audio Citroen BERLINGO MULTISPACE 2015 2.G Repair Manual

251
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
Telephone
connection
Secondary page Bluetooth
Connection Search
Start the search for another peripheral device to
connect.
Connect /Disconnect Start or stop the Bluetooth connection to the
selected
 pe

ripheral
 d
evice.
Update Import
  the   contacts   from   the   selected   telephone  
t

o   store   them   in   the   audio   system.
Delete Delete
  the   selected   telephone.
Confirm Save
  the   settings.
Telephone
conn ection
Secondary page Search
for devices Devices detected
Telephone
Start
  the   search   for   peripheral   devices.
Audio
 s

treaming
Internet
Telephone
connection
Secondary page
Telephone options Put on hold
Cut
  the   microphone   temporarily   so   that   the  
c

ontact cannot hear your conversation with a
passenger.
Update Import
  the   contacts   from   the   selected   telephone  
t

o   save   then   in   the   audio   system.
Ringtones Choose
  the   telephone   ringtone   and   volume.
Memory info. Contact records used and free, percentage of
storage space used by internal contacts and
Bluetooth
 c

ontacts.
Confirm Save
  the   settings.
audio and Telematics
TECHnoLoGY on BoaRd
10

252
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Pairing a Bluetooth®
telephone
For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
the
  Bluetooth   mobile   telephone   to   the  
h

ands-free   system   of   the   audio   system  
m

ust   be   carried   out   with   the   vehicle
stationary .
Procedure (short) from the
telephone
In the Bluetooth menu of your device, select the s
ystem   name   in   the   list   of   devices   detected.
Enter a code of at least 4 figures in the device
and
  confirm. Enter
  this   same   code   in   the   system,  
s

elect "OK"
  and   confirm.
Procedure from the system
activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).Press on Telephone to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth connection ".
Select Search .
The list of telephones detected is
displayed.
If the telephone is not detected, it is
recommended   that   you   switch   the   Bluetooth f

unction   on   your   telephone   off   and   then   on   again.
Select the name of the desired   peripheral   from   the  
l

ist and " Confirm ".
Enter a code of at least 4 figures for
the connection then " Confirm".
Enter
 
this
 
same
 
code   in   the   telephone   then  
a

ccept
 
the
 
connection.
The
 
system
 
offers
 
to   connect   the   telephone:
-

i

n " Telephone "
 
(hands-free   kit,   telephone  
o

nly),
-

i

n " Audio streaming "
  (streaming:   wireless  
p

laying
 
of
 
audio
  files   from   the   telephone),
-

i

n " Internet " (internet browsing, only if your
telephone
 
is
 
compatible   with   the   "DUN"  
D

ial-Up
 
Networking   Bluetooth   standard).
Select
 
one
 
or
 
more
 
profiles   and   confirm.
audio and Telematics

253
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
The services available depend on
the  network,   the   SIM   card   and   the  
c

ompatibility   of   the   Bluetooth   telephone  
u

sed.   Check   the   telephone   manual   and  
w

ith   your   network   provider   for   details   of  
t

he   services   available   to   you.
The
  ability   of   the   system   to   connect  
w

ith only one profile depends on the
telephone.
  The   two   profiles   may   both  
c

onnect   by   default.
Visit
 
www.citroen.co.uk   for   more   information  
(

compatibility,   additional   help,   ...).
The recognised telephone
appears
  in   the   list.
Depending
  on   your   telephone,   you   may   be  
a

sked
  to   accept   automatic   connection   every  
t

ime
 
the   ignition   is   switched   on.
on r
eturn to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically
  and   within   around   30   seconds  
a

fter switching on the ignition the pairing is
done without any action on your part, with
(Bluetooth
 a

ctivated).
To
  modify   the   automatic   connection   mode,  
s

elect the telephone in the list then select the
desired
 p

rofile.depending on the type of telephone,
the   system   will   ask   you   to   accept   or   not  
t

he   transfer   of   your   contacts.
If not, select " Update".
Connecting a Bluetooth®
peripheral device
Automatic reconnection
on switching on the ignition, the telephone
connected when the ignition was last switched
off
  is   automatically   reconnected,   if   this  
c

onnection   mode   had   been   activated   during   the  
pa

iring
 p
rocedure.
The
  connection   is   confirmed   by   the   display   of   a  
m

essage   and   the   name   of   the   telephone.
Manual connection
Press on Telephone to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripherals.
Select
 
the   peripheral   to   connect.
Press on " Search".
The
 
connection   is   confirmed   by   the   display   of   a  
m

essage
 
and   the   name   of   the   telephone.
audio and Telematics
TECHnoLoGY on BoaRd
10

