Citroen C1 2016 1.G Owner's Manual

129
C1_en_Chap06_securite_ed01-2016
Child seats recommended by CITROËN
Group 0+: from bir th to 13 kgGroups 2 and 3: from 15 to 36 kg
L1
"RÖMER
  Baby-Safe   Plus"  
I

nstalled   in   the   rear ward   facing   position. L4

"KLIPPAN
  Optima"
From
  22   kg   (approximately   6   years),  
the
  booster   is   used   on   its   own.L5

"RÖMER KIDFIX"
Can
  be   fitted   to   the   vehicle's   ISOFIX   mountings.
The
  child   is   restrained   by   the   seat   belt.
CITROËN
  offers   a   range   of   recommended   child   seats   which   are   secured   using   a   three point seat
belt .
6
Safety

130
C1_en_Chap06_securite_ed01-2016
Installation of child seats attached using the seat belt
In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a) in
accordance   with   the   weight   of   the   child   and   the   seat   in   the   vehicle.
Weight of the child and indicative age
Seat Under 13 kg
Groups 0 (b) and 0+ Up
  to   about   1   yearFrom 9 to 18 kg
Group 1
From
  about   1   to   3   yearsFrom 15 to 25 kg
Group 2
From
  about   3   to   6   yearsFrom 22 to 36 kg
Group 3
From about  6  t o  1 0  ye ars
Front passenger sea t ( c) (e) U (R)* U (R)* U (R)* U (R)*
Rear seats (d) UUUU
*
  On   a   front   seat:
-
 
F
or   the   installation   of   a   child   seat   with   a   base:   if   there   is   inter ference   with   the   vehicle's   seat   backrest   when   fitting   a   child   seat   with   base,   adjust   the  
b

ackrest   until   there   is   no   longer   any   inter ference.
-
 F

or   the   installation   of   a   for ward   facing   child   seat:   if   there   is   a   gap   between   the   child   seat   and   the   vehicle   seat's   backrest,   adjust   the   backrest   until   the
 c

hild   seat   is   in   contact   with   the   backrest.   If   the   upper   seat   belt   anchorage   is   in   front   of   the   belt   guide   on   the   child   seat,   move   the   vehicle   seat   for ward.
-
 
F
or   the   installation   of   a   booster   cushion:   if   the   child   is   in   a   too   vertical   position,   adjust   the   backrest   to   give   a   more   comfortable   position.   If   the   upper  
s

eat   belt   anchorage   is   in   front   of   the   belt   guide   on   the   child   seat,   move   the   vehicle   seat   for ward.
Safety

131
C1_en_Chap06_securite_ed01-2016
a: Universal  child   seat:   child   seat   that   can   be  i
nstalled   in   any   vehicle   using   the   vehicle's  
s

eat   belt.
b :
 
G
roup   0:   from   birth   to   10   kg.   Infant   car  
s

eats   and   "car   cots"   cannot   be   installed   on  
t

he
 f
ront
 p
assenger
 sea
t.
 W

hen   installed   on   the   2
nd row, they may p
revent
 
the
 
use
 
of
 
the
 
other   seats.
c :
 
R

efer
 
t

he
 
l

egislation
 
i

n
 
f

orce  
i
n  
y
our  
c
ountry  
b

efore
 
installing
 
your
 
child   on   this   seat.
d :
 
T

o
 
install
 
a
 
child
 
seat
 
on
 
a   rear   seat,  
r

ear ward
 
or
 
for ward
 
facing,   move   the  
v

ehicle's
 
seats
 
in
 
front
 
for wards   and  
s

traighten
 
the
 
backrests
 
to   leave   enough  
s

pace
 
for
 
the
 
child
 
seat
 
and   the   child's  
l

egs.
e :
 
W

hen
 
a
 
rear ward
 
facing
 
child   seat   is  
i

nstalled
 o

n the front passenger seat ,
the
 
passenger's
 
front
 
airbag   must   be  
d

eactivated.
 O

therwise,
 t
he child would
risk being seriously injured or killed
during deployment of the airbag .
 W

hen
 
a
 
for ward
 
facing
 
child   seat   is  
i

nstalled
 o

n the front passenger seat ,
the
 
passenger's
 
front
 
airbag   must   remain  
a

ctive. Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   with   a  
b

ackrest   on   a   passenger   seat.   Refit   the  
h

ead   restraint   once   the   child   seat   has  
b

een   removed.
U
:   
S
eat   suitable   for   the   installation   of   a  
u

niversally   approved   child   seat   secured  
u

sing   a   seat   belt,   rear ward   facing   and/or  
f

or ward   facing,   with   the   passenger   seat  
a

djusted   to   the   midway   longitudinal   position.
U (R) :   
s
ame   as   for   U
,   with   the   vehicle's   seat   in  t
he   fully   back   position   and   the   backrest  s
traightened.
6
Safety

