ignition Citroen BERLINGO MULTISPACE 2016 2.G Owner's Guide

111
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
Adjusting electric door mirrors
- Move the control to the right or to
the left to select the corresponding
mirror.
-

Move the control in all four
directions

  to   adjust.
-

Return the control to the central
position.
MIRRORS
Heated mirrors
Adjusting manual door mirrors
Forced folding
If the mirror casing has come out of its initial location, with the vehicle
stationary  reposition   the   mirror   casing  
manually

  or   use   the   electric   folding  
control.Press the heated rear screen
button.
Move the lever in all four directions to
adjust.
When

 
the
 
vehicle
 
is
 
parked,
 
the
 
door
 
mirrors

 
can
 
be
 
folded
 
back
 
manually.
The
 
mirrors
 
are
 
not
 
equipped
 
with
 
automatic

 
heating.
Electric folding / unfolding
The mirrors can be folded or unfolded electrically
  from   the   inside,   with   the  
vehicle

  parked   and   the   ignition   on:
-

Place the control in the central
position.
-

 
T
urn   the   control   downwards. The
  mirrors   that   have   electric   folding/
unfolding   can   be   heated.
EaSE oF USE and CoMFoRT
4
Mirrors and windows

11 3
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2016
ELECTRIC WINDOWS
Lower the window fully, then raise it, it
will  rise   in   steps   of   a   few   centimetres  
each

  time   the   control   is   pressed.  
Repeat the operation until the window
is

  fully   closed.
Continue to press the control for at
least one second after the window
closed
  position   has   been   reached.
The safety anti-pinch does not operate
during
  these   operations.
Safety anti-pinch
When the window rises and meets an obstacle,  it   stops   and   partially   lowers.
Manual mode
This mode is available depending  on   equipment;   it   is  
identified

  by   this   symbol   on   the  
control

  in   question.
Good practice
If the electric windows meet an obstacle  during   operation,   you   must  
reverse

  the   movement   of   the   window.  
T

o  
do
 
this,
 
press
 
the
 
control
 
concerned.
When the driver operates the
passenger electric window controls,
they

  must   ensure   that   no   one   is  
preventing correct closing of the
windows.
The

  driver   must   ensure   that   the  
passengers use the electric windows
correctly

.
Be aware of children when operating
the
  windows.
Following
  several   consecutive   closing/
opening operations of the electric
window
  control,   a   protection   system  
is triggered which only allows closing
of

  the   window.  
After
  closing,   wait  
approximately

  40   minutes.   Once   this  
time

  has   elapsed,   the   control   becomes  
operational

  again.
1.
d
river's side
2.

Passenger's side
Reinitialisation
Following reconnection of the battery,
or   in   the   event   of   a   malfunction,   the  
safety

  anti-pinch   function   must   be  
reinitialised. The electrical functions of the electric
windows
  are   deactivated:
-  
approximately
  45   seconds   after   the  
ignition is switched of

f,
-
after one of the front doors is
opened,

  if   the   ignition   is   off.
There
 
are
 
two
 
operating
 
modes:
Press or pull the control, without
passing
 
the
 
point
 
of
 
resistance.
The window stops when you release
the
 
control.
One-touch mode
Press or pull the control, beyond the
point
  of   resistance.
The window opens or closes fully when
the
  control   is   released.
Pressing or pulling the control again
stops
  the   movement   of   the   window.
EaSE oF USE and CoMFoRT
4
Mirrors and windows

