brakes Citroen C1 RHD 2016 1.G Owner's Manual

80
The vehicle can be stopped whatever the position   of   the   gear   selector   (N , E or R ).
However,
  there   is   an   audible   signal   on   opening  
t

he   driver's   door   if   the   gear   selector   is   not   at  
p

osition N .
Switching off
When the vehicle is stopped with the e
ngine   running,   always   put   the   gear  
s

elector to neutral N .
There
  is   a   continuous   audible   signal  
i

f   you   turn   the   ignition   switch   to   "OFF "
with
  the   vehicle   in   2
nd, 3rd, 4th or 5th ge a r.
In
 
this
 
case
 
return
 
the
 
ignition
 
switch  
t

o " ON ",
 
move
 
the
 
gear
 
selector
 
to  
p

osition


N , then to position E , M or R,
then
 
turn
 
the
 
ignition
 
switch
 
to
 
" OFF ".
On
 
a
 
slope,
 
use
 
the
 
brakes
 
to
 
i

mmobilise
 
the
 
vehicle
 
and
 
place
 
the  
g

ear
 
selector
 
in
 
position
 
N , E or R . With
  the   ignition   on,   illumination  
o

f   this   warning   lamp   indicates   a  
g

earbox   fault.
Contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating faults
In all cases, it is essential
that you
apply the parking brake  to   immobilise  
t

he   vehicle.
Before
  doing   anything   under   the  
b

onnet,   check   that   the   gear   selector   is  
i

n neutral N   and   the   parking   brake   is  
a

pplied.
Limits of operation
On a gradient, or when hill start assist is activated, n ever hold the vehicle using the
accelerator :
  you   could   damage   the   clutch.
In
  these   situations   there   is   an   audible   signal.
F
 
M
ove   the   gear   selector   to   position   N.
F
 
W
ait   15   minutes   to   allow   the   clutch   to   cool  
d

own   before   setting   off. -
 
c
heck   that   the   ignition   switch   is   at   the  
"
O
N
"

position,
-  
p
lace   the   gear   selector   at   N
,   then   move   it  
t

o E
, M or R .
If 1   is   flashing   in   the   instrument   panel:
-  p lace   the   gear   selector   at   E or M
, then
move   it   to   N.
If R
  is   flashing   in   the   instrument   panel:
-
 
p
lace   the   gear   selector   at   R,
  then   move   it  
t

o N.
If
N is   flashing   in   the   instrument   panel
 a

ccompanied   by   an   audible   signal   for   a   long   time:
Driving

107
Electronic Stability Control (ESC) incorporating the   following   systems:
-
 
a
nti-lock   braking   system   (ABS)   and   the  
e

lectronic   brake   force   distribution   (EBFD),
-
 em

ergency
 b
raking
 a
ssistance,
-
 
t
raction   control   (TRC),
-
 
d
ynamic   stability   control   (DSC).
Electronic stability control (ESC)
Definitions
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)
These systems improve the stability and manoeuvrability   of   your   vehicle   when   braking  
a

nd   contribute   towards   better   control   in  
c

orners,   in   particular   on   poor   or   slippery   road  
su

rfaces.
The
  ABS   prevents   wheel   lock   in   the   event   of  
em

ergency
 b
raking.
The
  electronic   brake   force   distribution   system  
m

anages   the   braking   pressure   wheel   by   wheel.
Emergency braking assistance
In an emergency, this system enables you to reach   the   optimum   braking   pressure   more  
q

uickly   and   therefore   reduce   the   stopping  
di

stance.
It
  is   triggered   according   to   the   speed   at   which  
t

he   brake   pedal   is   pressed.   This   is   felt   by   a  
r

eduction   in   the   resistance   of   the   pedal   and   an  
i

ncrease   in   the   effectiveness   of   the   braking.
Traction control (TRC)
This system optimises traction in order to limit wheel   slip   by   acting   on   the   brakes   of   the   driving  
w