132
C1_en_Chap06_securite_ed01-2016
Your vehicle has been approved in accordance with the latest ISOFIX regulation .
The
  seats,   represented   below,   are   fitted   with  
r

egulation
 I
SOFIX
 m
ountings:
"ISOFIX" mountings
There are three mountings for each seat: -  
a
  mounting   B   behind   the   seat   for   fixing  
t

he   upper   strap,   referred   to   as   the   TOP
TETHER . I t   is   identified   by   a   marking.
The TOP TETHER   is   used   to   secure   the  
u

pper   strap   of   child   seats   that   have   one.   This  
a

rrangement   limits   the   for ward   tipping   of   the  
c

hild   seat   in   the   event   of   a   front   impact.
This ISOFIX
 

mounting   system   provides   fast,  
r

eliable   and   safe   fitting   of   the   child   seat   in   your  
v

ehicle. Follow
  the   instructions   for   fitting  
c

hild   seats   contained   in   the   seat  
m

anufacturer's   installation   guide.
The
  incorrect   installation   of   a   child   seat  
i

n   a   vehicle   compromises   the   child's  p
rotection   in   the   event   of   an   accident.
The ISOFIX child seats   are   fitted   with  
t

wo   latches   which   are   secured   on   the   two  
m

ountings
 A.
S

ome   seats   also   have   an   upper strap,
known
  as   the   Top   Tether,   which   is   attached   to  
m

ounting
 B. T

o   secure   the   child   seat   to   the   TOP TETHER
:
-  
r
emove   and   stow   the   head   restraint   before  
i

nstalling   the   child   seat   in   this   seating  
p

osition   (refit   it   once   the   child   seat   has  
b

een   removed),
-  
p
ass   the   strap   of   the   child   seat   over   the  
t

op   of   the   seat   backrest,   between   the  
a

pertures   for   the   head   restraint   rods,
-  
f
ix   the   hook   of   the   upper   strap   to   the  
anc

horage
 B
,
-
 
t
ighten   the   upper   strap.
For   information   on   the   possibilities   for   installing  
I

SOFIX
 
child   seats   in   your   vehicle,   refer   to   the  
s

ummary   table.
-
 
t
wo   mountings   A,
  located   between   the  
v

ehicle   seat   back   and   cushion,   indicated   by  
a

  marking,
Safety

133
C1_en_Chap06_securite_ed01-2016
"Baby P2C Mini" and its ISOFIX bas e
(size c ategories: C , D, E)
Group 0+: from bir th to 13 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase   which   is   attached   to   the   anchorage  
r

ings
 A .
T

he   base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This
  seat   can   also   be   secured   with   a   seat  
bel

t.
In
 
this   case   only   the   seat   shell   is   used   and   is  
a

ttached   to   the   vehicle's   seat   by   the   three-
point
  seat   belt.
ISOFIX child seats recommended by CITROËN
CITROËN offers a range of ISOFIX child seats listed and type approved for your vehicle.
R efer   also   to   the   child   seat   manufacturer's   fitting   instructions   for   information   on   installing   and   removing   the   seat.
The
  ISOFIX   BABY   P2C   base   must   be   installed   so   that   on   the   ISOFIX   clamps,   the   N
os 3, 4 and 5 are visible. And the support leg must have 6 holes visible.
"
RÖMER Baby- Safe Plus" and its ISOFIX base
(size
 
category:
 
E )
Group 0+: from bir th to 13 kg
Installed
 
rear ward
 
facing
 
using   an   ISOFIX  
b

ase
 
which
 
is
 
attached
 
to
 
the
 
rings   A.
The
 
base
 
has
 
a
 
support
 
leg,
 
adjustable   for  
h

eight,
 
which
 
sits
 
on
 
the
 
vehicle's   floor.
This
 
child
 
seat
 
can
 
also
 
be
 
secured   with   a  
s

eat
 
belt.
 
In
 
this
 
case,
 
only
 
the   shell   is   used  
a

nd
 
attached
 
to
 
the
 
vehicle's
 
seat   by   the  
t

hree-point
 
seat
 
belt.
6
Safety

134
C1_en_Chap06_securite_ed01-2016
"Baby P2C Midi" and its ISOFIX base (size categories: D , C, A, B, B1)
Group 1: from 9 to 18 kg
Installed
  rear ward   facing   using   an   ISOFIX  
b

ase   which   is   attached   to   the   anchorage  
r

ings
 A .
T

he   base   has   a   support   leg,   adjustable   for  
h

eight,   which   sits   on   the   vehicle's   floor.
This
  child   seat   can   also   be   used   for ward  
f