11 4
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
HAZARD WARNING LAMPS
H
ORN
Press the centre of the steering wheel.
PARKING BRAKE
Applying
Pull the parking brake lever up to immobilise
  your   vehicle.
Check
  that   the   parking   brake   is   applied  
firmly

  before   leaving   the   vehicle.Pull
  on   the   parking   brake   lever,   only
with the vehicle stationary.
In the exceptional case of use of the
parking
  brake   when   the   vehicle   is  
moving,

  apply   the   brake   by   pulling  
gently

  to   avoid   locking   the   rear   wheels  
(risk

  of   skidding).
Press this button, the direction
indicators
 
flash.
They
 
can
 
operate
 
with
 
the
 
ignition
 
off.
The
 
hazard
 
warning
 
lamps
 
should
 
only
 
be used in dangerous situations, when
stopping

 
in
 
an
 
emergency
 
or
 
when
 
driving

 
in
 
unusual
 
conditions.
When
  parking   on   a   slope,   direct   your  
wheels

  towards   the   pavement   and   pull  
the

  parking   brake   lever   up.
There is no advantage in engaging
a
  gear   after   parking   the   vehicle,  
particularly

  if   the   vehicle   is   loaded.
If the parking brake is still on or has not been released properly, this is
indicated
  by   this   warning   lamp   which
 comes

  on   in   the   instrument   panel.
Automatic operation of hazard
warning lamps
When braking in an emergency, depending on the force of deceleration,
the  hazard   warning   lamps   come  
on

  automatically.  
They
  switch   off  
automatically

  the   first   time   you  
accelerate.
It

  is   also   possible   to   switch   them   off   by  
pressing

  the   switch   on   the   dashboard.Releasing
Pull the lever up slightly and press the
button  to   lower   the   parking   brake   lever.
driving safely

121
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
different modes are available:
Normal (ESC)
ESC OFFSnow
This mode allows the vehicle to adapts its strategy to the

conditions of grip encountered
for each of the two front
wheels,
  on   moving   off.
When
 
moving,   the   system   optimises  
wheelspin to provide the best
acceleration possible for the grip
available.
Off road
(mud, wet grass, ...)
 When moving off, this mode  allows   considerable  
wheelspin on the wheel
with the least grip to favour
clearing

  of   the   mud   and  
regain

  "grip".
At
 
the
 
same   time,   the   wheel   with   the  
most

 
grip
  is   controlled   in   such   a   way   as  
to

 
transmit   as   much   torque   as   possible.
When
 
moving,   the   system   optimises  
wheelspin

  to   meet   the   driver's  
requirements

  as   fully   as   possible.
Sand
 This mode allows a little wheelspin on the two driving
wheels  at   the   same   time   to  
allow

  the   vehicle   to   move  
forward

  and   reduces   the   risk  
of

  getting   stuck   in   the   sand.
Do
 
not
 
use   the   other   modes   on   sand  
as

 
the
 
vehicle   may   become   stuck.
This
 
mode
 
is
 
calibrated
 
for
 
a
 low
 
level
 
of
 
skidding,
 
based
 
on dif

ferent conditions of grip
encountered
 
on
 
the
 
road.
When the ignition is switched off, the
system
 
returns
 
automatically
 
to
 
DSC
 
mode.
This

 
mode
 
is
 
only
 
suitable
 
for

 
specific
 
conditions
 
encountered

 
when
 
moving
 
off
 
or

 
at
 
low
 
speed.
Above
 
30
 
mph
 
(50
 
km/h)
 
the

 
system
 
returns
 
to
 
DSC
 
mode
 
automatically

.
driving safely
SaFETY
5

122
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
ACTIVE CITY BRAKE
Active City Brake is a driving assistance
  system   that   aims   to   avoid  
a frontal collision or reduce the speed
of

  an   impact   if   the   driver   does   not  
react

  sufficiently   (inadequate   brake  
application).
This

  system   is   designed   to  
improve

  driving   safety.
It
  remains   the   driver's   responsibility   to  
continuously

  monitor   the   state   of   the  
traffic

  and   to   assess   the   distances   and  
relative

  speeds   of   other   vehicle.
Active
  City   Brake   can   in   no  
circumstances

  replace   the   need   for  
vigilance

  on   the   part   of   the   driver. Never
  look   at   the   laser   sensor  
through

  an   optical   instrument  
(magnifying

  glass,   microscope...)  
at a distance of less than
10 centimetres:

  risk   of   eye   injury.Principle
Using a laser sensor located at the top
of  the   windscreen,   this   system   detects  
a

