CHEVROLET VENTURE 1998 Owners Manual

Top Strap
There's a vinyl sleeve there; to get to the bracket, push this
vinyl sleeve aside slightly. You may need to remove the
staple
in the sleeve to do this. Anchor the top strap to the
bracket.
If your vehicle does not have third row seats and
If your child restraint has a top strap,
it should be
anchored. A child restraint with a top should only belts, or if you need to have an anchor bracket installed for
be used in the second row. If your vehicle has third row the center bucket seat in the second row, or for the right-ha\
nd
seats, anchor brackets for the second row outside
side
of a 60140 bench seat, you can ask your Chevrolet dealer
positions are located just above the place where the third
to put it in for you. you want to install an anchor bracket
row lap-shoulder belts meet the floor.
yourself, your dealer can tell you how to do it.
Once you have the top strap anchored, you'll be ready to
secure the child restraint itself.
ProCarManuals.com

Securing a Child Restraint in a Rear
Outside Seat Position You’ll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has one. Be sure
to follow the instructions that came with the child
restraint. Secure the child in the child restraint when and
as the instructions say.
1. Put the restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions
of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.
If the shoulder belt goes in front of the child’s face or
neck, put
it behind the child restraint.
1-89
ProCarManuals.com

I
3. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly
if you ever had to.
4. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock.
1-90
ProCarManuals.com

5.
6.
To tighten the belt, feed the shoulder belt back into
the retractor while you push down on the child
restraint. If you’re using a forward-facing child
restraint, you may find it helpful to use your knee to
push down on the child restraint as you tighten
the belt.
Push
and pull the child restraint in different
directions to be sure it is secure. To
remove the child restraint, just unbuckle the vehicle’s
safety belt and let
it go back all the way. The safety belt
will move freely again
and be ready to work for an adult
or larger child passenger.
Securing a Child Restraint in the Center Seat Position (Third
Row Bench Seat)
n
You’ll be using the lap belt. Be sure to follow the
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.
1-91
ProCarManuals.com

See the earlier part about the top strap if the child
restraint has
one.
1. Make the belt as long as possible by tilting the latch
2. Put the restraint on the seat.
3. Run the vehicle's safety belt through or around the
restraint. The child restraint instructions will show
you how.
plate and pulling
it along the belt.
4.
5.
Buckle the belt. Make sure the release button
is
positioned
so you would be able to unbuckle the
safety belt quickly
if you ever had to.
To tighten the belt, pull its free end while you push
down on the child restraint. If you're using a
forward-facing child restraint,
you may find it
helpful to use your knee to push
down on the child
restraint as you tighten the belt.
1-92
ProCarManuals.com

6. Push and pull the child restraint in different
directions
to be sure it is secure.
To remove the child restraint, just unbuckle the vehicle’s
safety belt. It will be ready to work
for an adult or larger
child passenger.
Securing a Child Restraint in the Center
Seat Position (Bucket
Seat)
You’ll be using the lap belt. See the earlier part about
the top strap
if the child restraint has one. Be sure to
follow the instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions
say.
1. Put the restraint on the seat.
2. Pull the lap belt all the way out without stopping.
3. While holding it out, run the belt through or around
the child restraint. The child restraint instructions
will show you how.
ProCarManuals.com

4. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly if you ever had to.
5. To tighten the belt, feed it back into the retractor
while you push down on the child restraint.
If you’re
using a forward-facing child restraint, you may find
it helpful to use your knee to push down on
the child
restraint as you tighten the belt.
directions to be sure
it is secure.
6. Push and pull the child restraint in different
1-94
ProCarManuals.com

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it
go back all the way. The safety belt
will
move freely again and be ready to work for an adult
or larger child passenger.
Securing a Child Restraint in the Right
Front Seat Position
Your vehicle has a front passenger air bag. Never put a
rear-facing child restraint in this seat. Here’s why:
I
A child in a rearfacing child restraint can be
seriously injured or killed
if the front passenger’s
air bag inflates, even though your vehicle has
reduced-force frontal air bags. This is because
the back of a rear-facing child restraint would be
very close to the inflating air bag.
If your vehicle
is a passenger van, always secure a rearfacing
child restraint in
a rear seat.
If your vehicle is a cargo van, do not use a
rear-facing child restraint in this vehicle. If a
forward-facing child restraint is suitable for your
child, always move the passenger seat
as far back
as it will go.
1-95
ProCarManuals.com

You'll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has one. Be sure
to follow the instructions that came with the child
restraint. Secure the child in the child restraint when and
as the instructions say.
1. Because your vehicle has a front passenger air bag,
always move the seat
as far back as it will go before
securing a forward-facing child restraint. (See
"Seats" in the Index.)
2. Put the restraint on the seat.
3. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle's safety belt through or
around the restraint. The child restraint instructions
will show you how.
If the shoulder belt goes in front of the child's face or
neck, put
it behind the child restraint. 4. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly if
you ever had to.
1-96
ProCarManuals.com

5. Pull the rest of the shoulder belt all the way out of
the retractor to set the lock.
6. To tighten the belt, feed the shoulder belt back into the
retractor while you push down on
the child restraint.
You may find it helpful to use
your knee to push down
on the child restraint as you tighten the belt.
directions to be sure it
is secure.
7. Push and pull the child restraint in different
To remove the child restraint, just unbuckle the vehicle's
safety belt and let it
go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
ProCarManuals.com