key Citroen C ZERO 2015 1.G Owner's Manual

We draw your attention to the following...
keysa

fety warning
additional information
contributes to the protection of the environment
refer to the page indicated
Reading the detailed sections is essential to
make the most of your vehicle, in complete
safety.
Your vehicle is fitted with only some of the
equipment described in this document,
depending on the trim level, version and the
specifications for the country in which it is sold.
The fitting of electrical equipment or
accessories which are not recommended
by CITROËN may result in a failure of
your vehicle's electronic system. Contact
a CITROËN dealer for information on the
recommended equipment and accessories.
CITRoËn h
as a presence on every continent,
a complete product range,
bringing together technology and a permanent spirit of innovation,
for a modern and creative approach to mobility.
We thank you and congratulate you on your choice.
Happy motoring!
at the wheel of your new vehicle,
g etting to know each system,
each control, each setting,
makes your trips, your journeys
more comfortable and more enjoyable.

.
.
C-zero_en_Chap00a_sommaire_ed01-2014
Instrument panel 9
In dicator and warning lamps
10
M

ain battery state of charge indicator
18
E

nergy consumption
/ g
eneration indicator
19
D

istance recorder
20
T

rip distance recorder
20
L

ighting dimmer
21
S

ervice indicator
21
R

ange indicator
23
Monitoring
over
view
Eco-driving
Remote control key 24
D oors
27
Boo

t
28
E

lectric windows
29
C

harging flaps
30
access
Front seats 31
R ear seats
33
M

irrors
35
In

terior fittings
37
V

entilation
40
H

eating
42
A

ir conditioning
42
F

ront demist - defrost
45
R

ear screen demist - defrost
45
Comfort
Driving recommendations 46
S tarting - stopping the vehicle
47
P

arking brake
48
D

rive selector
49
Driving
Lighting controls 51
A utomatic illumination of headlamps
53
H

eadlamp adjustment
53
W

iper control
54
C

ourtesy lamp
55
Visibility
Contents

24
C-zero_en_Chap02_ouvertures_ed01-2014
System used for centralised locking or unlocking of the vehicle using the door lock barrel or from a distance. It is also used to start the vehicle, as well
as providing protection against theft.
Remote control key
Unfolding / Folding
the key
F First press button A to unfold or fold
the k ey.
Unlocking using the remote
control
F Press the open padlock to unlock
the vehicle.
Locking the vehicle
Unlocking is confirmed by the interior lighting
which comes on for approximately 15 seconds
and the direction indicators which flash twice .
Depending on version, the door mirrors unfold
at the same time.
Unlocking using the key
F Turn the key to the right in the driver's
do or lock to unlock the vehicle.
Locking is confirmed by the interior lighting,
which comes on for about 15 seconds and the
direction indicators, which flash twice .
On the other hand, the door mirrors are not
unfolded (see the "door mirrors" section).
Normal locking using the remote
control
F Press the closed padlock to lock
t he vehicle.
Locking is confirmed by the direction indicators
which come on once .
Depending on version, the door mirrors fold at
the same time.
Normal locking using the key
F Turn the key to the left in the driver's door
l ock to lock the vehicle.
Locking is confirmed by the direction indicators,
which flash once .
On the other hand, the door mirrors are not
folded (see the "door mirrors" section).
The vehicle will lock itself again
automatically after thirty seconds
unless a door or the boot is opened.
This function avoids inadvertent
unlocking.
The passenger's door lock barrel does
not lock or unlock the other doors or
the boot.
Unlocking the vehicle
Access

25
C-zero_en_Chap02_ouvertures_ed01-2014
Anti-theft protection
Electronic immobiliser
The key contains an electronic chip which has
a special code. When the ignition is switched
on, this code must be recognised to permit
starting.
This electronic immobiliser locks the control
system a few moments after the ignition is
switched off and prevents starting by anyone
who does not have the key.
In the event of a malfunction and if your vehicle
does not start, contact a CITROËN dealer as
soon as possible.
Remote control problem
In the event of a remote control malfunction,
you can neither unlock nor lock your vehicle.
F
Fi
rst of all, use the key in the driver's door
lock to unlock or lock your vehicle.
F
Th

en, contact a CITROËN dealer to check
the operation of the remote control and
replace the battery if necessary.
2
Access