  vehicle   running   in   the   same   direction  
or

  stationary   ahead   of   your   vehicle.
When
  necessary,   the   vehicle's   braking  
system

  is   operated   automatically  
to avoid a collision with the vehicle
ahead.Automatic

  braking   occurs   later  
than if done by the driver

, so as
to intervene only when there is a
high
  risk   of   collision.
Conditions for activation
Active City Brake only operates if the following  conditions   are   met:
●
 
ignition
  on,
●
 
the
  vehicle   is   in   a   forward   gear,
●
 
speed
  is   between   about   3   and  
18 mph

  (5   and   30   km/h),
●
 
the
  braking   assistance   systems  
(ABS,

  EBFD,   emergency   braking  
assistance) are not faulty

,
●
 
the
  trajectory   control   systems  
(

a SR, d SC) are not deactivated or
faulty,
●
 
the
  vehicle   is   not   in   a   tight   corner,
●
 
the
  system   has   not   been   triggered  
during

  the   previous   10   seconds.
driving safely

124
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
Deactivation
The system is deactivated in the vehicle  configuration   menu,   accessible  
with

  the   ignition   on.
Its
  state   is   memorised   when   the  
ignition

  is   switched   off.
When
  the   system   is   deactivated,  
a

  message   is   displayed   every  
time

  the   ignition   is   switched   on,  
to
  warn   you. With the monochrome screen C
F

Press the
MENU button for access
to
  the   main   menu.
F

Select "
Personalisation-
Configuration".
F

Select "
Define vehicle
parameters".
F

Select "
Driving assistance".
F

Select "
Automatic emergency
braking: OFF" or "Automatic
emergency braking: ON".
F

Press the "
7" or "8" button to
check
  or   uncheck   the   box   and  
activate

  or   deactivate   the   system  
respectively

.
F

Press the "
5" or "6" button, then
the OK button to select the "OK"
box
  and   confirm   or   the   Back button
to
  cancel.With the touch screen tablet
F
Press the " MENU"   button.
F Select the " Driving"   menu.
F

In the secondary page, select
"

Vehicle settings".
F

Select the "
Driving assistance"
tab.
F
 
Check
  or   uncheck   the   "Auto
emergency braking" box to
activate
  or   deactivate   the   system.
F
 
Confirm.
driving safely

 127
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
Recommendations for children:
-
use a suitable child seat if the
passenger is less than 12 years old
or

  shorter   than   one   metre   fifty,
-

never allow a child to travel on
your lap, even with the seat belt
fastened. For

  more   information   on   child  
seats, refer to the "Child safety"
section

  of   chapter   5.
Clean the seat belt straps with
soapy water or a textile cleaning
product, sold by CITR
o Ë n
dealers.
In accordance with current safety
regulations, your CITR
o Ë n dealer can
guarantee
  all   work   or   any   checks,   from  
testing

  to   maintenance,   on   your   seat  
belt

  equipment.
Have
  the   seat   belts   checked   regularly  
(even

  after   a   minor   impact)   by   a  
CITROËN

  dealer   or   a   qualified  
workshop:

  they   must   not   show   any  
signs of wear

, cutting or fraying
and
  they   must   not   be   converted   or  
modified.
The

 
force
 
limiter
 
reduces
 
the
 
pressure
 of the seat belt against the body of the
occupants.
The pretensioning seat belts are active
when
 
the
 
ignition
 
is
 
switched
 
on.
The
 
inertia
 
reels
 
are
 
fitted
 
with
 
a
 
device
 
which

 
automatically
 
locks
 
the
 
strap
 
in
 
the

 
event
 
of
 
a
 
collision
 
or
 
emergency
 
braking

 
or
 
if
 
the
 
vehicle
 
rolls
 
over.
You can unfasten the seat belt by
pressing
 
the
 
red
 
button
 
on
 
the
 
buckle.
 
Guide

 
the
 
seat
 
belt
 
after
 
unfastening.
The
 
airbag
 
warning
 
lamp
 
comes
 
on
 
if

 
the
 
pretensioners
 
are
 
deployed.
 
