ESP Citroen C ZERO 2011 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2011, Model line: C ZERO, Model: Citroen C ZERO 2011 1.GPages: 164, PDF Size: 8.98 MB
Page 6 of 164

Familiarisation
4
Normal charging fl ap
This flap should be used to recharge your
vehicle from a domestic power point.
Fast charging fl ap
This flap should be used to recharge your
vehicle from a special fast charging station.
80
84
Temporar y puncture repair kit
This kit is a complete system consisting of a
compressor and a sealant cartridge, to allow
the temporary repair of a tyre.
90
Exterior
ASR and ESP systems
These are associated systems that assure the
directional stability of the vehicle, within the
limits of the laws of physics.
72
Page 9 of 164

.Familiarisation
7
Instruments and controls
1.
Driver’s airbag.
Horn.
2.
Instrument panel.
3.
Wiper stalk.
4.
Side vents.
5.
Window demisting vent.
6.
Electric window switches and switch
for deactivating the the front and rear
passenger electric window controls.
7.
Opening control for the fast charging flap
(vehicle left hand side).
8.
Bonnet release lever.
9.
Opening control for the normal charging
flap (vehicle right hand side).
10.
Fusebox.
11.
Door mirror controls.
12 .
Headlamp height adjustment.
ASR /ESP deactivation switch.
13.
Steering lock and ignition switch.
Page 20 of 164

Monitoring
18
Instrument panel
Panel bringing together the various gauges and indicators for the operation of the vehicle.
1.
State of charge gauge for the main
battery.
Drive
selector position indicator.
2.
Energy consumption/generation
indicator.
3.
Speedometer.
4.
Screen.
A.
Total distance recorder.
B.
Trip distance recorder (Trip A or B).
C.
Instrument panel lighting dimmer.
D.
Indicator of distance remaining to the
next service.
E.
Indicator of time remaining to the next
service.
F.
Indicator of remaining range.
5.
Screen control button.
Displays the various functions in turn.
Resets the function selected (trip recorder
or ser vice indicator).
Adjusts the level of instrument lighting.
For more information, refer to the
corresponding section.
Gauges and indicators
Screen
Page 22 of 164

Monitoring
20
Operation indicator lamps
If one of the following indicator lamps comes on in the instrument panel, this confirms that the corresponding system has come into operation.
Warning/indicator lamp
State
Cause
Action/Observations
Left-hand
direction indicato
r
Flashing with audible
signal. The lighting stalk is pushed down.
Right-hand
direction indicator
Flashing with audible
signal. The lighting stalk is pushed up.
Hazard warning
lamps
Flashing with audible
signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction indicators and
their associated indicator lamps flash simultaneously.
Sidelamps
and/
or dipped beam
headlamps
On fixed. The sidelamps and/or dipped beam
headlamps are on.
Front foglamps
On fixed. The front foglamps are switched on. Turn the ring on the stalk rear wards twice to switch off
the front foglamps.
Rear foglamp
On fixed. The rear foglamp is switched on. Turn the ring on the stalk rear wards to switch off the
rear foglamp.
Main beam
headlamps
On fixed. The lighting stalk is pulled towards
you. Pull the stalk to return to dipped beam headlamps.
Page 23 of 164

1
Monitoring
21
Warning/indicator lamp
State
Cause
Action/Observations
Ready
(ready to move
off) On fixed,
accompanied by an
audible signal when it
comes on. The vehicle is ready to move off and
you can press the accelerator. The illumination period corresponds to the powering-
up of the vehicle.
Parking brake
On fixed. The parking brake is applied or not
properly released. Release the parking brake to switch off the warning
lamp, keeping your foot on the brake pedal.
Obser ve the safety recommendations.
For fur ther information on the parking brake, refer to
the "Driving" section.
Main batter y
charge (normal
or fast)
On fixed. The main battery is on charge. On completion of the charge, the lamp goes off.
Flashing. The charging cable is connected to
the vehicle but the main battery is not
yet charging. Check the connection of the charging cable.
Page 24 of 164