26
C-zero_en_Chap02_ouvertures_ed01-2014
Lost keys
Visit a CITROËN dealer with the vehicle's V5 registration document and your personal
identification documents.
The CITROËN dealer will be able to retrieve the key code and the transponder code
required to order a replacement key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your
pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Do not repeatedly press the buttons of your remote control out of range and out of sight of
your vehicle. You run the risk of stopping it from working.
The remote control does not operate when the key is in the ignition, even when the ignition
is switched off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the
emergency services more difficult in an emergency.
As a safety precaution (with children on board), remove the key from the ignition when you
leave the vehicle, even for a short time.
Anti-theft protection
Do not make any modifications to the electronic immobiliser system; this could cause
malfunctions.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your
possession are the only ones which can start the vehicle.
Access

27
C-zero_en_Chap02_ouvertures_ed01-2014
doors
From outside
F After unlocking the vehicle using the
remote control or the key, pull the door
handle.
From inside
F Pull the front or rear door control to open
t he door.
If the doors are locked:
-
op

ening the driver's door unlocks the other
doors,
-
th

e front passenger or rear doors must
then be unlocked manually using the front
locking control before they can be opened.
If a door or the boot is not closed
correctly, this warning lamp comes on
in the instrument panel until the door
in question or the boot is closed.
Opening
ClosingLocking/ unlocking from
the
i

nside
F Press the button on the driver's door
t
owards the front to lock and towards the
rear to unlock the vehicle completely.
The buttons on the front and rear
passenger doors only lock / unlock the
door in question.
2
access

28
C-zero_en_Chap02_ouvertures_ed01-2014
boot
Opening
F After unlocking the vehicle using the
remote control or the key, press the
handle
A a

nd open the tailgate. F Pu
ll the handle B downwards to guide the
tailgate down,
F
re

lease the handle and press the exterior
sur face of the tailgate gently to close it.
Closing
access

29
C-zero_en_Chap02_ouvertures_ed01-2014
1. Driver's electric window.
2. Pa ssenger's electric window.
3.
Re

ar right electric window.
4.
Re

ar left electric window.
5.
Dea

ctivating the passenger and rear
electric window switches.
Electric windows
Operation
Deactivating the passenger and
rear electric window switches
F For the safety of your children, press switch 5
to prevent operation of the passenger and rear
electric windows irrespective of their position.
When the button is pressed down, the switches are
deactivated.
When the button is raised, the switches are activated.
System which opens or closes a window manually or automatically. It is fitted with a deactivation system to prevent misuse of the rear controls.
The electric window switches
remain operational for approximately
30
s

econds after the ignition is switched
of f.
The windows can no longer be opened
or closed after the driver's door is
closed.
With the ignition on:
F
Pr

ess the switch gently to open or pull it
gently to close. The window stops as soon
as the switch is released.
Always remove the key from the ignition
when leaving the vehicle, even for a
short time.
In the event of contact during operation
of the windows, you must reverse the
movement of the window. To do this,
press the switch concerned.
When the driver operates the
passenger electric window switches,
they must ensure that no one
is preventing correct closing of
the
wi

ndows.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows.
Automatic one-touch mode (driver's side)
F
Pr

ess the switch fully to open. The driver's
window opens completely when the switch
is released.
F
Pr

essing the switch again stops the
movement of the window.
2
Access

47
C-zero_en_Chap04_conduite_ed01-2014
Starting - stopping the vehicle
- Position 1: LOCK The steering is locked.
-
Po

sition 2: ACC
Th

e ancillaries (radio, 12 V socket...) can
be used.
-
Po

sition 3: ON
Ig

nition on.
-
Po

sition 4: S TA R T
"R

eady" lamp on.
Mo

tor ready to drive the vehicle.
Ignition switch
F Check that the drive selector is in
position P.
F In

sert the key in the ignition switch.
F
Tu

rn the key to position 4 (S TA R T ) .
Starting Stopping
F Stop the vehicle.
F Ke ep your foot on the brake pedal.
F
Pl

ace the drive selector in position P .
F
Ap

ply the parking brake.
F
Tu

rn the key to position 1 (LOCK) .
F
Re

move the key from the ignition switch.
F
Ho

ld it in this position for a few
seconds until the " RE ADY " lamp
comes on accompanied by an
audible signal.
F
Re

lease the key.
Th

e key returns automatically to position 3
(ON) . Do not attach any heavy objects to the
key as this could weigh down on it when
in the ignition switch and cause a fault.
If you use the ancillaries for a prolonged
period (with the key in the ACC position),
you risk discharging the ancillaries
battery. Starting your vehicle will then no
longer be possible. Be aware .
4
Driving

50
C-zero_en_Chap04_conduite_ed01-2014
To tow your vehicle, the drive selector
must be in position N, refer to "Practical
Information".
Parking the vehicle
To stop the motor, you must select position P .
You must apply the parking brake to immobilise
the vehicle.
To remove the key from the ignition switch, the
drive selector must be in position P .
Driving