display Citroen BERLINGO MULTISPACE RHD 2017 2.G Repair Manual

 257
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
QUESTIONANSWER SOLUTION
Certain
  traffic   jams   along  
t

he route are not indicated
in
 
real
 
time. On starting, it is several minutes before the system begins to receive
the
  traffic   information. Wait until the traffic information is being received
correctly (display of the traffic information icons
on
  the   map).
The
  filters   are   too   restrictive. Modify
  the   settings.
In
  certain   countries,   only   major   routes   (motor ways...)   are   listed   for  
t

he   traffic   information. This
  phenomenon   is   normal.   The   system   is  
d

ependent   on   the   traffic   information   available.
The altitude is not
displayed. On
  starting,   the   initialisation   of   the   GPS   may   take   up   to   3   minutes   to  
r

eceive   more   than   4   satellites   correctly.Wait until the system has completed starting
up, so that there is GPS coverage of at least
4 satellites.
Depending
  on   the   geographical   environment   (tunnel...)   or   the  
w

eather,   the   conditions   of   reception   of   the   GPS   signal   may   vary.This
  phenomenon   is   normal.   The   system  
i

s dependent on the GPS signal reception
conditions.
Audio and Telematics
TECHNOLOGY on BOARD
10

258
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Radio
QUESTIONANSWER SOLUTION
The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz
  is   displayed...). The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through
  which   the   vehicle   is   travelling.Activate the "RDS" function by means of the
short-cut
  menu   to   enable   the   system   to   check  
w

hether there is a more power ful transmitter in
the
  geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)  
b

lock   reception,   including   in   RDS   mode.This phenomenon is normal and does not indicate
a
  fault   with   the   audio   system.
The aerial is absent or has been damaged (for example when going
through
  a   car   wash   or   into   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
I cannot find some radio
stations in the list of
stations
 r

eceived. The
  station   is   not   received   or   its   name   has   changed   in   the   list.Press on the "Update list" function in the system
to
  update   the   list   of   stations   received.
Some radio stations send other information in place of their name
(the
  title   of   the   song   for   example).
The
  system   interprets   this   information   as   the   name   of   the   station.
The name of the radio
station
 c

hanges.
Audio and Telematics

259
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Media
QUESTIONANSWER SOLUTION
Playback   of   my   USB  
m

emory   stick   starts   only  
a

fter a very long wait
(around
  2   to   3   minutes). Some
  files   supplied   with   the   memory   stick   may   greatly   slow   down  
a

ccess   to   reading   the   memory   stick   (multiplication   by   10   of   the  
c

atalogue   time). Delete
  the   files   supplied   with   the   memory   stick  
a

nd limit the number of sub-folders in the file
structure
  on   the   memory   stick.
When I connect my iPhone
as telephone and to the
USB port at the same time,
I am unable to play the
music
 
files. When the iPhone connects automatically as a telephone, it forces
the
  streaming   function.   The   streaming   function   takes   the   place   of  
t

he USB function which is then not useable, there is a period without
sound
  of   the   track   being   played   with   Apple
® players.D isconnect and reconnect to the USB port (the
USB   function   takes   priority   over   streaming).
Some characters in the
media information are not
displayed correctly while
playing. The
 
audio
 
system
 
does
 
not
 
display
 
some
 
types   of   characters. Use   standard   characters   to   name   tracks   and  
f

olders.
Playing of streaming files
does
 
not
 
start. The
 
peripheral
 
device
 
connected
 
does
 
not
 
support   automatic   play. Start   the   playback   from   the   device.
The
 
names
 
of
 
tracks
 
and
 
t

he
 
track
 
length
 
are
 
not
 
d

isplayed on the screen
when
 s

treaming
 a

udio. The
 
Bluetooth
 
profile
 
does
 
not
 
allow
 
the
 
transfer   of   this   information.
Audio and Telematics
TECHNOLOGY on BOARD
10

262
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
QUESTIONANSWER SOLUTION
I cannot connect my
Bluetooth
 t

elephone. The telephone's Bluetooth function may be switched off or the
telephone
  may   not   be   visible. Check
  that   your   telephone's   Bluetooth   function   is  
s

witched   on.
Check
  in   the   telephone   settings   that   it   is   " Visible  
t

o   all".
The
  Bluetooth   telephone   is   not   compatible   with   the   system.You
  can   check   the   compatibility   of   your   telephone  
a

t   www.citroen.co.uk   (services).
The volume of the
telephone connected
in Bluetooth mode is
inaudible. The
  volume   depends   both   on   the   system   and   on   the   telephone.Increase the volume of the audio system, to
maximum if required, and increase the volume of
the
  telephone   if   necessary.
The ambient noise level has an influence on the quality of telephone
communication. Reduce the ambient noise level (close the
windows, reduce the booster fan speed, slow
down...).
Some contacts are
duplicated
  in   the   list. The options for synchronizing contacts are synchronizing the
contacts
  on   the   SIM   card,   the   contacts   on   the   telephone,   or   both.  
W

