tow CHEVROLET TRACKER 2002 2.G Owner's Manual

3-2
Comfort Controls
With this system, you can control the heating, cooling
and ventilation in your vehicle.
Your vehicle also has the flow
-through ventilation
system described later in this section.
Climate Control System
Airflow Lever
(Vent): This position directs the airflow through the
instrument panel vents.
(Bi-level): This position directs air through the
instrument panel vents and toward the floor.
(Floor): This position directs air toward the floor
and through the right and left side vents. The side vents
can be shut off by closing the thumbwheel to allow for
more air to be directed toward the floor.
(Defog): This position directs air toward the floor,
the windshield and side windows. The air also comes
from both vents at the ends of the instrument panel
if the thumbwheel below them is in the open position.
The air conditioning compressor will run automatically
in this setting without pressing A/C.
(Defrost): This position directs air to the
windshield and side windows. The air also comes
from both vents at the ends of the instrument panel
if the thumbwheel below them is in the open position.
The air conditioning compressor will run automatically
in this setting without pressing A/C.
For maximum defrosting and defogging, adjust the
temperature control lever to the hot end, move the
air intake lever to outside air and shut off airflow to
the outside instrument panel vents by closing the
thumbwheels to increase air through the side
defroster vents.

3-3
Fan Lever
Slide the lever located on the upper right side away from
OFF to turn the system on. Move the lever toward the
fan symbol to increase the fan's speed.
Temperature Lever
Slide the lever located on the lower left side to change
the temperature of the air flowing from the system.
Move it to the right for warmer air and to the left for
cooler air. Without air conditioning, the air temperature
cannot be less than the outside air temperature.
Air Intake Lever
(Recirculate): Choose this position to recirculate
the inside air through the comfort control system.
(Outside Air): Choose this position to circulate
outside air through the comfort control system.
Air Conditioner Controls
The air conditioning
system uses the same
controls as described
previously. The function
of each lever is explained
under ªClimate Control
Systemº in this part.
When on, the incoming
air will be cooled
and dehumidified.
A/C (Air Conditioning): Press the A/C button to
change your comfort control system to air conditioning.
A light will come on in the button when the air
conditioning is on. Air conditioning can also control
the humidity in your vehicle.
The air conditioner works best if you keep your
windows closed. On very hot days, open the
windows just long enough for the hot air to escape.

3-4
For normal cooling, press the A/C button and slide the
air intake lever to outside air. For faster cooling, slide
the lever to recirculate. Then slide the airflow lever to
vent, the temperature lever toward the left and the fan
lever toward the fan symbol.
On days when it is raining or the humidity is high,
follow these dehumidifying steps to help clean
windows that are cloudy with moisture.
1. Slide the air intake lever to outside air.
2. Slide the airflow lever to defrost and the fan lever
toward the fan symbol.
3. Adjust the temperature lever to a comfortable setting.
The air conditioning compressor will run automatically
when the airflow lever is in defog or defrost. The A/C
button will illuminate, only if it is pressed, in the defog
or defrost modes.Heating
For the quickest results, slide the air intake lever
to recirculate. Slide the airflow lever to floor, the
temperature lever toward the right for warmer air and
the fan lever toward the fan symbol. You should switch
to outside air once in a while to avoid stale air and
cloudy windows.
Defogging and Defrosting
Slide the air intake lever to outside air and the airflow
lever to defrost to direct air to the windshield vents.
Then slide the temperature lever toward the right and the
fan lever toward the fan symbol. When the windshield is
clear, turn down the fan speed.

