ECO mode Citroen BERLINGO FIRST DAG RHD 2009 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009, Model line: BERLINGO FIRST DAG RHD, Model: Citroen BERLINGO FIRST DAG RHD 2009 1.GPages: 123, PDF Size: 2.8 MB
Page 24 of 123
27AUDIO EQUIPMENT-
Button
Function
A
Radio on/off.
B - Decrease volume.
C + Increase volume.
D RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
E TA T r a f fi c i n f o r m a t i o n p r i o r i t y o n / o f f .
Press for more than 2 seconds: PTY function on/off.
H
Selection of bass, treble, loudness,
sound distribution and automatic volume correction.
I
Increase the setting of the functions associated with butto
n H .
J
Decrease the setting of the functions associated with butto
n H .
L
Manual and automatic search of higher frequency.
Selection of next CD track and PTY (radio).
M MAN Manual/automatic operation of buttons
L and N .
N
Manual and automatic search of lower frequency.
Selection of previous CD track and PTY (radio).
Q CD Selection of CD.
P r e s s f o r m o r e t h a n 2 s e c o n d s : s h u f fl e .
R Radio Selection of radio. Selection of FM1, FM2, FMast and AM waveba
nds.
Press for more than 2 seconds: automatic storing of stations in memo ry (autostore).
S
Ejection of CD.
1 to 6
12 34 56 Selection of station stored in memory.
Press for more than 2 seconds: storing of a station in memory.
Page 25 of 123
AUDIO EQUIPMENT28 - GENERAL
FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically emphasises
bass and treble tones. Press button I or
J to switch the function on or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can operate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
v e h i c l e . I t w o u l d n o t f u n c t i o n i f fi t t e d
to another vehicle.
The anti-theft system is automatic
and requires no action on your
part.
ADJUSTING THE VOLUME Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button I or J to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum treble
setting.
Press button
H several
times in succession
to access the bass
(BASS) , treble (TREB) ,
loudness (LOUD) ,
fader (FAD) , balance
(BAL) and automatic
volume correction.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button H
a f t e r c o n fi g u r a t i o n o f t h e a u t o m a t i c
volume correction.
Note: bass and treble settings are
s p e c i fi c t o e a c h s o u r c e . I t i s p o s s i b l e t o
set them differently for radio, cassette
(RB3) , CD (RD3) and CD changer. When
"BASS" is dis-
played, press button
I or J to vary the set-
ting.
- "BASS -9" for a
minimum bass
setting,
- "BASS 0" for a normal setting,
- "BASS +9" for a maximum bass
setting.
Press button C to in-
crease the volume, or
button B to decrease it.
Continuous pressure
on buttons C and B al-
lows a gradual adjust-
ment of the volume.
Page 29 of 123
31AUDIO EQUIPMENT-
RDS T r a f fi c i n f o r m a t i o n p r o g r a m m e
Regional following mode (REG)
RDS station following
The display indicates the name of the
station selected. The radio is conti-
nually searching for the station which
has the best reception and which is
transmitting the same programme. Press the
"TA" button
to switch the function
on or off.
B r i e fl y p r e s s t h e
"RDS" button to
switch the function on
or off.
The multi-function display will show:
- "RDS" if the function is selected.
- "(RDS)" if the function is selected
but not available. When they are part
of a network, certain
stations broadcast re-
gional programmes in
the various areas they serve. With re-
gional following mode you can keep
listening to the same programme.
Press the "RDS" button for more
than two seconds to switch the REG
function on or off.
Using the RDS (Radio Data
System) function on FM
Radio Data System allows you to
continue listening to the same sta-
tion, whatever frequency it is using
for the region you are going through.
N o t e : t h e v o l u m e o f t r a f fi c i n f o r -
mation announcements is indepen-
dent of the volume of normal radio
listening. You can adjust it using
the volume button. The setting will
be stored and will be used when
the next messages are broadcast.
The multi-function display will show:
-
"TA" if the function is selected,
- "(TA)" if the function is selected
but not available.
A n y t r a f fi c i n f o r m a t i o n fl a s h w i l l b e
given priority, whatever source you
are listening to (radio, cassette, CD
or CD changer).
If you wish to interrupt a message,
press the "TA" button; this switches
the function off.
Page 30 of 123
AUDIO EQUIPMENT32 - EON system
This connects stations which are part
of the same network. It enables the
b r o a d c a s t o f t r a f fi c i n f o r m a t i o n , b y a
station that is part of the same net-
work as the station to which you are
listening.