254
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Managing paired
telephones
This function allows the connection or
disconnection of a peripheral device as
well  as   the   deletion   of   a   pairing. Using the telephone is not
recommended
  while   driving.
Park
  the   vehicle.
Make
  the   call   using   the   steering  
m

ounted   controls.
Press on Telephone
to display the
primary
 pag

e.
Press
  on   the   secondary   page.
Select " Bluetooth " to display the list
of
  paired   peripheral   devices.
Select
  the   peripheral   in   the   list.
Select " Search for devices "
o

r "Connect / Disconnect " to start or
end the Bluetooth connection with
the
  selected   device.
o

r "Delete "
  to   delete   the   pairing.
Receiving a call
An incoming call is announced by a ring and a superimposed   display   in   the   screen.
Make
  a   short   press   on   the   steering  
m

ounted   TEL button to accept an
incoming
 c

all.
Make
  a   long   press
on
  the   steering   mounted   TEL button
to
  reject   the   call.
o

r Select "End call".
Making a call
Calling a new number
Press on Telephone to display the
primary pag e.
Enter
  the   phone   number   using   the  
d

igital
 k
eypad.
Press " Call"
  to   start   the   call.
Calling a contact
Press on Telephone to display the
primary pag e.
Or
  make   a   long   press
on
  the   steering   mounted   TEL
 
button.
audio and Telematics

255
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Select "Contacts ".
Select
 
the   desired   contact   from   the   list   offered.
Select " Call".
Calling a recently used number
Press on Telephone to display the
primary pag e.
Select " Call log ".
Select
 
the   desired   contact   from   the   list   offered.
It
 
is
  always   possible   to   make   a   call  
d

irectly   from   the   telephone;   park   the  
v

ehicle   first   as   a   safety   measure.
Managing contacts / entries
Press on Telephone to display the
primary pag e.
Select " Contacts ".
Select " Add contact ".
Select " Create"
 

to
 
add
 
a
 
new
 
contact.
o

r "Modify "
  to   edit   the   selected   contact.
o

r "Delete " to delete the selected
contact.
o

r "Delete all "
  to   delete   all   information  
f

or   the   selected   contact. Select "
Directory information "
for   the   number   of   entries   used,  
a

vailable, ...
audio and Telematics
TECHnoLoGY on BoaRd
10

256
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
The table below gives answers to the most frequently asked questions on your audio system.
Q UESTION ANSWER SOLUTION
The route calculation is
not
  successful. The
  navigation   settings   may   conflict   with   the   current   location  
(

exclusion   of   toll   roads   on   a   toll   motor way).Check
  the   settings   in   the   "Navigation"   menu.
The
  POIs   do   not   appear. The   POIs   have   not   been   selected.Select
  the   POIs   in   the   list   of   POIs.
The Hazard zone audible
warning
  does   not   work.The
  audible   warning   is   not   active.
ac
tivate audible warnings in the "
na
vigation"
menu.
The
  system   does   not  
s

uggest a detour around
an
  incident   on   the   route.The
  guidance   criteria   do   not   take   account   of   TMC   messages.Select the "Traffic info" function in the list of
guidance
 c

riteria.
I receive a
a
c
cident-prone
area alert which is not on
my
  route. Other
  than   guidance,   the   system   announces   all   Hazard   zone  
p

ositioned   in   a   cone   located   in   front   of   the   vehicle.   It   may   provide  
a

n   alert   for   a   Hazard   zone   located   on   nearby   or   parallel   roads.Zoom
  in   on   the   map   to   view   the   exact   position   of  
t

he   Accident-prone   area.   Select   "On   the   route"   to  
n

o longer receive alerts other than guidance or to
reduce
  the   time   for   the   announcement.
Frequently asked questions
Navigation
audio and Telematics