hen both synchronizations are selected, some contacts may be
duplicated. Select "Display SIM card contacts" or "Display
telephone
 c

ontacts".
Contacts are not shown in
alphabetical
 o

rder. Some
  telephones   offer   display   options.   Depending   on   the   settings  
c

hosen,   contacts   can   be   transferred   in   a   specific   order.Modify the display setting in the telephone
di r e c to r y.
The system does not receive
SMS
 
text   messages. The Bluetooth mode does not permit sending SMS text messages to
the
  system.
Telephone
Audio and Telematics

266
Berlingo2VP_en_Chap10b_RD45_ed02-2016
First steps
* Available according to version.
O n   /   Off,   volume   setting.
Select
 s
ource:
Radio;   USB;   AUX;   CD;   Streaming.
Display   the   list   of   local   stations.
Long  
p
ress:  
C
D  
t
racks  
o
r  
M
P3  
f
olders  
(

CD   /   USB). Select   the   screen   display   mode:
Date, audio functions, trip computer,
telephone.
Audio
 se
ttings:
Front /rear   fader,   left /right   balance,  
b

ass/treble,   loudness,   audio  
am

biences.
The DARK button changes the
screen display for improved driving
comfort   at   night.
1
st press: upper bar only illuminated.
2nd press: black screen.
3rd press: return to standard display. Sel ect next frequency
down/up.
Select   previous/next   MP3  
f o l d e r.
Select   previous/next   folder   /   genre   /  
a

rtist   /   playlist   (USB).
Abandon   the   current   operation. Confirm. Buttons 1 to 6
Select   a   pre-set   radio   station.
Long   press:   pre-set   a   station.
Automatic frequency search
down/up.
Select   previous/next   CD,   MP3   or  
U

SB   track.
Eject   CD.
Display
  main   menu. TA (Traffic Announcements)
on/of f.
Long
  press:   PT Y*   (radio   Programme  
T

Yp e).
Select
  AM   /   FM   wavebands.
Audio and Telematics

268
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Menus
Screen C
Audio functions
Radio;  CD;   USB;   AUX.
Trip computer
Enter distances; Alerts; State of
functions.
Bluetooth
®: Telephone - Audio
Pairing;
 
Hands-free   kit;   Streaming.
Personalisation-configuration
Vehicle parameters; Display;
Languages. For an overview of the menus available,
refer to the "Screen menu map"
section.
Screen A
Radio
Selecting a station
Press the SOURCE
button several
times in succession and select the
radio.
Press the BAND AST button to
select
  a   waveband.
Briefly press one of the buttons to
carry out an automatic search of the
radio
 s

tations.
Press one of the buttons to carry out
a
  manual   search   up   /   down   for   radio  
f

requencies.
Press the LIST REFRESH button to
display the list of stations received
locally
  (30   stations   maximum).
To update this list, press for more
than
  two   seconds.
Audio and Telematics

269
Berlingo2VP_en_Chap10b_RD45_ed02-2016
RDS
The external environment (hills,
buildings, tunnels, basement car
parks, ...)  may   block   reception,  
i

ncluding   in   RDS   mode.   This   is   a  
n

ormal effect of the way in which radio
waves are transmitted and does not
indicate
  any   failure   of   the   audio   system.
Press the MENU
 

button.
Select " Audio functions ".
Press OK.
Select the " FM waveband
preferences "
  function.
Press OK. Select "
Activate RDS ".
Press OK , RDS is displayed in the
screen.
In " Radio " mode, press OK
 

directly   to   activate   /  
d

eactivate   RDS   mode.
RDS, if displayed, enables you to continue
listening to the same station by automatic
retuning
  to   alternative   frequencies.
 H

owever, in certain conditions, coverage
of an RDS station may not be assured
throughout the country as radio stations
do
  not   cover   100   %   of   the   territory.   This
 e

xplains the loss of reception of a station
that
  can   occur   during   a   journey.
Receiving TA messages
Press the TA button to activate or
deactivate   traffic   messages.
The TA (Traffic Announcement)
function gives priority to TA alert
messages.
  To   operate,   this   function  
n

eeds good reception of a radio station
transmitting   this   type   of   message.  
W

hen a traffic report is transmitted, the
current   audio   source   (Radio,   CD, ...)  
i

s interrupted automatically to play the
TA
 
message.   Normal   playback   of   the  
a

udio source resumes at the end of the
transmission   of   the   message.
Audio and Telematics
TECHNOLOGY on BOARD
10

