ESP Citroen C ZERO 2011 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2011, Model line: C ZERO, Model: Citroen C ZERO 2011 1.GPages: 164, PDF Size: 8.98 MB
Page 52 of 164
Comfort
50
4. Air intake/Air recirculation
5. Air conditioning On/Off
Switching on
)
Press the "A /C "
button, the associated
indicator lamp comes on.
The air conditioning does not operate when
the air flow adjustment is set to off.
Switching off
)
Press the "A /C "
button again, the
associated indicator lamp goes off.
Switching off may result in some discomfor t
(humidity, misting).
6. "MAX" button
The intake of exterior air prevents the formation
of mist on the windscreen and side windows.
The recirculation of interior air isolates the
passenger compar tment from exterior odours
and smoke.
Return to exterior air intake as soon as possible
to prevent deterioration of the the air quality
and the formation of mist.
)
Press this button to recirculate
the interior air. The indicator
lamp comes on to confirm this.
)
Press the button again to
permit the intake of exterior air.
The indicator lamp switches off
to confirm this.
The air conditioning is designed to
operate effectively in all seasons,
with the windows closed.
It enables you to:
- lower the temperature, in summer,
- increase the effectiveness of the demisting
in winter, above 3 °C.
This button allows the passenger compar tment
to be quickly heated or cooled. It only works
when the air flow control is not in the " OFF
"
position.
Press this button. The corresponding
indicator lamp comes on.
The place the temperature control in
the desired position:
- on "●" for maximum ventilation,
- between "●" and "H" for maximum heating,
- between "C" and "●" for maximum air
conditioning.
Page 56 of 164
Driving
54
P.
Park.
This position is used for star ting the
vehicle.
To come out of the P
position, you must
have your foot on the brake.
R.
Reverse.
N.
Neutral.
D.
Drive (For ward).
Drive selector
Selector positions
When you move the drive selector through the
grille to select a position, the corresponding
indicator is displayed in the instrument panel.
Displays in the instrument panel
With the motor running, P
appears in the
instrument panel screen.
)
Press the brake pedal to come out of
position P
.
)
Select for ward ( D
) or reverse ( R
) gear.
)
Release the parking brake.
)
Take your foot off the brake pedal, the
vehicle then moves off slowly to facilitate
manoeuvring.
)
Accelerate to go for wards or backwards.
)
"D"
or "R"
appears in the instrument panel
screen.
Moving off
Page 58 of 164
Visibility
56
Lighting controls
Main lighting
The various front and rear lamps of the vehicle
are designed to adapt the lighting progressively
in relation to the climatic conditions and so
ensure the best visibility for the driver:
- sidelamps, to be seen,
- dipped beam headlamps to see without
dazzling other drivers,
- main beam headlamps to see clearly when
the road is clear.
Additional lighting
Other lamps are provided to fulfil the
requirements of par ticular driving conditions:
- a rear foglamp to be seen from a distance,
- front foglamps for even better visibility,
- daytime running lamps to be seen during
the day.
Selection ring for main lighting
mode
Turn the ring to position the symbol required
facing the mark.
Automatic illumination of headlamps.
Sidelamps only.
Dipped or main beam headlamps.
Stalk for switching headlamp beam
Pull the stalk to switch the lighting between
dipped/main beam headlamps.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
Displays
Illumination of the corresponding indicator lamp
in the instrument panel confirms the lighting
switched on.
Lighting off.
Page 74 of 164
!
Safety
72
Anti-slip regulation (ASR)
and electronic stability
programme (ESP)
Trajectory control systems
Deactivation
In exceptional conditions (starting a vehicle
which is bogged down, stuck in snow, on soft
ground, ...), it may be advisable to deactivate
the ASR and ESP systems, so that the wheels
can move freely and regain grip.
)
Press this button button, located on the
dashboard to the right of the steering
wheel, until the corresponding symbol
appears in the instrument panel screen.
Activation
These systems are activated automatically
each time the vehicle is star ted.
They come into operation in the event of a grip
or trajectory problem.
The display of this symbol indicates
that the ASR and ESP systems are
deactivated.
Reactivation
These systems are not reactivated
automatically.
)
Press this button again to reactivate them
manually.
The symbol going off in the instrument panel
indicates the reactivation of the ASR and ESP
systems.
The anti-slip regulation (also known as Traction
Control) optimises traction to prevent skidding
of the wheels, by acting on the brakes of the
driving wheels and on the engine.
The electronic stability programme acts on the
brake of one or more wheels and on the engine
to keep the vehicle on the trajectory required
by the driver, within the limits of the laws of
physics.
This is indicated by flashing of this
warning lamp in the instrument panel.
The ASR /ESP systems offer
exceptional safety in normal driving, but
this should not encourage the driver to
take extra risks or drive at high speed.
The correct functioning of these
systems depends on obser vation of
the manufacturer’s recommendations
regarding the wheels (tyres and rims),
the braking components, the electronic
components and the assembly
and repair procedures used by the
CITROËN dealer network.
After an impact, have these systems
checked by a CITROËN dealer or a
qualified workshop.
Operating fault
The display of this message
in the instrument panel
indicates a malfunction of
these systems.
Contact a CITROËN dealer or a qualified
workshop to have the ASR /ESP systems checked.
Page 80 of 164
!
Safety
78
Lateral airbags
Deployment
The lateral airbags are deployed unilaterally in
the event of a serious side impact applied to all
or par t of the side impact zone B
, perpendicular
to the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The lateral airbag inflates between the hip and
shoulder of the front occupant of the vehicle
and the corresponding door trim panel. System which protects the driver and front
passenger in the event of a serious side impact
in order to limit the risk of injury to the chest,
between the hip and the shoulder.
