ESP Citroen C CROSSER 2008 1.G Owner's Guide

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
165
Selecting changer mode If the changer already
contains a disc, press the
“CD” button.
“CD”, the disc and track
numbers and the playing time appear
on the display.
After inserting at least one disc, printed
face upwards, the changer starts
automatically.
Ejecting a disc Press this button briefl y to
remove the current disc
from the changer. Once ejected, if the compact disc is
not removed within fi fteen seconds it
is re-loaded into the changer.
Loading a disc
appears on the display.
When the changer is ready,
the indicator light on the
“LOAD” button comes on
and “LOAD DISC N° (1-6)” appears on
the display.
If several slots are empty, select one
using one of the “DISC” buttons.
The CD changer can hold up to 6 CDs.
Press the “LOAD” button briefl y. “WAIT”
Insert circular compact discs only.
8 cm compact discs cannot be
played by the changer. Loading all of the discs Ejecting all of the discs
Press this button for more
than two seconds. The
current disc is ejected.
Once this disc has been
removed, the next disc is ejected
automatically in its turn.
Repeat these steps until unloading is
complete.
Selecting a disc Press one of the “DISC”
buttons several times in
succession until you reach
the disc required. The
symbol of the disc selected
appears on the display.
See also “CD-Text display” and “MP3 /
Tag ID3 CD”.
Press the “LOAD” button for
more than two seconds.
The changer selects an
empty slot number from the
lowest to the highest and switches to
waiting for loading mode.
“LOAD DISC N° (1-6)” appears on
the display; insert the disc in the
corresponding slot.
The changer automatically selects the
next empty slot number and returns to
waiting for loading mode.
Repeat these steps until loading is
complete. Play begins with the last disc
inserted.
CD CHANGER

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
166
Playing of the beginning of each track Press the “SCAN” button to
start the playing of the fi rst
ten seconds of each track
on the disc. “SCAN” appears
on the display and the corresponding
track number fl ashes.
To exit this mode, press this button
again.
On CD-R/RWs, the quality of the
playing sound depends on the
encoding software, the burning device
and the burning speed used.
Random playing on all of the discs Press the “RDM” button for
more than two seconds to
start random playing of the
tracks on all of the discs. “D-
RDM” appears on the display.
To exit this mode, press this button
again.
Fast search
Press and hold button “  ”
or “  ” to carry out a rewind
or fast forwards search
respectively.
Play begins when the button
is released.
Selecting a track Press button “  ” or “  ” to
select the previous track or
next track respectively.
Repeating a track Press the “RPT” button to
repeat the playing of the
current track. “RPT” appears
on the display.
To exit this mode, press this
button again. Random playing of a disc
Press the “RDM” button to
start random playing of the
tracks on the disc. “RDM”
appears on the display.
To exit this mode, press this button
again. Repeating a disc
Press the “RPT” button for
more than two seconds to
repeat the playing of the
tracks of the current disc.
“D-RPT” appears on the display.
To exit this mode, press this button
again.
Audio CD

DE
E1E2E3E4
D1D2
D3D4
A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
201
Time and date, language, unit,
picture size
E - Choose the size of the DVD picture
for:
E1 - normal 4/3,
E2 - extends the picture evenly to the right and to the left in wide screen mode,

E3 - extends the right and left parts only
leaving the centre as it stands in wide
screen mode,
E4 - enlarges the picture in 4/3 format.The top and the bottom are outside the
frame.
D
- Choose the base settings of the
system for:

D1 - setting of the time by the RDS signal,
time zone, summer time,

D2 - the language (English, Français,
Deutsch, Nederlands, Portuguese,
Español, Svenska, Italiano, Dansk),

D3 - the units for calculation of the
distances (km or miles and °C or °F),

D4 - other settings such as:
- the voice guidance volume,
- the type of voice guidance voice (female or male),
- the volume of the operation bleeps (1 to 3 and 0=no bleep),
- the type of inputting keypad (alphabet or PC),
- the range of menu colours (red or blue),
- the displaying or not of the audio playing icons on the map screen,
- the reinitialisation of the vehicle sensor,
- the interruption or not of the display when the air conditioning is used.

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
210
Making a telephone call using a number, phone book
A Bluetooth ®
compatible mobile
telephone must be matched with the
system.
Using a telephone number
If your vehicle is fi tted with the audio-
telematics display, you can use the
press buttons to dial a number then
make a call. Recording a name in the system’s
phone book
The system has its own phone book,
independent of that of the mobile
telephone.
It can contain up to 32 names for each
language.
Each name in the phone book is
associated with 4 locations: HOME,
WORK, MOBILE and PAGER.
1 - Press the SPEAK button. 7 - The system says “HOME, WORK,
MOBILE OR PAGER”.
2 - Day “Dial”.
4 - Say the telephone number.
5 - The system asks you to con- fi rm this number, answer
“Yes”. Say “No” to return to
the previous step. 2 - Say “Phone book”.
4 - Say “New entry”.
6 - Say the name of your choice. 8 - Say the location which
corresponds to the number
that you wish to record.
10 - Answer “Yes” or say “No” to return to step 7.
12 - If you do not wish to change the telephone number,
repeat the original number
to retain it, otherwise say the
new number.
14 - Answer “Yes” or say “No” to return to step 11.
1 - Press the SPEAK button.
3 - The system says “Number please”.
3 - The system says “Select one of the following items: New Entry, Change,
List of names, Delete or Clear all,
or say Cancel to return to the main
menu”.
5 - The system says “Name please”.
To enter a new number: 9 - The system asks you to confi rm the
location.
11 - If a telephone number has already been recorded for this location, the
system says “The current number
is , number please”.
13 - The system asks you to confi rm the number.

A U D I O E Q U I P M E N T a n d T E L E M A T I C S
XI
211
Making a telephone call using a name in the phone book, receiving a call
Using a name in the system’s phone
book
The name must be recorded in the
system’s phone book. 8 - Answer “Yes” or say “No” to
return to step 4.
Redialling the last number Receiving a call
The telephone ring is transmitted on the
speaker by the front passenger’s seat.
If an audio source (CD, radio, ...) is in
operation when the call is received, it is
placed on mute and only the incoming
call is heard.
When the ignition switch is in the ACC
or ON position, the audio system is
activated automatically if an incoming
call is received, even if it was originally
off.
1 - Press the PICK UP button.
At the end of the call, the audio system
returns to its previous status.
1 - Press the SPEAK button.
2 - Say “Call”.
4 - Say the name of the person that you wish to call.
6 - Say the location corresponding to the number that you wish to
call. 1 - Press the SPEAK button.
2 - Say “Redial”.
3 - The system says “Name please”.
5 - If several telephone numbers have
been recorded for this person, the
system says “Do you wish to call
{home}, {work}, {mobile} or
{pager}?”
7 - The system requests confi rmation of the name. 9 - The system says “Call to at
” and makes the call.