phone CITROEN C-ZERO DAG 2017 Handbook (in English)

161
C-Zero_en_Chap10a_RDE2_ed01-2016
QUESTIONANSWER SOLUTION
An iPod is not recognised
when connecting to the
USB port. The iPod is of a generation that is not compatible with the USB
connection.
The hard disk or device
is not recognised when
connecting to the USB
port. Some hard disks and devices need a power supply greater than is
provided by the audio system.
Connect the device to the 230 V socket, the 12 V
socket or an external power supply.
Caution
: ensure that the device does not transmit
a voltage greater than 5 V (risk of destruction of
the system).
When streaming, the sound
cuts momentarily. Some telephones prioritise connection of the "hands-free" profile.
Delete the "hands-free" connection profile to
improve streaming.
In "Random all" play, not all
of the tracks are played. In "Random all" play, the system can only take into account up to
999 tracks.
With the engine off, the
audio system switches off
after a few minutes of use. When the engine is switched off, the audio system operating time
depends on the battery charge.
The switch-off is normal: the audio system switches to economy
mode and switches off to prevent discharging the vehicle's battery. Start the vehicle's engine to increase the battery
charge.
The message "the audio
system is overheated"
appears on the display. In order to protect the installation if the surrounding temperature
is too high, the audio system switches to an automatic thermal
protection mode leading to a reduction of the volume or stopping of
the playing of the CD. Switch the audio system off for a few minutes to
allow the system to cool.
.
Audio and Telematics

1
2
1
2
163
C-Zero_en_Chap10b_KENWOOD_ed01-2016
KENWOOD - KDC-X7000DAB
For more information, consult the KENWOOD
user guide provided with the system.
For obvious safety reasons, the vehicle
must be stationary when the driver
carries out operations which require
sustained attention.
Short press: on.
Long press: off.
Rotation: adjust the volume, navigate
in a list.
Press: confirm.
Change audio source.
Short press: search for a service.
Long press: updating of the list of
stations available.Abandon the current operation.
Go up one level.
Reject or end a call.
Select an analogue waveband FM1 /
FM2 / FM3 / MW / LW.
Select a digital waveband DB1
/
DB2 / DB3.
Change of search method (automatic
or manual). Navigate in a list.
Short press: search for a radio
station, a frequency or a service,
search for a previous/next track or
file, navigate in a list.
Long press: Rewind / fast for ward.
Short press: select a stored radio
station.
Long press: store a radio station.
Short press: accept an incoming
call, switch between two calls, enter
Bluetooth mode.
Long press: smartphone voice
commands via the system.
Fitting the control
panel.
Removing the control
panel.
.
Audio and Telematics