ECU CHEVROLET TRACKER 1994 Owners Manual
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 1994, Model line: TRACKER, Model: CHEVROLET TRACKER 1994Pages: 258, PDF Size: 14.43 MB
Page 15 of 258

Seats and Restraint Systems
4. Unlock the bottom part of the seat.
On the one-piece rear seat, pull ou
On the split rear sear, lift the
the release
ring.
release lever on either seat.
5. Lift the bottom of the seat up and pus1
it toward the front of the vehicle.
i. Find the support bar on the bottom of
the seat. This bar keeps the rear seat
from unfolding.
’. Pull the inner end of the support off of
the seat bracket and swing it down.
’. Push the support bar into the floor
bracket.
Be sure the support bar is
secured.
‘0 unfold the seat:
ieep your hands, safety
belts and other
bjects away from where the seat
will
:st.
Pull the support bar out of the floor
bracket and swing
it up and toward the
bottom of the seat.
Push the support bar into the bracket
on the bottom
of the seat.
Slowly pull the seat down to
the floor.
The seat should latch into place. Pull
up
on the bottom of the seat to be sure
it is locked in position.
Pull the seatback
up and push it back.
Push and pull the
top of the seatback
to
be sure it is locked in place.
. . .I4
ProCarManuals.com
Page 21 of 258

Seats and Restraint Systems
First, you’ll want to know which restraint
systems
your vehicle has.
We’ll start with the driver position.
Driver Position
This section describes the driver’s
restraint system.
Lap-Shoulder Belt
The driver has a lap-shouldcr bclt. Here‘s
how 10 wear il properly.
1. Close and lock the door.
2. Adjust the seat (to see how, see
“Seats”
in the Index) so you can sit up
straight.
3. Pick up the latch plate and pull the
belt across you. Don’t
let it get
twisted.
4. Push the latch plate into the buckle
until it clicks.
Pull up
on the latch plate to make sure
it is secure. If the belt isn’t long
enough, see “Safety Belt Extender” at
the end of
this section.
Make sure the release button on the
buckle is positioned
so you would be
able
to unbuckle the safety belt
quickly
if you ever had to.
... 20
ProCarManuals.com
Page 25 of 258

Seats and Restraint Systems
L
Rear Seat Passengers
It‘s very important for rear seat
passengers
to buckle up! Accident
statistics show that unbelted people in the
rear seat are hurt more often
in crashes
than those who are wearing safety belts.
Rear passengers who aren’t safety belted
can be thrown
out of the vehicle in a
crash. And
they can strike others in the
vehicle who are wearing safety belts.
Lap-Shoulder Belt
The rear seats have lap-shoulder belts.
Here’s how
to wear one properly.
1. Pick up the latch plate and pull the
belt across you. Don’t
let it get
twisted.
2. Push the latch plate into the buckle
until it clicks.
Pull up on the latch plate to make sure it
is secure.
When the shoulder belt
is pulled out all
the way,
it will lock. If it does, let it go
back all the way and start again.
If the belt is not long eqough, see “Safety
Belt Extender” at the end of this section.
Make sure the release button
on the
buckle is positioned
so you would be able
to unbuckle the safety belt quickly
if you
ever had to.
... 24
ProCarManuals.com
Page 28 of 258

1 Child Restraints
Be sure to follow the instructions for the
restraint. You may find these
instructions on the restraint itself or
in a
booklet, or both. These restraints
use the
belt system in your vehicle, but the child
also has to be secured
within the
restraint to help reduce the chance
of
personal injury. The instructions that
come
with the infant or child restraint
will show you how to do that.
Where to Put the Restraint
Accident statistics show that children are
safer if they are restrained
in the rear
rather than the front seat. We at General
Motors therefore recommend that
you
put your child restraint in the rear seat
unless the child is an infant and you’re
the only adult
in the vehicle. In that
case,
you might want to secure the
restraint
in the front seat where you can
keep an eye on the baby.
Wherever you install
it, be sure to secure
the child restraint properly.
Keep
in mind that an unsecured child
restraint can move around
in a collision
or sudden stop and injure people
in the
vehicle.
Be sure to properly secure any
child restraint
in your vehicle - even
when no child is
in it.
27 ...
ProCarManuals.com
Page 29 of 258

