service indicator CHRYSLER SEBRING SEDAN 2010 3.G User Guide

ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated Onboard
Diagnostic system called OBD II. This system monitors
the performance of the emissions, engine, and automatic
transaxle control systems. When these systems are oper-
ating properly, your vehicle will provide excellent per-
formance and fuel economy, as well as maintaining
engine emissions well within current government regu-
lations.
If any of these systems require service, the OBD II system
will turn on the Malfunction Indicator Light (MIL). It will
also store diagnostic codes and other information to
assist an authorized service technician in making repairs.
Although your vehicle will usually be drivable and not
need towing, see your authorized dealer for service as
soon as possible.CAUTION!
•Prolonged driving with the “Malfunction Indica-
tor Light” on could cause further damage to the
emission control system. It could also affect fuel
economy and driveability. The vehicle must be
serviced before any emissions tests can be per-
formed.
•If the “Malfunction Indicator Light” is flashing
while the engine is running, severe catalytic con-
verter damage and power loss will soon occur.
Immediate service is required.
Loose Fuel Filler Cap Message
After fuel is added, the vehicle diagnostic system can
determine if the fuel filler cap is possibly loose or
improperly installed. A “GASCAP” message will be
displayed in the instrument cluster. Tighten the gas cap
until aclicking sound is heard. This is an indication that
338 MAINTAINING YOUR VEHICLE

the gas cap is properly tightened. Press the trip odometer
“Reset” button to turn off the message. If the problem
persists, the message will appear the next time the
vehicle is started. This might indicate a damaged cap. If
the problem is detected twice in a row, the system will
turn on the “Malfunction Indicator Light (MIL).” Resolv-
ing the problem will turn the MIL light off.
EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS
In some localities, it may be a legal requirement to pass
an inspection of your vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.For states that require an Inspection and Mainte-
nance (I/M), this check verifies the “Malfunction
Indicator Light (MIL)” is functioning and is not
on when the engine is running, and that the OBD II
system is ready for testing. Normally, the OBD II system will be ready. The OBD II
system may
notbe ready if your vehicle was recently
serviced, recently had a dead battery or a battery replace-
ment. If the OBD II system should be determined not
ready for the I/M test, your vehicle may fail the test.
Your vehicle has a simple ignition key-actuated test,
which you can use prior to going to the test station. To
check if your vehicle’s OBD II system is ready, you must
do the following:
1. Insert your ignition key into the ignition switch.
2. Turn the ignition switch to the ON position, but do not
crank or start the engine.
3. If you crank or start the engine, you will have to start
this test over.
4. As soon as you turn the ignition switch to the ON
position, you will see the MIL symbol come on as part of
a normal bulb check.
7
MAINTAINING YOUR VEHICLE 339

EMISSIONS CONTROL SYSTEM MAINTENANCE
The Scheduled Maintenance services listed inbold type
must be done at the times or mileages specified to ensure
the continued proper functioning of the emissions control
system. These and all other maintenance services in-
cluded in this manual, should be done to provide best
vehicle performance and reliability. More frequent main-
tenance may be needed for vehicles in severe operating
conditions, such as dusty areas and very short trip
driving.
Inspection and service should also be done anytime a
malfunction is suspected.
NOTE: Maintenance, replacement or repair of the emis-
sions control devices and systems on your vehicle may be
performed by any automotive repair establishment or
individual using any automotive part that has been
certified pursuant to U.S. EPA or in the State of Califor-
nia, California Air Resources Board regulations.
MAINTENANCE SCHEDULE
The oil change indicator system will remind you that it is
time to take your vehicle in for scheduled maintenance.
On Electronic Vehicle Information Center (EVIC)
equipped vehicles “Oil Change Required” will be dis-
played in the EVIC and a single chime will sound,
indicating that an oil change is necessary.
On Non-EVIC equipped vehicles “Change Oil” will flash
in the instrument cluster odometer and a single chime
will sound, indicating that an oil change is necessary.
Based on engine operation conditions the oil change
indicator message will illuminate, this means that service
is required for your vehicle. Have your vehicle serviced
as soon as possible, within the next 500 miles (805 km).
8
M A I
N T
E
N A
N CE
S
C
H E
D
U L
E
S390 MAINTENANCE SCHEDULES

Voltage............................. 147
Warning (Instrument Cluster Description) ..... 146
Loading Vehicle ...................... 302,303
Capacities ........................... 303
Tires ............................... 268
Locks Auto Unlock .......................... 31
Child Protection ........................ 32
Power Door ........................... 30
Low Tire Pressure System .................. 281
Lower Anchors and Tether for CHildren
(LATCH) .............................. 76
Lubrication, Body ....................... 350
Lumbar Support ......................... 97
Maintenance Free Battery .................. 346
Maintenance, General ..................... 341
Maintenance Procedures ................... 341
Maintenance Schedule .................... 390 Malfunction Indicator Light (Check Engine) . . 157,339
Manual, Service
......................... 413
Map/Reading Lights ..................... 111
Master Cylinder (Brakes) .................. 360
Methanol ............................. 291
Mini-Trip Computer ...................... 162
Mirrors ................................ 89
Automatic Dimming ..................... 90
Electric Powered ....................... 90
Outside .............................. 92
Rearview ............................. 89
Vanity ............................... 93
Modifications/Alterations, Vehicle ............. 7
Monitor, Tire Pressure System ............... 281
Mopar Parts ......................... 340,412
MTBE/ETBE ........................... 291
New Vehicle Break-In Period ................ 81
428 INDEX

Transmitter Battery Service
(Remote Keyless Entry).................... 25
Transmitter, Garage Door Opener
(HomeLink) ........................... 120
Transmitter Programming
(Remote Keyless Entry) .................... 25
Transporting Pets ........................ 81
Tread Wear Indicators .................... 277
Trip Odometer .......................... 150
Trip Odometer Reset Button ................ 153
Trunk Lid (Deck Lid) ...................... 37
Trunk Release, Emergency ................37,38
Trunk Release Remote Control ............... 37
Turn Signals ...................... 108,154,381
uconnect (Hands-Free Phone) ............... 93
Understanding Your Instrument Panel ......... 144
Uniform Tire Quality Grades ................ 415
Universal Transmitter ..................... 120 Unleaded Gasoline
....................... 290
Untwisting Procedure, Seat Belt .............. 46
Upholstery Care ........................ 368
Vanity Mirrors ........................... 93
Variance, Compass ....................... 165
Vehicle Certification Label ................. 302
Vehicle Identification Number (VIN) ............ 6
Vehicle Loading ................... 268,302,303
Vehicle Modifications/Alterations .............. 7
Vehicle Storage ....................... 228,376
Vehicle Theft Alarm (Security Alarm) .......... 18
Video Entertainment System™
(Rear Seat Video System) .................. 213
Viscosity, Engine Oil ...................... 344
Voice Recognition System (VR) ............... 93
Warning Lights
(Instrument Cluster Description) ............. 146
10
INDEX 435