This service is available when you
have selected the TA t r a f fi c i n f o r m a -
tion programme or the PTY function.
PTY function
This allows you to listen to stations
b r o a d c a s t i n g a s p e c i fi c t y p e o f p r o -
gramme (news, culture, sport, rock,
etc.).
To search for a
PTY programme:
With FM selected,
press the "TA" but-
ton for more than two
seconds to switch this
function on or off. - select the
PTY function,
- b r i e fl y p r e s s b u t t o n L or N to
scroll down the list of the various
types of programmes offered.
- when the programme of your choice is displayed, keep button L
or N pressed for more than two
seconds to carry out an automatic
search (after an automatic search
the PTY function is switched off).
In PTY mode the different types of
programmes can be stored in the
memory. To do this, press the prese-
lection buttons "1" to "6" for more
t h a n t w o s e c o n d s . B r i e fl y p r e s s t h e
corresponding button to recall the
type of programme stored in the
memory.
Page 31 of 123
33AUDIO EQUIPMENT-
Ejection of a disc S h u f fl e
When the CD player is selected, keep
button
Q pressed for two seconds.
The tracks will be played in random
sequence. Pressing the button again
for two seconds returns you to normal
play.
S h u f fl e m o d e i s d e - a c t i v a t e d e a c h
time the audio system is switched off.
After insertion of a
disc, printed face
upwards, the player
starts automatically.
If a disc is already inserted, press
button Q .
COMPACT DISC
The use of copied compact
discs may cause faults.
Insert circular compact discs
only.
Selecting a track
Press button
L to select the next
track.
Press button N to return to the start
of the current track or to select the
previous track.
Press button S to
eject the disc from the
player. Accelerated play
Keep button
L or N pressed for
forwards or backwards accelerated
play.
Accelerated play stops as soon as
the button is released.
Selecting CD mode
Page 52 of 123
53SEATS-
The driver must ensure that
the passengers use the seat
belts correctly and that they
are all properly restrained
before setting off.
Wherever you are seated in the ve-
hicle, always fasten your seat belt,
even for short journeys.
Do not invert the seat belt buckles as
t h e y w i l l n o t f u l fi l t h e i r r o l e f u l l y .
If the seats have armrests * , the lap
part of the seat belt must always
pass under the armrest.
T h e s e a t b e l t s a r e fi t t e d w i t h a n i n -
ertia reel permitting automatic adjust-
ment of the length of the strap to your
size. The seat belt is stored automat-
ically when not in use.
Before and after use, ensure that the
seat belt is reeled in correctly.
The lower part of the strap must be
positioned as low as possible on the
pelvis.
The upper part must be positioned in
the hollow of the shoulder.
T h e i n e r t i a r e e l s a r e fi t t e d w i t h a n a u -
tomatic locking device which comes
into operation in the event of a colli-
sion, on emergency braking or if the
vehicle rolls over. You can release
the device by pulling rapidly on the
strap and releasing it. In order to be effective, a seat belt:
- must be tightened as close to the
body as possible,
- must restrain one adult only,
- must not bear any trace of cuts or fraying,
- must be pulled in front of you with a smooth movement, checking
that it does not twist,
- must not be transformed or modi- fi e d t o a v o i d a l t e r i n g i t s p e r f o r m -
ance.
In accordance with current safety
regulations, all repairs and checks
must be carried out by a CITROËN
dealer who guarantees that the work
is carried out correctly.
Have your seat belts checked regu-
larly by a CITROËN dealer and par-
ticularly if the straps show signs of
damage.
Clean the seat belt straps with soapy
water or a textile cleaning product,
sold by CITROËN dealers.
* According to model.
Recommendations for children:
- use a suitable child seat if the pas-
senger is less than 12 years old or
s h o r t e r t h a n o n e m e t r e fi f t y ,
- do not use the strap-guide * when a child seat is installed.
- never use the same seat belt to secure more than one person,
- never allow a child to travel on your lap.
Depending on the nature and se-
riousness of the impacts , the pre-
tensioning device may be triggered
before and independently of the air
bags. Triggering of the pre-tensioners
is accompanied by a slight emission
of harmless smoke and a noise, due
to the activation of the pyrotechnic
cartridge incorporated in the system.
In all cases, the air bag warning lamp
comes on.
