differential CHEVROLET CRUZE LIMITED 2016 2.G Warranty Guide
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 2016, Model line: CRUZE LIMITED, Model: CHEVROLET CRUZE LIMITED 2016 2.GPages: 49, PDF Size: 0.46 MB
Page 10 of 49

Chevrolet Limited Warranty and Owner Assistance Information (GMNA-
Localizing-U.S-9159214) - 2016 - crc - 8/17/15
New Vehicle Limited Warranty 5
replacement procedure are covered
until the first scheduled
maintenance interval.
Diesel Components Coverage
includes:Parts of the Emissions
Reduction System such as the
emissions reduction fluid tank,
injectors, sensors including NOx
and exhaust, and the Exhaust
Particulate Filter. Glow Plug Control
System: Control/glow plug
assembly, glow plugs, cold advance
relay, and engine control module.
The fuel injection control module,
integral oil cooler, transmission
adapter plate, common fuel rails,
fuel filter assembly, fuel temperature
sensor, and function block.
Exclusions: Excluded from the
powertrain coverage are sensors,
wiring, connectors, engine radiator,
coolant hoses, coolant, and heater
core. Coverage on the engine
cooling system begins at the inlet to
the water pump and ends with the
thermostat housing and/or outlet
that attaches to the return hose.
Also excluded is the starter motor,
entire pressurized fuel system
(in-tank fuel pump, pressure lines, fuel rail(s), regulator, injectors, and
return line) as well as the Engine/
Powertrain Control Module and/or
module programming.
Transmission/Transaxle Coverage
includes:
All internally lubricated
parts, case, torque converter,
mounts, seals, and gaskets as well
as any electrical components
internal to the transmission/
transaxle. Also covered are any
actuators directly connected to the
transmission (slave cylinder, etc.).
Exclusions: Excluded from the
powertrain coverage are
transmission cooling lines, hoses,
radiator, sensors, wiring, and
electrical connectors. Also excluded
are the clutch and pressure plate as
well as any Transmission Control
Module and/or module
programming.
Transfer Case Coverage includes:
All internally lubricated parts, case,
mounts, seals, and gaskets as well
as any electrical components
internal to the transfer case. Also covered are any actuators directly
connected to the transfer case as
well as encoder motor.
Exclusions:
Excluded from the
powertrain coverage are transfer
case cooling lines, hoses, radiator,
sensors, wiring, and electrical
connectors as well as the transfer
case control module and/or module
programming.
Drive Systems Coverage
includes: All internally lubricated
parts, final drive housings, axle
shafts and bearings, constant
velocity joints, propeller shafts and
universal joints. All mounts,
supports, seals, and gaskets as well
as any electrical components
internal to the drive axle. Also
covered are any actuators directly
connected to the drive axle (e.g.,
front differential actuator).
Exclusions: Excluded from the
powertrain coverage are all wheel
bearings, drive wheel front and rear
hub bearings, locking hubs, drive
system cooling, lines, hoses,
radiator, sensors, wiring, and
electrical connectors related to drive