 257
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
QUESTIONANSWER SOLUTION
Certain
  traffic   jams   along  
t

he route are not indicated
in
 
real
 
time. On
  starting,   it   is   several   minutes   before   the   system   begins   to  
r

eceive   the   traffic   information. Wait
  until   the   traffic   information   is   being   received  
c

orrectly   (display   of   the   traffic   information   icons  
o

n   the   map).
The
  filters   are   too   restrictive. Modify
  the   "Geographic   filter"   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The altitude is not
displayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait
  until   the   system   has   completed   starting  
u

p, so that there is GPS coverage of at least
4 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s dependent on the GPS signal reception
conditions.
audio and Telematics
TECHnoLoGY on BoaRd
10

258
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Radio
QUESTIONANSWER SOLUTION
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The
  vehicle   is   too   far   from   the   transmitter   used   by   the   station  
l

istened   to   or   there   is   no   transmitter   in   the   geographical   area  
t

hrough   which   the   vehicle   is   travelling.Activate
  the   "RDS"   function   by   means   of   the  
s

hort-cut   menu   to   enable   the   system   to   check  
w

hether   there   is   a   more   power ful   transmitter   in  
t

he   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not  
i

ndicate   a   fault   with   the   audio   system.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
t

hrough   a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I
 
cannot   find   some   radio  
s

tations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list.
Some
  radio   stations   send   other   information   in   place   of   their   name  
(

the   title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The
 
name   of   the   radio  
s

tation
 c
hanges.
audio and Telematics

 259
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Media
QUESTIONANSWER SOLUTION
Playback   of   my   USB  
m

emory   stick   starts   only  
a

fter a very long wait
(around
  2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd   limit   the   number   of   sub-folders   in   the   file  
s

tructure   on   the   memory   stick.
When
 
I

 
c
onnect  
m
y  
i
Phone  
a

s telephone and to the
USB
 
port   at   the   same  
t

ime,
 
I
 
am   unable   to   play  
t

he
 
music   files. When
  the   iPhone   connects   automatically   as   a   telephone,   it   forces  
t

he   streaming   function.   The   streaming   function   takes   the   place  
o

f the USB function which is then not useable, there is a period
without
  sound   of   the   track   being   played   with   Apple
® players.
di
sconnect and reconnect to the USB port
(the USB   function   takes   priority   over   streaming).
Some
 
characters
 
in
 
the
 
m

edia
 
information
 
are
 
not
 
d

isplayed correctly while
playing. The
 
audio
 
system
 
does
 
not
 
display
 
some
 
types
 
of
 
characters. Use   standard   characters   to   name   tracks   and  
f

olders.
Playing
 
of
 
streaming
 
files
 
d

oes
 
not
 
start. The
 
peripheral
 
device
 
connected
 
does
 
not
 
support
 
automatic   play. Start   the   playback   from   the   device.
The
 
names
 
of
 
tracks
 
and
 
t

he
 
track
 
length
 
are
 
not
 
d

isplayed on the screen
when
 s

treaming
 a

udio. The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer
 
of
 
this   information.
audio and Telematics
TECHnoLoGY on BoaRd
10

260
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
QUESTIONANSWER SOLUTION
In changing the setting
of treble and bass the
equalizer setting is
deselected. The
  selection   of   an   equalizer   setting   imposes   the   balance   settings.
Modifying
  one   without   the   other   is   not   possible.Modify the balance or equalizer settings to obtain
the
  desired   musical   ambience.
In changing the equalizer
setting, treble and bass
return
 
to   zero.
When changing the
balance settings, the
distribution setting is
deselected. The
  selection   of   a   distribution   setting   imposes   the   balance   settings.
Modifying
  one   without   the   other   is   not   possible.Modify the balance or distribution settings to
obtain
  the   desired   musical   ambience.
When changing a sound
distribution setting,
the balance setting is
deselected.
Settings
audio and Telematics