steering wheel Citroen BERLINGO MULTISPACE RHD 2014.5 2.G Owner's Guide

Berlingo_2_VP_en_Chap08_aide-rapide_ed02-2014
178
Without lifting (4 wheels on the
road)
You should always use a towing bar.
BEInG tOWEd
Ths procedure involves the use of the
towing eye supplied with the tools for
changing
  a   wheel.
From the front
- Unclip the cover by pressing the
bottom  part.
-
 
Fully
  screw   in   the   removable   towing  
eye.
From the rear
- Unclip the cover using a coin or the
flat  part   of   the   towing   eye.
-
 
Fully
  screw   in   the   removable   towing  
eye. When towing with the engine
switched

  off,   there   is   no   braking   or  
steering

  assistance.
Lifting (only 2 wheels on the
road)
It is preferable to raise the vehicle
using
  professional   lifting   equipment.
Vehicles fitted with a manual
gearbox (d iesel version)
In the case of vehicles fitted with a  manual   gearbox,   the   gear   lever  
must

  be   in   neutral,   failure   to   observe  
this

  special   condition   may   result   in  
damage

  to   transmission   and   braking  
components

  and   the   absence   of  
braking

  assistance   when   the   engine   is  
started

  again.
Chapter
 
9,
 
"Changing
 
a
 
wheel"
 
section.
Having your vehicle towed

07
10.36
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
By alphabetical list
Press r A d IO, select the station of your
choice
  and   confirm.
By automatic frequency search
Press 7 or 8
  for   the   automatic   search  
for

  a   lower   or   higher   radio   frequency.
Or
  turn   the   thumb   wheel   at   the   steering  
mounted

  controls.
By manual frequency search
Press 5 or 6
  to   adjust   the   radio  
frequency

  step   by   step.
Selecting a station
The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode. This phenomenon  is   a   normal   result   of   the   way   in   which   radio   waves   are   transmitted   and   does   not   in   any   way   indicate   a   fault   with   the   audio   system.
The
  quality   of   reception   is   represented   by   the   number   of  
active

  waves   in   this   symbol.
Press
r A d IO or OK to display the
contextual
  menu.
changing waveband
Select "change waveband".
Select " AM / FM"   and   confirm.
rAdIO

07
10.37
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
Press the button on the numerical keypad to recall a preset  station.
Or
  press   then   turn   the   thumb   wheel   at   the   steering  
mounted

  controls.
Presetting a station
after selecting a station, press one of the buttons
on   the   numerical   keypad   for   2   seconds   to   preset   the  
current

  station.
An
  audible   signal   confirms   that   the   station   has   been  
preset. Press

r A d IO.
Activate / d
eactivate rd S
RDS, if activated, allows you to continue listening to the same station
  by   automatic   retuning   to   alternative   frequencies.   However,  
in

  certain   conditions,   coverage   of   an   RDS   station   may   not   be  
assured throughout the entire country as radio stations do not
cover

  100   %   of   the   territory.  
This
  explains   the   loss   of   reception   of  
the

  station   during   a   journey.
Select "Guidance options " then
confirm.
a

ctivate or deactivate " rd S" then
confirm.
rAdIO