Monitoring
22
Deactivation indicator lamps
If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal.
Warning/indicator lamp
State
Cause
Action/Observations
Passenger's
airbag system
On fixed, on the
centre console. The control switch, located in the
glove box, is set to the OFF
position.
The passenger's front airbag is
deactivated. Set the control switch to the ON
position to activate
the passenger's front airbag. In this case, do not fit a
child seat in the rear-facing position.
Remember to check the state of the control switch
before starting your vehicle.
ESP/ASR
On fixed. The ESP/ASR off switch, located
in the dashboard (driver’s side) is
activated.
The ESP/ASR is deactivated.
ESP: electronic stability programme
ASR: anti-slip regulation. Press the button to activate the ESP/ASR.
The ESP/ASR system is automatically activated on
starting the vehicle.
Page 26 of 164

Monitoring
24
Warning/indicator lamp
State
Cause
Action/Observations
Electronic
stability
programme
and anti-slip
regulation
(ESP/ASR)
Flashing. Activation of the ESP/ASR systems. The systems optimise traction and improve the
directional stability of the vehicle.
Adapt your driving and moderate your speed.
On fixed. Fault in the ESP/ASR systems. Have it checked by a CITROËN dealer or a qualified
workshop.
+
Door(s) open
On fixed,
accompanied by an
audible signal. A door or the boot is still open. Close the door or boot.
Ancillaries
battery charge
On fixed. The ancillaries battery charging
circuit has a fault (dir ty or loose
terminals, slack, transformer fault, ...). The warning lamp should go off when the motor is
started.
If it does not go off, contact a CITROËN dealer or
qualified workshop.
Electric power
steering
On fixed. The electric power steering has a
fault. Drive carefully at reduced speed.
Have it checked by a CITROËN dealer or a qualified
workshop.
Page 30 of 164

i
Monitoring
28
Instrument panel screen
When the ignition switch is in the " ON
" position, press button A
repeatedly to display the following information in turn.
Distance recorder
System for measuring the total distance
travelled by the vehicle during its life.
Press button A
.
The total distance appears in the screen.
Reset to zero
With the ignition on and either trip A
or B
displayed, press the button for more than
2 seconds.
Trip distance recorder (Trip A or B)
Each of these trip recorders indicates the
distance travelled since the last reset.
Press button A
to display the desired trip.
Changing the speedometer units
With the total distance recorder displayed,
press and hold button A
for a few seconds to
change the speedometer units (mph or km/h).
The range indicator is displayed in the
units (miles or km) corresponding to those
of the speedometer (mph or km/h).
Page 36 of 164

i
!
Access
34
1.
Driver's electric window switch.
2.
Passenger's electric window switch.
3.
Rear right electric window switch.
4.
Rear left electric window switch.
5.
Deactivating the passenger and rear
electric window switches.
Electric windows
Operation
Deactivating the passenger and
rear electric window switches
)
For the safety of your children, press switch 5
to prevent operation of the passenger and rear
electric windows irrespective of their position.
When the button is pressed down, the switches
are deactivated.
When the button is raised, the switches are activated.
System which opens or closes a window manually or automatically. It is fitted with a deactivation system to prevent misuse of the rear controls.
The electric window switches
remain operational for approximately
30 seconds after the ignition is
switched off.
The windows can no longer be opened
or closed after the driver's door is
closed. With the ignition on:
)
Press the switch gently to open or pull it
gently to close. The window stops as soon
as the switch is released.
- Automatic one-touch mode
(driver's side)
)
Press the switch fully to open. The
driver's window opens completely when
the switch is released.
)
Pressing the switch again stops the
movement of the window.
Always remove the key from the ignition when leaving the vehicle, even for a
shor t time.
In the event of contact during operation
of the windows, you must reverse the
movement of the window. To do this,
press the switch concerned.
When the driver operates the passenger electric window switches, they must
ensure that no one is preventing correct
closing of the windows.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows.