tow bar CHEVROLET TRACKER 1996 Owners Manual

4. Unlock the bottom part of the seat:
0 On the one-piece rear seat, pull out the
0 On the split rear seat, lift the release lever on
release
ring.
either seat.
5. Lift the bottom
of the seat up and push it toward the
front of the vehicle.
6. Find the support bar on the bottom of the seat. This
bar keeps the rear seat from unfolding.
7. Pull the inner end of the support off of the seat
bracket and swing it down.
1-7
ProCarManuals.com

8. Attach support bar to the floor bracket.
To unfold the seat:
Keep your hands, safety belts
and other objects away
from where
the seat will rest.
1.
2.
3.
4.
Pull the support bar out of the floor bracket and
swing
it up and toward the bottom of the seat.
Push and secure the support bar into the bracket
on
the bottom of the seat.
Slowly pull the seat down to the
floor. The seat
should latch into place. Pull up
on the bottom of the
seat to be sure
it is locked in position.
Pull
the seatback up and push it back to lock it into
place. Push and pull the top of the seatback
to be
sure the seatback is locked in position.
1-8
ProCarManuals.com

A towing dolly must be used under the drive wheels
when towing
from the fvont.
Attach J-hook chains on both sides to the rear of lower
control arms inboard
of the spring. Position
a 4” x 4” wood
beam across the sling chains
and against
the lower control arm front attachment
brackets. Position the lower sling crossbar in front and
against the
4” x 4” wood beam.
- 5-9
ProCarManuals.com