Contact a CITR

o
Ë
n
dealer or a
qualified
 
workshop.
In
 
order
 
to
 
be
 
effective,
 
a
 
seat
 
belt:
-
 
must

 
restrain
 
one
 
person
 
only,
-
 
must

 
not
 
be
 
twisted,
 
check
 
by
 
pullin

g in front of you with an even
movement,
-
 
must

 
be
 
tightened
 
as
 
close
 
to
 
the
 
body

 
as
 
possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as
 
possible
 
on
 
the
 
pelvis.
d

o not interchange the seat belt
buckles
 
as
 
they
 
will
 
not
 
fulfil
 
their
 
role
 
properly

.
 
If
 
the
 
seats
 
are
 
fitted
 
with
 
armrests,

 
the
 
lap
 
part
 
of
 
the
 
seat
 
belt
 
should

 
always
 
pass
 
under
 
the
 
armrest.
Check
 
that
 
the
 
seat
 
belt
 
is
 
fastened
 
correctly

 
by
 
pulling
 
the
 
strap
 
firmly.Front seat belts
The front seats are fitted with pretensioners   and   force   limiters.
Rear seat belts
(5 seat version)
The rear seats are fitted with three-
point   inertia   reel   seat   belts.
SaFETY
5
Seat belts

130
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
130
Advice
Sit  in   a   normal   upright   position.
Wear
  a   correctly   adjusted   seat   belt.
Do
 
not
 
allow
 
anything
 
to
 
come
 
between
 
the occupants and the airbags


(a
  child,   pet,   object...),   do   not   attach   or  
fix

  anything   near   to   the   airbags   or   their  
trajectories

  when   inflating   as   this   could  
cause

  injuries   when   the   airbags   are  
deployed.
Never

  modify   the   original   definition   of  
your vehicle, particularly in the area
directly

  around   the   airbags.
a

fter an accident or if the vehicle has
been
  stolen   or   broken   into,   have   the  
airbag

  systems   checked.
All
  work   on   the   airbag   system   must   be  
carried out by a CITR

o Ë n dealer or a
qualified
  workshop.
Even if all of the precautions
mentioned
  are   observed,   a   risk   of  
injury

  or   of   minor   burns   to   the   head,  
chest

  or   arms   when   an   airbag   is  
deployed

  cannot   be   ruled   out.  
The
  bag  
inflates

  almost   instantly   (within   a   few  
millis

econds)   then   deflates   within   the  
same

  time   discharging   the   hot   gas   via  
openings

  provided   for   this   purpose.Front airbags
d

o not drive holding the steering wheel
by
  its   spokes   or   resting   your   hands   on  
the

  centre   part   of   the   wheel.
Passengers
  must   not   place   their   feet  
on

  the   dashboard.
Do
  not   smoke   as   deployment   of   the  
airbags

  can   cause   burns   or   the   risk   of  
injury

  from   a   cigarette   or   pipe.
Never
  remove   or   pierce   the   steering  
wheel

  or   hit   it   violently.
Do
  not   fit   or   attach   anything   to   the  
steering wheel or dashboard, this could
cause

  injuries   with   deployment   of   the  
airbags.
Lateral airbags
Use only approved covers on the
seats,

  compatible   with   the   deployment  
the

  lateral   airbags.   For   information  
on the range of seat covers suitable
for your vehicle, you can contact a
CITROËN dealer

.
For
  more   information   on   accessories,  
refer to "

o ther accessories" in
section 6.
Do
  not   fix   or   attach   anything   to   the   seat  
backs

  (clothing...).  
This
  could   cause  
injury

  to   the   chest   or   arms   if   the   lateral  
airbag

  is   deployed.
d

o not sit with the upper part of the
body any nearer to the door than
necessary.
Airbags only operate when the
ignition is switched on.
This
 
equipment
 
only
 
operates
 
once.
 