acing.
This seat can not
 

be   secured   with   a   seat  
bel

t.
We
  recommend   that   you   use   the   seat   in   the  
r

ear ward   facing   position   up   to   the   age   of  
3 ye

ars. "RÖMER Duo Plus ISOFIX"
(size   category:   B1)
Group 1: from 9 to 18 kg
Is
  installed   only   in   the   for ward   facing  
p

osition.
Is
  attached   to   the   anchorage   rings   A   and   the  
u

pper   anchorage   ring   B,
  referred   to   as   the  
T

OP   TETHER,   using   an   upper   strap.
Three
  seat   body   angles:   sitting,   reclining,  
l

ying   down.
We
  recommend   the   lying   down   position.
This
  child   seat   can   also   be   used   on   seats  
n

ot   equipped   with   ISOFIX   mountings.   In  
t

his   case,   it   must   be   secured   to   the   vehicle's  
s

eat   by   the   three-point   seat   belt.   Adjust   the  
p

osition   of   the   vehicle's   front   seat   so   that   the  
c

hild's   feet   are   not   touching   the   backrest.
Safety

135
C1_en_Chap06_securite_ed01-2016
Table of locations for ISOFIX child seats
In accordance with the European regulation, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX m ountings.
In
  the   case   of   the   universal   and   semi-universal   ISOFIX   child   seats,   the   child   seat's   ISOFIX   size   category,   determined   by   a   letter   between   A   and   G, is
indicated
  on   the   child   seat   next   to   the   ISOFIX   logo.
IUF :
  
S
eat   suitable   for   the   installation   of   an  
Un

iversal I sofix
  seat,   For ward
  facing   with  
t

he   "Top   Tether"   upper   strap.
IL- SU :
  
S
eat   suitable   for   the   installation   of   a  
Se

mi-Universal I SOFIX
  seat,   that   is:
-
 
r
ear ward   facing   fitted   with   an   upper   strap  
o

r   a   support   leg
-
 
f
or ward   facing   fitted   with   a   support   leg
-
 
a
n   infant   carrier   fitted   with   an   upper   strap  
o

r   a   support   leg. Weight of the child
  /   indicative   age
Less than 10 kg (group 0)
Up to about 6 months Less than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
  to   about   1   yearFrom 9 to 18 kg (group 1)
From
  about   1-3   years
Type of ISOFIX child seat Infant carrierrearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front passenger seat Not ISOFIX
Rear seats XIL- SU

(2) I L- SU (1) IL- SU
(2) IL- SU
(1) IUF
IL- SU
Remove
  and   stow   the   head   restraint  
b

efore   installing   a   child   seat   with   a  
b

ackrest   on   a   passenger   seat.   Refit   the  
h

ead   restraint   once   the   child   seat   has  
b

een   removed.
To attach the upper strap, refer to the "ISOFIX
mountings"
 se

ction.
(1) :
  
T
he   front   seat   must   be   adjusted   to  
9
  notches   back   from   the   fully   for ward  
p

osition.
(2):
  
T
he   front   seat   must   be   adjusted   to  
4 n

otches   back   from   the   fully   for ward  
p

osition.
6
Safety

136
C1_en_Chap06_securite_ed01-2016
The incorrect installation of a child seat in a vehicle   compromises   the   child's   protection   in  
t

he   event   of   an   accident.
Check
  that   there   is   no   seat   belt   or   seat   belt  
b

uckle   under   the   child   seat   as   this   could  
de

stabilise
 i
t.
Remember
  to   fasten   the   seat   belts   or   the  
c

hild   seat   harnesses   keeping the slack in
relation
  to   the   child's   body   to a minimum,
even
  for   short   journeys.
For
  the   installation   of   a   child   seat   using   a  
s

eat   belt,   ensure   that   this   is   well   tensioned  
o

n   the   child   seat   and   that   it   is   holding   the  
c

hild   seat   firmly   against   the   seat   of   your  
v

ehicle.   If   your   front   passenger   seat   is  
a

djustable,   move   it   for ward   if   necessary.
At the rear seats, always leave sufficient
space
  between   the   front   seat   and:
-
 
a
  rear ward   facing   child   seat,
-
 
t
he   feet   of   a   child   seated   in   a   for ward  
f

acing   child   seat.
For
  this,   move   the   front   seat   for ward   and   if  
n

ecessary   straighten   its   backrest.
Recommendations on child seats
The chest part of the seat belt must be positioned   on   the   child's   shoulder   without  
t

ouching   the   neck.
Ensure that the lap part of the seat belt
passes
  correctly   over   the   child's   thighs.
CITROËN
  recommends   the   use   of   a   booster  
s

