ABS CHEVROLET DURAMAX 2006 Owners Manual

•When the winter cover is used, the temperature
sensor found on the inside rearview mirror will not
function properly. The temperature that is shown will
be incorrect.
Installation Instructions
The following instructions explain how to install and
remove your vehicle’s winter cover. When installing
or removing the cover please refer to the “Usage
Guidelines” mentioned previously. When you first try to fit
the cover it may appear to be undersized. This is due to
the nature of the special vinyl, which will stretch during
installation to ensure a tight fit. For this reason, the initial
installation of the cover is best performed when the winter
cover is warm. If you are required to use a front license
plate, simply cut the black stitches on the back of the
patch.
Grille Cover Installation
1. Pre-bend all the small black tabs into the
shape of a J.
2. Fasten the snaps.
3. Wrap the elastic loop around the hood stopper.
4. Hook all the tabs to the edge of the grille.
5. Hook all clips to the bottom of the grille.
Lower Cover Installation
1. Pre-bend all of the small black tabs into the
shape of a J.
2. Fasten each tab to
edge of the bumper,
as illustrated.
To remove the winter cover, reverse the steps listed
previously.
2-7
ProCarManuals.com