3-6 Ventilation System
For mild outside temperatures, when little heating or
cooling is needed, you can direct outside air through
your vehicle.
Slide the air intake lever to outside air and the airflow
lever to bi
-level. Adjust the temperature control lever to
a comfortable setting and slide the fan lever toward the
fan symbol.
Your vehicle's flow
-through ventilation system
supplies outside air into the vehicle when it is moving.
Outside air will also enter the vehicle when the fan is
running and the air intake lever is at outside air.
Your vehicle has air outlets
that allow you to adjust the
direction and amount of
airflow inside the vehicle.You can direct the airflow side
-to-side by moving the
control located in the center of the vent. The vent can
be tilted up and down also. To control the amount of
airflow though the outlets, turn the thumbwheel below
the vent. The airflow from this vent cannot be controlled
by the airflow lever.
Ventilation Tips
Keep the hood and front air inlet free of ice, snow or
any other obstruction (such as leaves). The heater and
defroster will work far better, reducing the chance of
fogging the inside of your windows.
When you enter a vehicle in cold weather, move the fan
control lever toward the fan symbol for a few moments
before driving off. This helps clear the intake ducts of
snow and moisture, and reduces the chance of fogging
the inside of your windows.
Keep the air path under the front seats clear of objects.
This helps air to circulate throughout your vehicle.

3-9
To adjust the treble, press and release the AUDIO button
until TRE appears on the display. Then press and hold
the up arrow to increase treble. T and a positive number
will appear on the display. Press and hold the down
arrow to decrease treble. T and a negative number will
appear on the display. T and a zero will appear on the
display when the treble level is adjusted to the middle
position. Release the up or down arrow when you find
the treble level you want or when the maximum or
minimum level is reached. If a station is weak or noisy,
you may want to decrease the treble.
To adjust bass or treble to the middle position, select
BAS or TRE. Then press and hold the AUDIO button
for more than two seconds until you hear a beep.
B and a zero or T and a zero will appear on the display.
To adjust both tone controls and both speaker controls
to the middle position, end out of audio mode by
pressing another button, which the radio will perform
that function, or by waiting five seconds which the
radio will go to the clock display. Then press and hold
the AUDIO button for more than two seconds until
you hear a beep. CEN will appear on the display.Adjusting the Speakers (Balance/Fade)
AUDIO: To adjust the balance between the right and
left speakers, press and release the AUDIO button until
BAL appears on the display. Then press and hold the
up arrow to move the sound to the right speakers or
the down arrow to move the sound to the left speakers.
R and a number will appear on the display when the
sound is balanced toward the right speakers. L and a
number will appear on the display when the sound is
balanced toward the left speakers. L and a zero will
appear on the display when the sound is balanced
between the speakers. Release the up or down arrow
when you find the speaker balance you want or when
the maximum or minimum level is reached.
To adjust the fade between the front and rear speakers,
press and release the AUDIO button until FAD appears
on the display. Then press and hold the up arrow to
move the sound to the front speakers or the down arrow
to move the sound to the rear speakers. F and a number
will appear on the display when the sound is balanced
toward the front speakers. R and a number will appear
on the display when the sound is balanced toward the
rear speakers. F and a zero will appear on the display
when the sound is balanced between the speakers.
Release the up or down arrow when you find the
speaker balance you want or when the maximum or
minimum level is reached.

4-
4-1
Section 4 Your Driving and the Road
Here you'll find information about driving on different kinds of roads and in varying weather conditions. We've also
included many other useful tips on driving.
4
-2 Your Driving, the Road and Your Vehicle
4
-3 Defensive Driving
4
-4 Drunken Driving
4
-7 Control of a Vehicle
4
-7 Braking
4
-11 Steering
4
-13 Off-Road Recovery
4
-13 Passing
4
-15 Loss of Control
4
-16 Off-Road Driving with Your
Four
-Wheel-Drive Vehicle4
-30 Driving at Night
4
-32 Driving in Rain and on Wet Roads
4
-35 City Driving
4
-36 Freeway Driving
4
-37 Before Leaving on a Long Trip
4
-38 Highway Hypnosis
4
-38 Hill and Mountain Roads
4
-40 Winter Driving
4
-44 Recreational Vehicle Towing
4
-48 Loading Your Vehicle
4
-50 Towing a Trailer

4-44
Recreational Vehicle Towing
Recreational vehicle towing means towing your vehicle
behind another vehicle
-- such as behind a motorhome.
The two most common types of recreational vehicle towing
are known as ªdinghy towingº (towing your vehicle
with all four wheels on the ground) and ªdolly towingº
(towing your vehicle with two wheels on the ground and
two wheels up on a device known as a ªdollyº).
With the proper preparation and equipment, many
vehicles can be towed in these ways. See ªDinghy
Towingº and ªDolly Towing,º following.
Here are some important things to consider before you
do recreational vehicle towing:

What's the towing capacity of the towing vehicle?
Be sure you read the tow vehicle manufacturer's
recommendations.