270
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Media
USB port
This unit consists of a USB port
and  an   auxiliary   Jack   socket,  
d

epending   on   model.
Insert
  a   USB   memory   stick   into   the   USB   port  
o

r connect a USB peripheral device to the USB
port
  using   a   suitable   cable   (not   supplied).
The system creates playlists
(temporary
  memory),   which   can   take  
f

rom a few seconds to several minutes
on
 
the
 
first   connection.
Reducing the number of non-music
files and the number of folders reduces
this
 
waiting   time.   Playlists   are   updated  
e

very time the ignition is switched off or
a
 
USB
 
memory   stick   is   connected.
The
 
lists   are   memorised:   if   the   lists   are  
n

ot changed, the subsequent loading
time
 
is
 
reduced. Press and hold REFRESH LIST
to
display
  the   different   classifications.
Select by " Folder"
  /   "Artist "
  /  
"G

enre"
  /  
"Pl

aylist".
Press OK to select the classification
required, then press OK again to
confirm. Press REFRESH LIST
briefly to
display the previously selected
classification.
Navigate through the list using the
left
  /  
r
ight   and   up   /   down   buttons.
Confirm the selection by pressing
OK.
Press one of these buttons to gain
access
  to   the   previous   /   next   track   in  
t

he   list.
Press and hold one of the buttons for
fast
  for ward   or   rewind.
Press one of these buttons to
gain
  access   to   the   previous   /   next  
"Fo

lder"
  /   "Artist "
  /   "Genre "
  /  
"Pl

aylist"
  in   the   list.
To protect the system, do not use a
USB
  hub.
Audio and Telematics

 271
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Auxiliary socket (AUx)
Connect the portable device (MP3 player, …) to
the  auxiliary   Jack   socket   using   an   audio   cable  
(

not
 sup
plied).Press the SOURCE button several
times in succession and select AU
x.
F

irst   adjust   the   volume   on   your   portable   device  
(

to   a   high   level).   Then   adjust   the   volume   on  
y

our   audio   system.   Operation   of   controls   is   via  
t

he   portable   device.
Do not connect a device to both the
Jack
  auxiliary   socket   and   the   USB   port  
a

t   the   same   time.
CD player
Insert circular compact discs only.
S ome anti-pirating systems, on original discs
or CDs copied using a personal recorder, may
cause faults which are no reflection on the
quality
  of   the   vehicle's   player.
Insert a CD in the player, play begins
automatically. To play a disc which has already
been inserted, press the SOURCE

button several times in succession
and select CD .
Press one of the buttons to select a
track
  on   the   CD.
Press the LIST REFRESH button to
display
  the   list   of   tracks   on   the   CD.
Press and hold one of the buttons for
fast
  for ward   or   rewind.
Audio and Telematics
TECHNOLOGY on BOARD
10

272
Berlingo2VP_en_Chap10b_RD45_ed02-2016
The audio system will only play files with the
extension  ".mp3"   with   a   sampling   rate   of
 

22.05   KHz   or   44.1   KHz.   No   other   type   of   file  
(

.wma,   .mp4,   .m3u,   etc.)   can   be   played.
It is advisable to restrict file names to
20


characters without using special characters
(e.g.
  "   ?   ;   ù)   to   avoid   any   playing   or   displaying  
pro

blems.
In order to be able to play a recorded CDR or
CDRW,
  when   recording,   the   ISO   9660   level   1.2  
o

r   Joliet   file   format   is   recommended.
If the disc is recorded in another format, it may
not
  be   played   correctly.
It is recommended that the same recording
format is always used for an individual disc,
with as low a speed as possible (4x maximum)
for
  optimum   sound   quality.
In the particular case of a multi-session CD, the
Joliet
  format   is   recommended.
Information and advice
To play a disc which has already
been inserted, press the SOURCE
button several times in succession
and select CD .
Press one of the buttons to select a
folder
  on   the   CD.
Press one of the buttons to select a
track
  on   the   CD.
Press the LIST REFRESH button to
display the list of directories of the
MP3
  compilation.
Press and hold one of the buttons for
fast
  for ward   or   rewind   play.
Playing an MP3 CD
compilation
Insert an MP3 CD compilation in the player.
T he audio equipment searches for all of the
music
 
t
racks,  
w
hich  
m
ay  
t
ake  
a
nything  
b
etween  
a f

ew seconds and several tens of seconds,
before
  play   begins.
On a single disc, the CD player can
read up to 255 MP3 files spread over
8
  folder   levels.   However,   it   is   advisable  
t

o   keep   to   a   limit   of   two   levels   to   reduce  
t

he access time before the CD is
played.
While the CD is being played, the folder
structure
  is   not   followed.
All of the files are displayed on a single
level.
Audio and Telematics