care
Aluminum or Chrome-Plated Wheels........ 428
Care of Safety Belts................................ 425
Chemical Paint Spotting........................... 430
Cleaning Exterior Lamps/Lenses.............. 426
Cleaning the Inside of Your Vehicle.......... 422
Fabric/Carpet........................................... 423
Finish Care.............................................. 426
Finish Damage......................................... 429
Instrument Panel, Vinyl, and
Other Plastic Surfaces.......................... 425
Leather.................................................... 424
Sheet Metal Damage............................... 429
Tires........................................................ 429
Underbody Maintenance........................... 430
Vehicle Care/Appearance Materials.......... 431
Washing Your Vehicle.............................. 426
Weatherstrips........................................... 425
Windshield and Wiper Blades................... 427
Ashtray....................................................... 177
Assist Handles............................................ 154
481