How far will you tow? Some vehicles have
restrictions on how far and how long they can tow.

Do you have the proper towing equipment? See your
dealer or trailering professional for additional advice
and equipment recommendations.

Is your vehicle ready to be towed? Just as you would
prepare your vehicle for a long trip, you'll want to
make sure your vehicle is prepared to be towed.
See ªBefore Leaving on a Long Tripº in the Index.
Dinghy Towing Four-Wheel-Drive Only
To tow your vehicle from the front (four-wheel-drive only),
do the following:
NOTICE:
If your vehicle is a two-wheel drive model,
do not tow it on all four wheels. If you do, your
transmission could be damaged and the damage
would not be covered by your warranty.

4-45
Follow these steps:
1. Set the parking brake.
2. Shift your automatic transmission into PARK (P),
or your manual transmission to SECOND (2).
3. With the ignition key in the ON position, move the
transfer case to NEUTRAL and make sure the
4WD light on the instrument panel cluster is off.
See ªFour
-Wheel Driveº in the Index.
4. Turn the ignition key to ACC to unlock the
steering wheel.
5. Release the parking brake.
NOTICE:
If you tow your four-wheel-drive vehicle from
the front, make sure to move the transfer case
into NEUTRAL or your vehicle could be badly
damaged and the damage would not be covered
by your warranty.
Stop towing every 200 miles (300 km) and start the
engine. Leave the transfer case shift lever in NEUTRAL.
Shift your automatic transmission to DRIVE (D); leave
a manual transmission in SECOND (2) with the clutch
engaged. Run the engine at medium speed for one minute
to circulate oil in the transfer case. Turn the ignition key
to ACC. Now, you can continue towing your vehicle.
NOTICE:
The front wheels transmit shocks during towing.
The steering column may not be strong enough to
withstand the shocks. Always unlock the steering
wheel before towing.
NOTICE:
Make sure that the towing speed does not
exceed 55 mph (90 km/h), or your vehicle could
be badly damaged.

4-46
CAUTION:
Shifting a four-wheel-drive vehicle's transfer
case into NEUTRAL can cause your vehicle to
roll even if the transmission is in Park (P), for an
automatic transmission, or if your vehicle is in
gear, for a manual transmission. You or others
could be injured. Make sure the parking brake
is firmly set before you shift the transfer case
to NEUTRAL.
Dolly Towing
To tow your vehicle from the rear, do the following:

4-47
The best way to tow your vehicle is from the rear.
Follow these steps:
1. Put the rear wheels on a dolly.
NOTICE:
Do not tow your vehicle with the rear wheels
in contact with the ground, or the transmission
could be damaged.
2. If your vehicle is a four-wheel-drive vehicle,
turn the ignition key to ON, move the transfer
case lever into NEUTRAL and make sure the 4WD
light on the instrument panel cluster is turned off.
See ªFour
-Wheel Driveº in the Index.
3. Turn the ignition key to ACC to unlock the
steering wheel.
4. Make sure the front wheels are facing straight
forward and secure the steering wheel with a
steering wheel clamping device designed for towing.
NOTICE:
Make sure that the towing speed does not
exceed 55 mph (90 km/h), or your vehicle could
be badly damaged.
CAUTION:
Shifting a four-wheel-drive vehicle's transfer
case into NEUTRAL can cause your vehicle to
roll even if the transmission is in PARK (P), for
an automatic transmission, or if your vehicle is
in gear, for a manual transmission. You or others
could be injured. Make sure the parking brake
is firmly set before you shift the transfer case
into NEUTRAL.