Following an impact, have the seat
belts system checked, and if neces-
sary replaced, by a CITROËN dealer.
After folding or moving a
seat or rear bench seat,
ensure that the seat belt
is positioned and rolled up
correctly.
Page 102 of 123
PRACTICAL INFORMATION98 -
ECONOMY MODE FUNCTION
After the engine has stopped, with
the key in the "accessories" position,
c e r t a i n f u n c t i o n s ( w i n d s c r e e n w i p e r ,
e l e c t r i c w i n d o w s , c o u r t e s y l i g h t s ,
a u d i o e q u i p m e n t , e t c . ) c a n o n l y b e
u s e d f o r a c o m b i n e d d u r a t i o n o f a p -
p r o x i m a t e l y t h i r t y m i n u t e s , t o p r e v e n t
discharging the battery.
O n c e t h e t h i r t y m i n u t e s a r e o v e r , a
switching to economy mode mes-
s a g e a p p e a r s o n t h e m u l t i - f u n c t i o n
d i s p l a y a n d t h e a c t i v e f u n c t i o n s a r e
p u t o n s t a n d b y .
T h e s e f u n c t i o n s a r e r e a c t i v a t e d a u -
t o m a t i c a l l y n e x t t i m e t h e v e h i c l e i s
driven.
I n o r d e r t o r e s u m e t h e u s e o f t h e s e
f u n c t i o n s i m m e d i a t e l y , t h e e n g i n e
m u s t b e s t a r t e d a n d l e f t t o r u n f o r a
f e w m i n u t e s .
T h e t i m e a v a i l a b l e t o y o u w i l l t h e n b e
d o u b l e t h e d u r a t i o n f o r w h i c h t h e e n -
g i n e i s l e f t r u n n i n g . H o w e v e r , t h i s p e -
r i o d w i l l a l w a y s b e b e t w e e n fi v e a n d
t h i r t y m i n u t e s .
BATTERY
I t i s a d v i s a b l e t o d i s c o n n e c t t h e
b a t t e r y i f t h e v e h i c l e i s n o t t o b e
u s e d f o r a p e r i o d o f m o r e t h a n
o n e m o n t h .
Before disconnecting the bat-
t e r y , y o u m u s t w a i t 2 m i n u t e s
after switching off the igni-
tion.
Never disconnect a terminal when
t h e e n g i n e i s r u n n i n g .
N e v e r c h a r g e a b a t t e r y w i t h o u t fi r s t
disconnecting the terminals.
Close the windows and the roof be-
fore disconnecting the battery.
After every reconnection of the bat-
tery, switch on the ignition and wait
1 m i n u t e b e f o r e s t a r t i n g t o a l l o w t h e
electronic systems to be initialised. If
s l i g h t d i f fi c u l t i e s a r e e x p e r i e n c e d a f -
ter this, please contact a CITROËN
dealer. A fl a t b a t t e r y p r e v e n t s t h e
engine from starting.
T o s t a r t t h e v e h i c l e f r o m
a n o t h e r b a t t e r y :
- Connect the red cable to the posi-
tive (+) terminals of the two bat-
teries,
- Connect one end of the green or black cable to the negative (-) ter-
minal of the slave battery,
- Connect the other end of the green or black cable to an earth
point on the broken down vehicle
as far as possible from the bat-
t e r y ( f o r e x a m p l e , r i g h t - h a n d e n -
g i n e m o u n t i n g ) .
O p e r a t e t h e s t a r t e r , l e t t h e e n g i n e r u n .
W a i t f o r t h e e n g i n e t o r e t u r n t o i d l e ,
then disconnect the cables.
T o c h a r g e t h e b a t t e r y u s i n g a
b a t t e r y c h a r g e r :
- Disconnect the battery,
- F o l l o w t h e i n s t r u c t i o n s f o r u s e
given by the battery charger man-
u f a c t u r e r ,
- Reconnect starting with the nega- tive (-) terminal,
- Check that the terminals and connectors are clean. If they are
c o v e r e d w i t h s u l p h a t e ( w h i t e o r
greenish deposit), disconnect
them and clean them.