Seats and Restraint Systems
Top Strap
If your child restraint has a top strap, it
should be anchored.
Securing a Child Restraint in the Rear
Seat
You'll be using the lap-shoulder belt. See
the earlier section
about the top strap if
the child restraint has one.
1. Put the restraint on the seat. Follow
the instructions for the child restraint.
2. Secure the child in the child restraint
as the instructions say.
3. Pick up the latch plate, and run the lap
and shoulder portions of the vehicle's
safety belt through or around the
restraint. The child restraint
instructions
will show you how.
If the shoulder belt goes in front of the
child's face
or neck, put it behind the
child restraint.
4. Buckle the belt. Make sure the release
button is positioned
so you would be
able to unbuckle the safety belt
quickly
if you ever had to.
... 28
ProCarManuals.com
Page 30 of 258

1
5. Pull the rest of the shoulder belt all the
way out of the retractor to set the lock. 6. To tighten the belt, feed the shoulder
belt into the retractor while you push
down on the child restraint. 7. Push and pull the child restraint in
different directions to be sure it is
secure.
To remove the child restraint, just
unbuckle the vehicle’s safety belt and let
it
go back all the way. The safety belt will
move freely again and be ready to work
for an adult or larger child passenger.
29 ...
ProCarManuals.com
Page 31 of 258

Seats and Restraint Systems
Securing a Child Restraint in the Right
Front Seat
You'll be using the lap-shoulder belt. See
the earlier section
about the top strap if
the child restraint has one.
1. This is the only place in your vehicle
where
you can use a child restraint
with a top strap.
2. Put the restraint on the seat. Follow
the instructions for the child restraint.
3. Secure the child in the child restraint
as the instructions say.
4. Pick up the latch plate, and run the lap
and shoulder portions of the vehicle's
safety belt through or around the
restraint. The child restraint
instructions
will
show you how.
If the shoulder belt goes in front of the
child's face or neck,
put it behind the
child restraint.
5. Buckle the belt.
Make sure the release button is
positioned
so you would be able to
unbuckle the safety belt quickly if you
ever
had to.
... 30
ProCarManuals.com
Page 32 of 258

6. Pull the rest of the shoulder belt all the
way out of the retractor to set the lock.
L'
7. To tighten the belt, feed the shoulder
belt back into the retractor while
you
push down on the child restraint.
8. Push and pull the child restraint in
different directions
to be sure it is
secure.
To remove the child restraint, just
unbuckle the vehicle's safety belt and let
it go back all the way.
The safety belt will move freely again anc
be ready to work for an adult or larger
child passenger.
31 ...
ProCarManuals.com
Page 76 of 258

5. Unfasten the holding strap near the
dome light and pull
it through the slot
in the front top bow.
6. Fasten the holding strap to itself.
7. Push the front top bow latches down
8. Swing your sun visors up and raise
Reverse the steps
to close your sunroof.
Be sure
your front top bow is latched
securely. until they “click.“
your antenna.
“\
Opening and Closing Your Rear
Window
Make sure your rear window is clean
before you
try to remove it. See “Special
Care
of Canvas Top” in the Index.
1. Unfaten the lower right corner flap t(
uncover the zipper pull. Unzip the rear window.
If the zipper is
hard to move, you can lubricate it with
beeswax, bar soap or silicone spray.
Remove the window.
/3.. . ProCarManuals.com
Page 81 of 258

Features and Controls
16. Pull up and back on the rear top bow
struts and swing each strut forward.
17. Clamp the struts to the rear top bow.
~~ ~
18. Swing down the rear top bow and
secure
it with the strap at the inside
center
of your tailgate.
lock
it in place.
19. Pull the front top bow forward and
teverse the steps to install your canvas
op. Be sure:
b
b
b
The front top bow is securely latched.
The rear side window frames are
installed all the way into
the corners
of the canvas.
The rear side window frames are
clamped to the body.
The rear straps on the side window
frames are snapped.
The rear top bow struts are secure
in
their proper place.
I
'reparing Your Canvas Top for
;torage
. Lay the canvas top inside-up on a
clean, dry, flat surface.
... 80
ProCarManuals.com