eat   which   has   a   back,   fitted   with   a   seat   belt  
g

uide   at   shoulder   level.
As
  a   safety   precaution,   never   leave:
-
 
o
ne   or   more   children   alone   and  
u

nsupervised   in   a   vehicle,
-
 
a
  child   or   an   animal   in   a   vehicle   which  
i

s   exposed   to   the   sun,   with   the   windows  
c

losed,
-
 
t
he   keys   within   reach   of   children   inside  
t

he   vehicle.
To
  prevent   accidental   opening   of   the   doors,  
u

se   the   "Child   lock".
Take
  care   not   to   open   the   rear   windows   by  
m

ore   than   one   third.
To
  protect   young   children   from   the   rays   of  
t

he   sun,   fit   side   blinds   on   the   rear   windows.
The
 
legislation
 
on
 
carrying
 
a
 
child
 
on
 
the
 
f

ront
 
passenger
 
seat
 
is
 
specific
 
to
 
each
 
c

ountry.
 
Refer
 
to
 
the
 
legislation
 
in
 
force
 
in
 
y

our
 
country.
Deactivate
 
the
 
passenger's
 
front
 
airbag
 
w

hen
 
a
 
rear ward
 
facing
 
child
 
seat
 
is
 
installed
 
o

n
 
the
 
front
 
seat.
 
Other wise,
 
the
 
child
 
would
 
r

isk
 
being
 
seriously
 
injured
 
or
 
killed
 
if
 
the
 
a

irbag
 
were
 
deployed.
For
 o

ptimum
 in

stallation
 o

f
 t

he
 fo

rward
 f

acing
 c

hild
 
seat,
 
ensure
 
that
 
the
 
back
 
of
 
the
 
child
 s
eat
 
is
 
as
 
close
 
as
 
possible
 
to
 
the
 
backrest
 o
f
 
the
 
vehicle's
 
seat,
 
or
 
in
 
contact
 
if
 
possible.
The
 
head
 
restraint
 
must
 
be
 
removed
 
before
 
i

nstalling
 
a
 
child
 
seat
 
with
 
a
 
backrest
 
on
 
the
 
p

assenger
 sea

t.
Ensure
 
that
 
the
 
head
 
restraint
 
is
 
stowed
 
or
 
a

ttached
 
securely
 
so
 
that
 
it
 
is
 
not
 
thrown
 
a

round
 
the
 
vehicle
 
in
 
the
 
event
 
of
 
sharp
 
b

raking.
Refit
 
the
 
head
 
restraint
 
as
 
soon
 
as
 
the
 
child
 
s

eat
 
is
 
removed.
Installing a booster
cushion
Children at the front
Safety

137
C1_en_Chap06_securite_ed01-2016
Child lock
This prevents the opening of the rear doors from   the   inside.
The
  controls   are   located   on   the   edge   of   each  
r

ear   door.
F
 
L
ower   the   control.
Check
  the   status   of   this   safety   device   before  
s

witching   on   the   ignition.
This
  system   is   independent   of   the   central  
l

ocking.
6
S

138
C1_en_Chap07_info-pratiques_ed01-2016
Fuel tank
Low fuel levelRefuelling
When the low fuel level is reached, t
his   warning   lamp   comes   on,  
a

ccompanied   by   an   audible   signal.
The
 
message   "LO   FUEL"   is   displayed   in   place  
o

f
 
the
 
range.
You have approximately 5 litres remaining.
In
 
certain
  driving   conditions   and   depending   on  
t

he
 
engine,   the   distance   which   can   be   travelled  
w

ith
 
the
 
fuel   remaining   may   be   less   than  
3

0 miles
 
(50   km). To
  refuel   in   complete   safety:
F

Y
ou must stop the engine and switch off
the ignition (ignition in "LOCK" position
or "OFF" mode) .
F
 
P
ull   the   control   on   the   lower   dashboard,  
d

river's   side,   to   release   the   filler   flap.
F
 
O
pen   the   fuel   filler   flap.
If
 
you   run   out   of   fuel,   the   emission  
c

ontrol   system   warning   lamp   may   come  
o

n
 
in   the   instrument   panel.   It   will   go   off  
a

utomatically   after   the   engine   has   been  
s

tarted   a   few   times. Refuelling
  must   only   be   done   with the engine
stopped and the ignition switched off ( ignition s

witch in the "LOCK" position or " OFF"
  mode).
The capacity of the fuel tank is approximately 35 litres.
Additions  of   fuel   must   be   of   at   least   5   litres   to  
b

e   registered   by   the   fuel   gauge.
A
  label   on   the   inside   of   the   flap   reminds   you  
w

hich   type   of   fuel   to   use.
There
  may   be   an   inrush   of   air   when   removing  
t

he   filler   cap.   This   vacuum   is   per fectly   normal  
a

nd   results   from   the   sealing   of   the   fuel   system.
Practical information