wiper blades CHRYSLER PT CRUISER 2008 1.G Owners Manual

â–«Maintenance-Free Battery ................392
â–« Air Conditioner Maintenance .............393
▫ Power Steering – Fluid Check ............394
â–« Front Suspension Ball Joints ..............395
â–« Steering Linkage ......................395
â–« Body Lubrication .....................395
â–« Windshield Wiper Blades ................396
â–« Windshield Washer Reservoir .............396
â–« Exhaust System ......................397
â–« Cooling System .......................398
â–« Hoses And Vacuum/Vapor Harnesses .......403
â–« Fuel System Connections ................404
â–« Brake System ........................404 â–«
Automatic Transaxle ...................408
â–« Manual Transaxle .....................410
â–« Appearance Care And Protection From
Corrosion ...........................411
 Convertible Top Care ....................416
â–« Washing ............................416
â–« General Cleaning .....................417
â–« Cloth Top Additional Cleaning Procedure ....418
â–« Cloth Top Protection ...................418
â–« Weather Strip Care ....................418
 Integrated Power Module (IPM) ............419
 Vehicle Storage ........................423
 Replacement Bulbs ......................424
376 MAINTAINING YOUR VEHICLE

amount of a high quality lubricant such as MoparLock
Cylinder Lubricant directly into the lock cylinder.WINDSHIELD WIPER BLADESClean the rubber edges of the wiper blades and the
windshield periodically with a sponge or soft cloth and a
mild non abrasive cleaner or use the washer solvent. This
will remove accumulations of salt, waxes or road film
and help reduce streaking and smearing.
Operation of the wipers on dry glass for long periods
may cause deterioration of the wiper blades. Always use
washer fluid when using the wipers to remove salt or dirt
from a dry windshield. Avoid using the wiper blades to
remove frost or ice from the windshield. make sure that
they are not frozen to the glass before turning them on to
avoid damaging the blade. Keep the blade rubber out of
contact with petroleum products such as engine oil,
gasoline, etc.
Windshield Wiper Blade Replacement1. Lift the wiper arm away from the glass.
2. Push the release tab shown in the illustration and slide
the wiper blade assembly down along the arm. Gently
place the wiper arm on the windshield.
3. Install the new blade assembly onto the wiper arm tip
until it locks in place.
NOTE: Always refer to the wiper blade packaging for
specific installation instructions. Many wiper blade re-
placements fit multiple vehicles.WINDSHIELD WASHER RESERVOIRNOTE: Always refer to the wiper blade packaging for
specific installation instructions. Many wiper blade re-
placements fit multiple vehicles.
The washer fluid reservoir is located in the rear of the
engine compartment on the passenger side and should be
396 MAINTAINING YOUR VEHICLE