high beam CHEVROLET S10 1997 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine Tilt Wheel (If Equipp-ed)
If you have the tilt steering
wheel, you
shou1.d adjust
the steering wheel before
you drive.
You can raise it. to the
highest level to give your
legs
more room when you
enter ,and exit the vehicle.
To tilt the. wheel, hold the steering wheel and puli the
lever
toward you, Move the steering wheel to a
comfortable level, then release the lever to lock the
wheel in place..
Do not adjust the steering wheel while driving,
Turn Sig-nal/Multifunction Lever
The lever on the left side of the steering column
-includes your:
Turn Signal and Lane Change Indicator
Headlamp High/Low Beam Changer
0 Windshield Wipers
0 Windshield Washer
0 Cruise Control (If Equipped)

Downloaded from www.Manualslib.com manuals search engine Turn and Lane Change Si,gnak
The turn signal has two upward (fat right) and- two
ciownwa~d
(for left) p??sitions. Tbese positions allow you
to signal a turn 0.r a.lane. change:
To signal -a turn, move the lever all the way up or down.
When the turn is finished, the lever will return aut~omatically.
An anow on. the instrume
panel will flash in the
direction
of the- turn or
lane change.
If a bulb is: burned.out, replace it.t-o help avoid an
acc.ident. If the arfows don’t g.0 on at all when you
sign-a1 a turn, check the fuse (see “Fu-se.s and Circuit
Breakersl’ in the .Ind.ex) and for burned-oat bulbs.
If you have n trailer towing option with -added wiring, for
the. traiier%mps, a d-ifferent turn :signal flasher is used.
With this flashes installed, the signal. indicator will flash
even if a.tum
signal bulb is burllid OW. Check the-ffont
an.d rear turn signal lamps -regularly tu make sure. they
are working.
Headl-amp High/Low Beam Changer
To change the headlamps from low to high-beam or
high to low-beam, pull the multifunction lever all the
way t.oward you. Then release it.
To signa1 a Lane change, j,ust raise- or lower the. lever
until the arrow starts to flash. Hold it there until you
Complete your lane,c,hangc, The kevei- will return by
itself when you release it.
As you signal a turn -or a lane c,hange, if the armws don’t
flash but just sxay on, a signal buIb may be burned Gut
arid other. drivers won’t ,see. your turn signal.. When the.’hi.gh-beam
headlamps are
on,. this
indicator
light .OM the
instrument pgniJ will
dso be on.
..
2-38

Downloaded from www.Manualslib.com manuals search engine Fog Lamps (If Equipped)
Use your fog lamps for better &ion in foggy or misty
conditi.ons. Your parking lamps or low-beam headlamps
must be on for your fog lamps to. work.
The fog lamp switch is on tne Instrument panel under
the
lamp switches. Press the side of the. switch with the
fog lamp symbol to turn the fog lamps on. Press OFF to
turn them off. A light will glow in the switch when the
fog lamps are on.
Remember, fog lamps alone will not give off as much
light
.as your headlamps. Never use your fog lamps in
the dark without turning on your headlamps.
Fog lamps will go off whenever your high-beam
headlamps come
on. When the high-beam headlamps go
off, the fog lamps will come on agah.
Interior Lamps
Brightness Control
Turn the.switch next to the headlamp switch up to
make your ,instrument panel and transfer case lights
brighter. Turn the switch all the way up to. turn on the.
interior lamps.
2-45
. . . .

Downloaded from www.Manualslib.com manuals search engine Replacement. -Bulbs
Lamps
Sea1e.d. Beam Halogen Hadlamps
Composite Low-Beahi Halogen Headlamps
Composite High-Beam Halogen Headlamps
Tail. and Stgplamps
Front Sidemarker Lamps
Fronf Turn Signal Lamps
Center High-Mounted Stoplamp
Underhood Lamp
Visor
Vanity Mirror Lamps
Quantity
1
4
Number
2El
9006 HB4
90.0.5 €433
3057
L94
3157NA
577
93.
74
4-67