jump cable CHRYSLER 200 2011 1.G Owners Manual

CHRYSLER 200 2011 1.G Owners Manual 200 2011 1.G CHRYSLER CHRYSLER https://www.carmanualsonline.info/img/25/8392/w960_8392-0.png CHRYSLER 200 2011 1.G Owners Manual

Page 291 of 490

CHRYSLER 200 2011 1.G Owners Manual For vehicles equipped with Tip Start (Six-Speed Trans-
mission),turn the ignition switch to the START position
and release it as soon as the starter engages. The starter
motor will continue to run, an

Page 383 of 490

CHRYSLER 200 2011 1.G Owners Manual each nut has been tightened twice. The correct wheel nut
torque is 100 ft lbs (135 N·m). If you doubt that you have
tightened the nuts correctly, have them checked with a
torque wrench by your author

Page 385 of 490

CHRYSLER 200 2011 1.G Owners Manual WARNING!
•Take care to avoid the radiator cooling fan when-
ever the hood is raised. It can start anytime the
ignition switch is on. You can be injured by
moving fan blades.
•Remove any metal jewe

Page 386 of 490

CHRYSLER 200 2011 1.G Owners Manual WARNING!
Do not allow vehicles to touch each other as this
could establish a ground connection and personal
injury could result.
Jump-Starting Procedure
WARNING!
Failure to follow this procedure could

Page 387 of 490

CHRYSLER 200 2011 1.G Owners Manual 5. Start the engine in the vehicle that has the booster
battery, let the engine idle a few minutes, and then start
the engine in the vehicle with the discharged battery.
Once the engine is started, re