CD player CHEVROLET LUMINA 1993 1.G Owners Manual
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 1993, Model line: LUMINA, Model: CHEVROLET LUMINA 1993 1.GPages: 324, PDF Size: 17.44 MB
Page 99 of 324
Downloaded from www.Manualslib.com manuals search engine 1 n this part you’ll find out how to
operate the comfort control systems and audio systems offered with your
Chevrolet
. Be sure to read about the
particular system supplied with your
vehicle
.
Heater Controls ........................................................................\
................................. 98
Air Conditioning ........................................................................\
................................ 99
Setting the Clock ........................................................................\
............................. 103
AM/FM Stereo Radio
........................................................................\
...................... 104
AM/FM Stereo Radio with Cassette Player
.......................................................... 106
AM/FM Stereo Radio with Cassette Player and BoseB Speakers ........................ 108
AM/FM Stereo with Compact Disc Player
............................................................. 110
Understanding Radio Reception
........................................................................\
..... 113
Care of Your Cassette Tape Player ........................................................................\
113
Care of Your Compact Discs ........................................................................\
........... 114
Fixed Mast Antenna ........................................................................\
....................... 114
Page 105 of 324
Downloaded from www.Manualslib.com manuals search engine Audio Systems
The following pages describe the audio
systems available for your Chevrolet,
and how to get the best performance
from them. Please read about the
system in your vehicle.
Hearing damage hrn loud
noise is almost undetectable
until it is too late. Your hearing can
adapt to higher volumes of sound.
Sound
that seems nod can be
loud and harmful to your hearing.
Take precautions by adjusting the
volume control on your radio to a
safe level before your hearing
adapts to it.
To help avoid hearing loss or
damage:
1. Adjust the volume mntrcd to the
2. Increase volume slowly until you
hear comfortably and clearly.
lowest settifig.
I
Before you add any sound
equipment to your ve
tape player,
CB radio,
Seffing the Clock
roperly. Added sound equipment No matter which audio system you have
in your vehicle, setting the clock is easy.
1. With the radio off or on and the
ignition on, press
SET. The SET
I
them. Ana, your'vehicle's systen,,
may interfere with the operatinn
nf
I sound equipment. that has bec
equipment, check with your dealer
and be sure to
c
iGdicator will appear on the digital
screen for five seconds.
I I 2. You must begin to set the clock to
the correct hour and minute during
those five seconds. Press and hold
SEEK until the correct minute
appears on the display.
3. Press and hold SCAN until the
correct hour appears on the display.
Page 108 of 324
Downloaded from www.Manualslib.com manuals search engine 1 Comfort Controls & Audio Systems
1
AMIFM Stereo Radio with
Cassette Player
The digital display indicates information
on time or radio station frequency, the
AM or FM radio band, whether the
station is in stereo, and other radio
functions.
TUNE-FADE This knob has two
functions. Turn it to the left or right to
I tune in radio stations (the radio station
VOL-BAL (Volume-Balance): Turn
the upper knob to turn the radio on or
off, or to change volume. Press it to
change between the clock and the radio
station frequency when the radio is on.
Press the knob to display the time when
the ignition
is off.
The control ring behind the VOL-BAL
knob adjusts the left/right speaker
balance. frequency will be displayed on
the
digital screen). Press the knob to
change between the
AM and FM bands.
The control ring behind the
TUNE-
FADE knob adjusts the fronthear
speaker balance.
TREB (Treble): Slide this lever up to
increase treble, or down to decrease it.
BASS: Slide this lever up to increase
bass, or down to decrease
it.
SCAN: Press to listen for a few
seconds to the next station on the
AM
or FM band; the scan will continue
every few seconds until
you press
SCAN again to stop on a particular
station.
You can also press the upper
knob
(VOLBAL) to stop the scan
SEEK: Each time press SEEK, you will
tune in the next station higher on the
radio
band.
Page 109 of 324
Downloaded from www.Manualslib.com manuals search engine To Preset Radio Stations:
The four pushbuttons labeled 1-4 can
be used to preset up to 14 radio stations
(seven
AM and seven FM) .
1. Use the lower knob (TUNE-FADE)
to tune in the station you want.
2. Press SET. The SET indicator will
appear on the digital screen for five
seconds.
3. While the SET indicator is displayed,
press one of the four pushbuttons.
4. Repeat steps 1-3 for each of four AM
and four FM stations.
Up to three additional stations
on each
band may be preset by “pairing”
pushbuttons:
1. Tune in the desired station.
2. Press SET, and within five seconds
press any two adjacent pushbuttons
at the same time.
3. The station can be tuned in when the
same
two pushbuttons are pressed at
the same time.
To Play a Cassette Tape:
With the power on, insert a tape into
the cassette door. Using tapes that are
longer than
90 minutes (45 minutes on
each side) is not recommended.
When the right indicator arrow is lit,
selections listed on the bottom side
of
the cassette are playing. When the left
arrow is lit, selections listed on the top
side of the cassette are playing. To
change sides of the tape, press the
upper control knob (VOL-BAL) while
the cassette is playing. The tape player
automatically begins playing the other
side when it reaches the end
of the tape.
Fast Forward Press the button with
the arrow pointing
in the same direction
that the tape is playing. To stop fast
forward, press the
STOP EJECT
button.
Reverse: Press the button with the
arrow pointing
in the opposite direction
that the tape is playing. To stop reverse,
press the
STOP EJECT button.
STOP EJECT: To stop playing a tape,
fully press this button. The cassette
will
be partially ejected, and the radio will
begin playing.
Page 110 of 324
Downloaded from www.Manualslib.com manuals search engine Comfort Controls & Audio Systems
'I
AMIFM Stereo Radio with
Cassette Player and
Base@ Silver
Series Speaker
System
The digital display indicates information
on time or radio station frequency, the
AM or FM radio band, whether the
station is in stereo, and other radio
functions.
VOL (Volume): Turn the upper knob
to turn the system on or
off and increase
or decrease volume.
I 08
TUNE-FADE To tune radio stations,
turn the lower knob. Press the knob to
switch between the
AM and FM bands.
Turn the control ring behind the lower
knob to adjust the front-rear speaker
balance.
RCLPROG (Recall-Program): Press
to switch the display between the time
and the station frequency.
SCAN: Press to listen for a few
seconds to the next station on the AM
or
FM band; the scan will continue
every few seconds until you press
SCAN again to stop on a particular
station.
You can also press the upper
knob
(VOL) to stop the scan.
SEEK: Press SEEK to tune the next
station on the radio band.
TREB (Treble): Adjusts the treble
level up or down.
BASS: Adjusts the bass level up or
down.
Page 111 of 324
Downloaded from www.Manualslib.com manuals search engine To Preset Radio Stations:
The four pushbuttons labeled 1-4 can
be used to preset up to
14 radio stations
(seven
AM and seven FM) .
1. Use the lower knob (TUNE-FADE)
to tune in the station you want.
2. Press SET. The SET indicator will
appear on the digital screen for five
seconds.
3. While the SET indicator is displayed,
press one of the four pushbuttons.
4. Repeat steps 1-3 for each of four AM
and four FM stations.
Up to three additional stations on each
band may be preset by "pairing"
pushbuttons:
1. Tune in the desired station.
2. Press SET, and within five seconds
press any
two adjacent pushbuttons
at the same time.
3. The station can be tuned in when the
same
two pushbuttons are pressed at
the same time.
To Play a Cassette Tape:
Your cassette tape player is designed to
work best with tapes that play for
30 to
45 minutes per side. Tapes that run
longer than that are
so thin they may
not work well
in this player.
With the unit on, press a cassette into
the slot marked
AUTO REVERSE, tape
side first. An arrow above the word
TAPE in the graphic display shows
which side of the tape is playing. Adjust
volume, balance, fade and tone as
described earlier in this part.
DNR This audio system has
automatic
00 Dolby B NR@ to reduce
background noise on Dolby encoded
tapes. Dolby@ Noise Reduction is
manufactured under license from Dolby
Laboratories Licensing
Corporation. Dolby@
and the 00
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
RCL-PROG (Recall-Program): Press
to switch from one side of the tape
to
the other. The unit switches
automatically at the end of a side.
CrO,: Press to adjust the unit for high
bias chrome or metal tapes. For
standard bias tapes, press again to
return to the factory-preset adjustment.
REV (Reverse): Press to rewind the
tape rapidly. The tape will stop at the
end, or when you press
FWD lightly.
The radio will play while the tape is
rewinding.
FWD (Forward): Press to advance the
tape rapidly. The tape will stop at the
end, or when you press
REV or
RCL-PROG lightly. The radio will play
while the tape is advancing.
SEARCH: Push this button to the
right. The
ON light will come on. Push
FWD to go to the beginning of the next
selection.
Push REV to back up to the
beginning of the current selection.
EJECT Press to remove the tape.
Page 112 of 324
Downloaded from www.Manualslib.com manuals search engine Comfort Controls & Audio Systems
AMIFM Stereo with Compact Disc
Player
The digital display indicates information on time or radio station frequency, the
AM or FM radio band, whether the
station is in stereo, and other radio
functions.
PWR-VOL (Power-Volume) : Turn
the upper knob to turn the unit on and
off when the ignition is on and to adjust
the volume up or down. The control behind
the upper knob lets
you adjust left-right speaker balance.
TUNE: Turn the lower knob to tune in
higher frequencies and lower
frequencies. Press the hob to switch
between the AM and FM bands.
The control behind the lower knob lets
you adjust the front-rear speaker
balance.
SEEK: Press to tune automatically to
the next station higher or lower on the
band. Press
SEEK, to tune stations
higher on the band. Press
+SEEK to
tune stations lower on the band.
SCAN: Press to listen for a few
seconds to the next station on the AM
or
FM band. The scan will continue
every few seconds until you press
SCAN again to stop on a particular
station.
RCL (Recall): Press to change
between the clock and the radio station
frequency displayed on the digital
screen.
BASS: Press up or down to increase or
decrease the bass.
TREB (Treble): Press up or down to
increase or decrease the treble.
110
Page 113 of 324
Downloaded from www.Manualslib.com manuals search engine To Preset Radio Stations:
The five pushbuttons can be used to
preset up to ten radio stations (five
AM and five FM stations). The
buttons have other uses when you are
playing a compact disc.
1. Tune the digital display to the station
2. Press SET. The SET indicator will
you want.
appear on the digital screen for five
seconds.
3. While the SET indicator is displayed,
press one of the five pushbuttons.
4. Repeat steps 1-3 for each of five AM
and five FM stations.
To Play a Compact Disc:
Many of the controls for the radio also
have functions for the compact disc
player, as explained here.
Don’t use mini-discs that are called
singles. They won’t eject. Use only full-
size compact discs.
1. Turn PWR-VOL to turn the unit on.
2. Insert a disc part-way into the slot,
with the label side up. The player
will pull it in. In a few seconds, the
disc should play. If
the disc comes back out:
The disc may be upside down.
The disc may be dirty, scratched or
wet.
There may be too much moisture in
the air (wait about one hour and try
again).
The player may be too hot, or the road
may be too rough for the disc to play.
While a disc is playing, the
CD
indicator is displayed on the digital
screen, as is the clock.
1
Page 114 of 324
Downloaded from www.Manualslib.com manuals search engine Comfort Controls & Audio Systems
'I
AMIFM Stereo with Compact Disc
Player (CONT.)
RCL (Recall): Press once to see which
track is playing. Press again within five
seconds to see how long your selection
has been playing. The track number
also will be displayed when the volume
is changed or a new track starts to play.
PRFN (Previous): Press to play a
track again.
If you keep pressing PREV,
the disc will keep backing up to
previous tracks.
NEXT: Press when you want to hear
the next track. If you keep pressing
NEXT, the disc will keep advancing to
other tracks.
I I2
REV (Reverse) : Press and hold to
rapidly back up to a favorite passage.
Release to resume playing.
FWD (Fast Forward): Press and hold
to rapidly advance the disc. Release
to
resume playing.
SCAN: Press to sample each track for
about ten seconds. Scanning
will
continue until you press SCAN again.
RDM (Random): Press to allow the
CD player to play the tracks in a
random order.
COMP (Compression): Depressing
this button makes
soft and loud
passages more equal in volume. Press
again to resume normal play.
When Finished with the Compact I
Disc Player:
If you turn off the power or turn off the
ignition, the disc will stay in the player
and start again when you turn on the
ignition or power switch. The disc will
begin playing at the point where it had
been stopped.
ST-PL (Stop-Play): Press to stop the I
disc player; the radio will play. Press
again to play the disc (the player will
start playing the disc where it was
stopped earlier).
EJCT (Eject): Press to eject the disc;
the radio will play.
Page 115 of 324
Downloaded from www.Manualslib.com manuals search engine Understanding Radio Reception
FM Stereo
FM Stereo will give you the best sound,
but
FM signals will reach only about 10
to
40 miles (16 to 65 km). Tall buildings
or hills can interfere with
FM signals,
causing the sound to come and go.
AM
The range for most AM stations is
greater than for FM, especially at night.
The longer range, however, can cause
stations to interfere with each other.
AM can also pick up noise from things
like storms and power lines.
To lower
this noise, try reducing the treble level.
AM Stereo
Your Delco@ system may be able to
receive C-Quam@ stereo broadcasts.
Many AM stations around the country
use C-Quam@ to produce stereo, though
some do not. C-Quam@
is a registered
trademark of Motorola, Inc. If your
Delco@ system can get C-Quam@ signals, your stereo indicator light
will
come on when you are receiving it.
Care of Your Cassette Tape
Player
A tape player that is not cleaned
regularly can cause reduced sound
quality, ruined cassettes, or a damaged
mechanism. Cassette tapes should be
stored in their cases away from
contaminants, direct sunlight, and
extreme heat. If they aren't, they may
not operate properly or cause failure of
the tape player.
Your tape player should be cleaned
regularly each month or after every
15
hours of use. If you notice a reduction
in sound quality,
try a known good
cassette to see if the tape or the tape
player is at fault. If this other cassette
has no improvement in sound quality,
clean the tape player.