Each lateral airbag is fitted in the seat backrest
frame, door side.
Impact detection zones
A.
Front impact zone.
B.
Side impact zone.
Curtain airbags
System which protects the driver and
passengers in the event of a serious side
impact in order to limit the risk of injury to
the head.
Each cur tain airbag is fitted in the pillars
and the upper section of the passenger
compartment. In the event of a minor impact or bump
on the side of the vehicle or if the
vehicle rolls over, the airbag may not be
triggered.
In the event of a rear or front collision,
the airbag is not triggered.
Deployment
Each cur tain airbag is deployed at the same
time as the corresponding lateral airbag in the
event of a serious side impact applied to all or
par t of the side impact zone B
, perpendicular
to the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The cur tain airbag inflates between the front or
rear occupant of the vehicle and the windows.
If this warning lamp comes on in
the instrument panel, contact a
CITROËN dealer or a qualified
workshop to have the system
checked. The airbags may no longer
be deployed in the event of a serious
impact.
Operating fault
Page 107 of 164
8
i
!
Practical information
105
Changing a fuse
The extraction tweezer is fitted to the back of
the fusebox cover in the dashboard (right hand
side).
For access:
)
Unclip the cover and remove it completely
by pulling it towards you.
)
Remove the tweezer.
Access to tools
Before changing a fuse, the cause of
the failure must be identified
and rectified.
)
Check that the ignition switch is in
the " LOCK
" position.
)
Identify the failed fuse by checking
the condition of its filament.
Changing a fuse
Good Failed
)
Use the special tweezer to extract the fuse
from its location.
)
Always replace the failed fuse with a fuse
of the same rating.
)
Check that the number marked on the box,
the rating marked on the top of the fuse
and the tables below all agree. CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying the malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in par ticular when the
consumption of all of the additional
equipment connected exceeds
10 milliamperes. Your vehicle’s electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, contact a CITROËN dealer or a
qualified workshop.
Page 111 of 164
8
Practical information
109
Access to the fuses
)
Open the bonnet (refer to the "Checks"
section),
)
Unclip the cover and remove it completely
by pulling towards you.
)
Change the fuse (refer to the
corresponding paragraph).
)
When you have finished, close the cover
carefully to ensure sealing of the fusebox.
Fuse N°
Rating
Functions
11
10 A
On-board charger.
12
10 A
Direction indicator.
13
10 A
Horn.
14
10 A
Daytime running lamps.
15
15 A
Battery fan.
16
10 A
Air conditioning compressor.
17
20 A
Right hand dipped beam.
18
20 A
Left hand dipped beam, headlamp adjusters.
19
10 A
Right hand main beam.
20
10 A
Left hand main beam.
Page 112 of 164
i !
!
Practical information
110
Towing the vehicle
Procedure for having your vehicle towed using fixed mechanical equipment.
To w i n g y o u r v e h i c l e
The towing eye is welded to the body below the
front bumper.
)
Install the towing bar.
)
Start your vehicle ("Ready" lamp on).
)
Put the drive selector in position N
.
)
Release the parking brake.
)
Switch on the hazard warning lamps on
your vehicle.
)
Have your vehicle towed for no more than
20 miles (30 km) without exceeding a
speed of 20 mph (30 km/h)
.
When towing the vehicle with the four
wheels on the ground, always use a
towing bar.
When towing with only two wheels on
the ground, use professional lifting
equipment.
Failure to follow these instructions may
cause damage to braking components
and the electric motor.
Changing a wiper
blade
Removing a front or rear
wiper blade
)
Raise the corresponding wiper arm.
)
Remove the wiper blade, sliding it towards
the outside.
Fitting a front or rear wiper
blade
)
Put the new wiper blade in place and
secure it.
)
Fold down the wiper arm carefully.
Towing another vehicle
Your vehicle cannot be used in any
circumstances to tow another vehicle.
Page 115 of 164
9
Checks
113
TOTAL & CITROËN
TOTAL and CITROËN personnel combine their
talents to optimise the efficient use of energy and
reduce the impact on the environment.
The par tnership between our two groups, which
is on an international scale, does not merely
amount to the supply and maintenance of
vehicles to the public: our positions as industrial
leaders allow us to meet the environmental
challenges of today and of tomorrow.
To provide ecologically responsible mobility to
everyone is more than our motor, it is our passion.
Innovation is on the way, the future of
the
automobile
depends on it; we will meet
it together.
prefers
PARTNERS IN THE FUTURE OF
THE AUTOMOBILE
CITROËN
Page 119 of 164
9
!
Checks
117
Checking levels
Check all of these levels regularly and top them up if necessary, unless other wise indicated.
If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop.
Never do anything in the compar tments
when the "Ready" lamp is on or when
your vehicle is being charged.
Take care when carrying out checks
in the front and rear compar tments as
some par ts of the compar tments can be
very hot (risk of burns): wait at least one
hour after stopping the motor or the end
of the charging procedure before
carrying out any work.
Brake fluid level
The brake fluid level should be
between the "MIN" and "MA X"
marks. If it is not, check the brake
pad wear.
Changing the fl uid
Refer to the servicing booklet for details of
the interval for this operation.
Fluid specifi cation
The brake fluid must conform to the
manufacturer's recommendations and meet
the DOT4 standard.
Front compartment
Heating system fluid level
Changing the fl uid
The fluid does not have to be changed.
Fluid specifi cation
The fluid must conform to the manufacturer's
recommendations.
The level of this fluid should be between the "L"
MIN and "F" MA X marks.
Screenwash fluid level
Top up the level when necessary.
Fluid specifi cation
For optimum cleaning and to avoid freezing,
this fluid must not be topped up or replaced
with plain water.