Windscreen Citroen C1 2016 1.G User Guide

114
C1_en_Chap06_securite_ed01-2016
Operating faults
Sensor fault
The operation of the laser sensor may suffer inter ference   from   accumulations   of   dirt   or  
m

isting   of   the   windscreen   or   the   presence   of  
a

n   object   causing   an   obstruction   (e.g.:   bonnet  
ope

n). In
  this   case   you   are   warned   by   the  
d

isplay   of   this   flashing   warning   lamp  
i

n   the   instrument   panel.
Use
  the   windscreen   demisting   and   regularly  
c

lean   the   area   of   the   windscreen   in   front   of   the  
sen

sor.Do
  not   stick   or   other wise   fix   any   object  
o

n   the   windscreen   in   front   of   the   sensor.
System fault
In the event of a malfunction of the   system,   you   are   warned   by   the  
d

isplay   of   this   flashing   warning   lamp  
i

n   the   instrument   panel.
Have
 
the
 
system   checked   by   a   CITROËN  
d

ealer
 
or
 
a   qualified   workshop.
In
 
the   event   of   an   impact   to   the  
w

indscreen   at   the   sensor,   deactivate  
t

he
  system   and   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop to   have  
y

our   windscreen   replaced.
Never
  try   to   remove,   adjust   or   test   the  
sen

sor.
Only
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   is   able   to   work   on   the   system.
Safety

141
C1_en_Chap07_info-pratiques_ed01-2016
Electrical energy economy mode*
System which manages the duration of use of certain functions to conserve a sufficient level of charge   in   the   battery.
After
  the   engine   has   stopped,   you   can   still   use   functions   such   as   the   audio   system, windscreen  
w

ipers,   dipped   beam   headlamps, courtesy   lamps,   etc.   for   a   maximum   combined   duration   of  
t

wenty minutes.
This
  period   may   be   greatly   reduced   if   the   battery   is   not   fully   charged.
Let
  the   engine   run   for   the   duration  
s

pecified   to   ensure   that   the   battery  
c

harge   is   sufficient.
Do
  not   repeatedly   and   continuously  
r

estart   the   engine   in   order   to   charge   the  
b

attery.
A
  flat   battery   prevents   the   engine   from  
s

tarting.
Refer
  to   the   "Battery"   section.
Switching to economy mode
Once this time has elapsed the active functions are   put   on   standby.
Exiting economy mode
These functions are reactivated automatically next   time   the   vehicle   is   driven.
To restore the use of these functions
immediately,
  start   the   engine   and   let   it   run   for   at  
l

east   5   minutes.
*
  
O
nly   on   vehicles   with   the   "Keyless   Entry   and  
S

tarting"   system.
7
Practical information

144
C1_en_Chap07_info-pratiques_ed01-2016
Fitting roof bars
When fitting transverse roof bars, use the accessories   recommended   by   CITROËN   and  
f

ollow   the   manufacturer's   fitting   instructions.
For
  more   information,   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop. Please
  refer   to   national   legislation   in  
o

rder   to   comply   with   the   regulations  
c

oncerning   the   transportation   of   objects  
w

hich   are   longer   than   the   vehicle.
Maximum weight authorised on the bars,
for a loading height not exceeding 40 cm
(except bicycle carrier): 40 kg.
If the height exceeds 40 cm, adapt the
speed of the vehicle to the profile of the
road to avoid damaging the roof bars.
Changing a wiper 
b
lade
Removing the front wiper blade
F Raise   the   wiper   arm.
F  R emove   the   wiper   blade,   sliding   it   towards  
t

he   outside.
Fitting the front wiper blade
F Put  the   corresponding   new   wiper   blade   in  p
lace   and   fix   it.
F
 
F
old   down   the   wiper   arm   carefully.
To conserve the effectiveness of
the
  flat-blade   type   wiper   blades,   we  
r

ecommend   that   they   are:
-
 
h
andled   with   care,
-
 
c
leaned   regularly   with   soapy   water,
-
 
n
ot   used   to   hold   a   cardboard   sheet  
a

gainst   the   windscreen,
-
 
r
eplaced   at   the   first   signs   of   wear.
Practical information

147
C1_en_Chap07_info-pratiques_ed01-2016
1. Screenwash  fluid   reservoir.
2. C oolant   header   tank.
3.
 A

ir   filter.
4.
 B

rake   fluid   reservoir.
5.
 B

attery.
6.
 F

usebox.
7.
 E

ngine   oil   dipstick.
8.
 E

ngine   oil   filler   cap.
9.
 R

emote   earth   point.
Petrol engines
PureTech 82
VTi 68
For
 
access
 
to
 
the
 
brake
 
fluid
 
reservoir
 
a

nd
 
t

he
 
f

usebox,
 
u

nclip
 
t

he
 
p

lastic
 
c

over
 
a

t
 
the
 
base
 
of
 
the
 
windscreen,
 
pressing
 o
n
 
the
 
two
 
tongues.
Refer
 
to
 
the
 
"Changing
 
a
 
fuse"
 
section.
7
Practical information

168
C1_en_Chap08_en-cas-pannes_ed01-2016
Changing a fuse
Access to toolsThe fuseboxes are located behind the dashboard   in   the   passenger   compartment   and  
n

ext   to   the   battery   under   the   bonnet.
The
  extraction   tweezer   is   fixed   at   the   front   of  
t

he
 u
nderbonnet
 f
usebox.
F
 
U
nclip   the   plastic   cover,   located   below  
t

he   windscreen,   by   pressing   on   the   two  
c

atches.F
 
U
nclip   the   fusebox   cover   by   pressing   on  
t

he   lug   on   the   right.
F
 
R
emove   the   tweezer.
When
  unclipping   the   plastic   cover,   take  
c

are   not   to   remove   the   seal.
In the event of a breakdown

173
C1_en_Chap08_en-cas-pannes_ed01-2016
Fuse
N° Rating

(A) Functions
1 10Right
  hand   dipped   beam
2 10Left
  hand   dipped   beam   -   Headlamp   adjustment
3 7. 5Right
  hand   main   beam
4 7. 5Left
  hand   main   beam
5 * 15Fuel
  injection   system
6 * 7. 5Fuel
  injection   system
7 * 15Fuel
  injection   system
8 * 7. 5Cooling
  fan
9 7. 5Air
 c

onditioning
10 ** 7. 5Fuel
  injection   system   -   Brake   lamps   -   Third   brake   lamp
11 5Courtesy
  lamp   -   Boot   lamp
12 10
Direction indicators - Hazard warning lamps - Instrument panel - Display screen
Fuses under the bonnet
F Unclip  the   plastic   cover,   located   below  t
he   windscreen,   by   pressing   on   the   two  
c

atches.
F
 
U
nclip   the   fusebox   cover   by   pressing   on  
t

he   lug   on   the   right,   for   access   to   the   fuses.
When
  you   have   finished,   carefully   refit   the  
c

ove r.
*
  PureTech   82   engine.
**
  VTi   68   engine.
8
In the event of a breakdown