Page 107 of 123
103PRACTICAL INFORMATION-
ACCESSORIES
These accessories and parts, hav-
ing been tested and approved for
reliability and safety, are all adapted
t o y o u r v e h i c l e . A w i d e r a n g e o f r e c -
ommended accessories and original
parts is offered. T h e fi t t i n g o f e l e c t r i c a l e q u i p -
ment or accessories which
are not recommended by
A u t o m o b i l e s C I T R O Ë N m a y
r e s u l t i n t h e f a i l u r e o f y o u r v e h i c l e ' s
electronic system. Please note this
s p e c i fi c w a r n i n g . Y o u a r e a d v i s e d
to contact a representative of the
M a r q u e t o b e s h o w n t h e r a n g e o f
r e c o m m e n d e d e q u i p m e n t a n d a c -
cessories.
D e p e n d i n g o n t h e c o u n t r y i n w h i c h
the vehicle is sold or operated, it is
c o m p u l s o r y t o h a v e a h i g h v i s i b i l i t y
s a f e t y j a c k e t , w a r n i n g t r i a n g l e a n d
r e p l a c e m e n t b u l b s a v a i l a b l e i n t h e
vehicle.
S c r e e n w a s h , i n t e r i o r a n d e x t e r i o r
c l e a n i n g a n d m a i n t e n a n c e p r o d u c t s ,
r e p l a c e m e n t b u l b s , . . .
Anti-theft alarm, window engraving,
fi r s t a i d k i t , h i g h v i s i b i l i t y s a f e t y j a c k -
et, rear parking assistance, warning
triangle, ...
A u d i o e q u i p m e n t , h a n d s - f r e e k i t ,
speakers, CD changer, navigation, ...
R e g a r d l e s s o f t h e a u d i o a n d t e l e m a t -
i c e q u i p m e n t o f f e r e d o n t h e m a r k e t ,
the technical constraints linked with
t h e fi t t i n g o f e q u i p m e n t o f t h e s e f a m i -
l i e s o f p r o d u c t s m e a n t h a t t h e s p e -
c i a l f e a t u r e s o f t h e e q u i p m e n t a n d
its compatibility with the capacities
o f t h e y o u r v e h i c l e ' s s t a n d a r d e q u i p -
m e n t m u s t b e t a k e n i n t o a c c o u n t .
Please contact a CITROËN dealer
f o r i n f o r m a t i o n b e f o r e fi t t i n g s u c h
e q u i p m e n t . F r o n t m u d fl a p s , r e a r m u d fl a p s ,
15/17 inch alloy wheels, wheelarch
trim, leather steering wheel, ...
R a n g e o f p r o f e s s i o n a l e q u i p m e n t
Load retainers (all models).
Loading roller.
T o w b a r , t o w b a r h a r n e s s : t r a i l e r
t o w b a r w h i c h m u s t b e fi t t e d b y t h e
CITROËN network. Separation partitions and grilles,
smooth, non-slip wooden protective
fl o o r .
Protective grilles. I n s t a l l a t i o n o f
r a d i o c o m m u n i c a t i o n t r a n s m i t t e r s
Before installing accessory radio-
c o m m u n i c a t i o n t r a n s m i t t e r s w i t h a n
e x t e r n a l a e r i a l o n y o u r v e h i c l e , y o u
are advised to contact a representa-
t i v e o f t h e C I T R O Ë N m a r q u e .
The CITROËN Network will inform
y o u o f t h e s p e c i fi c a t i o n s ( f r e q u e n c y
b a n d , m a x i m u m o u t p u t p o w e r , a e r i a l
p o s i t i o n , s p e c i fi c i n s t a l l a t i o n c o n d i -
tions) of the transmitters which can be
fi t t e d , i n a c c o r d a n c e w i t h t h e M o t o r
Vehicle Electromagnetic Compatibility
D i r e c t i v e ( 2 0 0 4 / 1 0 4 / C E ) .
R a n g e o f c o m f o r t , l e i s u r e a n d
m a i n t e n a n c e e q u i p m e n t Front seat covers compatible with
a i r b a g s , b e n c h , r u b b e r m a t s , c a r -
pet mats, snow chains, blind, tailgate
b i c y c l e c a r r i e r , r o o f b a r s ( m a x l o a d
1 2 0 k g ) , t r a n s v e r s e r o o f b a r s ( m a x
load 100 kg), ...
To prevent the mat from becoming
c a u g h t u n d e r t h e p e d a l s :
- e n s u r e t h a t t h e m a t a n d i t s fi x i n g s
are positioned correctly,
-
n e v e r fi t o n e m a t o n t o p o f a n o t h e r .