If

 
a
 
second
 
impact
 
occurs
 
(during
 
the
 
same

 
or
 
a
 
subsequent
 
accident),
 
the
 
airbag

 
will
 
not
 
operate.
The
 
deployment

 
of

 
an

 
airbag

 
or

 
airbags

 
is

 
accompanied
 
by
 
a
 
slight
 
discharge
 
of

 
smoke
 
and
 
a
 
noise,
 
due
 
to
 
the
 
activation of the pyrotechnic cartridge
incorporated

 
in
 
the
 
system.
This
 
smoke
 
is
 
not
 
harmful,
 
but
 
sensitive

 
individuals
 
may
 
experience
 
some

 
irritation.
The
 
noise
 
of
 
the
 
detonation
 
may
 
result
 
in a slight loss of hearing for a short
time. The

 
passenger's
 
front
 
airbag
 
must
 
be deactivated if a child seat is
installed

 
rearward
 
facing.
Chapter
 
5,
 
"Child
 
safety"
 
section.
airbags

132
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
132
Front airbags
Deployment
They are deployed, except the
passenger's front airbag if it has been
deactivated, in the event of a serious
front  impact   applied   to   all   or   part   of   the  
front

  impact   zone   A in the longitudinal
centreline of the vehicle on a horizontal
plane
  directed   from   the   front   towards  
the

  rear   of   the   vehicle.
The
  front   airbag   inflates   between   the  
front occupant of the vehicle and the
dashboard to cushion their forward
movement. Deactivating the passengers front
airbag
o

nly the passenger's front airbag can
be   deactivated.
-
W
ith the ignition switched off,
insert   the   key   into   the   passenger's  front
  airbag   deactivation   switch.
- T urn it to the "OFF"   position.
-
 
Remove
  the   key   keeping   the   switch  
in

  the   new   position.
The passenger's front airbag
warning
 
lamp
 
in
 
the
 
instrument panel

  remains   on   while   the
 airbag

  is   deactivated.If
  the   two   airbag   warning   lamps  
are on continuously

, do not install
a rearward facing child seat and
contact a CITR
o Ë n dealer or a
qualified
  workshop.
Front airbag fault
To ensure the safety of your child,
it is essential to deactivate the
passenger's front airbag when you
install a rearward facing child seat on
the
  front   passenger   seat.   Otherwise,  
the

  child   would   risk   being   killed   or  
seriously

  injured   if   the   airbag   were  
deployed.Reactivation
In the

"OFF" position, the passenger's
front airbag will not be deployed in the
event   of   an   impact.
As   soon   as   the   child   seat   is   removed,  
turn the passenger's front airbag switch
to the

"ON" position to reactivate the
airbag and thus ensure the safety
of your passenger in the event of an
impact.
If   this   warning   lamp   comes  
on,

  accompanied   by   an  
audible

  signal   and   a   message  
in the screen, consult a
CITR

o Ë n dealer or a
qualified   workshop   to   have  the
  system   checked.
The
  front   airbags   are   fitted   in   the  
centre of the steering wheel for the
driver and in the dashboard for the
front

  passenger.
airbags

 147
Berlingo-2-VP_en_Chap05_Securite_ed01-2016
 147
CHILD LOCK
This prevents opening of the siding
side  doors   from   the   inside.
Manual Electric
With the ignition on, press
this
  button   in   the   middle   of  
the

  dashboard.
Indicator
  lamp   on   =   child   lock  
on.
Please

 
note:   this   system   is  
independent

  of   the   central   locking  
control.Always

  remove   the   ignition   key  
when leaving the vehicle, even for
a

 
short   time.
It
 
is
 
advisable   to   check   the   state   of  
the

 
child
 
lock   each   time   the   ignition   is  
switched

  on.
In
 
the
 
event   of   a   serious   impact   the  
electric

 
child   lock   is   deactivated  
automatically

.
a label indicates the position of the
lever

 
and
 
the
 
state
 
of
 
the
 
child
 
lock.
-
o
pen fully past the point of
resistance.
-

T

ilt the lever, located on the rear
section
 
of
 
the
 
door.
SaFETY
5
Child safety