heels   and   on   the   engine.   It   also   improves  
t

he   directional   stability   of   the   vehicle   on  
a

cceleration.
Dynamic stability control (DSC)
If there is a difference between the path followed   by   the   vehicle   and   that   required   by   the  
d

river,   this   system   monitors   each   wheel   and  
a

utomatically   acts   on   the   brake   of   one   or   more  
w

heels   and   on   the   engine   to   return   the   vehicle  
t

o   the   required   path,   within   the   limits   of   the   laws  
o

f   physics.
6
Safety

108
Illumination of this warning lamp, accompanied   by   an   audible   signal,  
i

ndicates   that   there   is   a   fault   with   the  
e

lectronic   brake   force   distribution  
(

EBFD),   which   could   cause   loss   of  
c

ontrol   of   the   vehicle   when   braking.
Operation
Illumination of this warning lamp, accompanied   by   an   audible   signal,  
i

ndicates   that   there   is   a   fault   with  
t

he   ABS   system,   which   could   cause  
l

oss of control of the vehicle when
braking.
Anti-lock braking system (ABS)
and electronic brake force
distribution (EBFD)When changing  w heels  ( tyres  a nd  r ims),  m
ake   sure   that   these   are   approved   for  
y

our   vehicle.
Normal
  operation   of   the   ABS   may   make  
i

tself   felt   by   slight   vibration   of   the   brake  
ped

al.
In emergency braking, press
very firmly without releasing
the


pressure.
Yo u must
 

stop
 
as
 
soon
 
as
 
it
 
is
 
safe
 
to
 
do
 
so.
Contact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
w

orkshop
 
as
 
soon
 
as
 
possible.
Dynamic stability control (DSC)
and traction control (TRC)
Activation
These systems are activated automatically e ach   time   the   vehicle   is   started.
As
  soon   as   they   detect   a   problem   of   grip   or  
t

rajectory,   these   systems   act   on   the   operation   if  
t

he   engine   and   brakes.
Activation
  of   the   DSC   system   is
 s

ignalled   by   the   flashing   of   this
 i

ndicator   lamp   in   the   instrument   panel,
 a

ccompanied   by   an   audible   signal.
Activation
  of   the   TRC   system   is
 s

ignalled   by   the   flashing   of   this
 i

ndicator   lamp   in   the   instrument   panel.
Drive
 
carefully
 
at
 
reduced
 
speed,
 
and
 
contact
 
a
 
C

ITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Safety

152
ETG gearbox
The ETG gearbox does not require any   maintenance   (no   oil   change).
Refer
  to   the   manufacturer's   service  
s

chedule   for   the   checking   interval   for  
t

his
 c
omponent.
Brake
  wear   depends   on   the   style  
o

f   driving,   particularly   in   the   case  
o

f   vehicles   used   in   town,   over   short  
d

istances.   It   may   be   necessary   to  
Brake pads
For information on checking brake disc   wear,   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop.
Brake disc wearOnly use products recommended by CITROËN   or   products   of   equivalent  
q

uality
 an
d
 sp
ecification.
In
  order   to   optimise   the   operation   of  
u

nits   as   important   as   those   in   the  
b

raking   system,   CITROËN   selects   and  
o

ffers   very   specific   products.
After
  washing   the   vehicle,   dampness,  
o

r   in   wintry   conditions,   ice   can   form  
o

n   the   brake   discs   and   pads:   braking  
e

fficiency   may   be   reduced.   Make   light  
b

rake   applications   to   dry   and   defrost  
t

he   brakes.
Parking brake
If excessive travel or a loss of effectiveness   of   this   system   is  
n

oticed,   the   parking   brake   must   be  
c

hecked,
 e
ven
 b
etween
 t
wo services.
Checking
 
this   system   must   be   done   by   a  
C

ITROËN
  dealer   or   a   qualified   workshop.
have
 
the
 
condition
 
of
 
the
 
brakes
 
checked,
 
even
 
b

etween
 v

ehicle
 s

ervices.
Unless
 
there
 
is
 
a
 
leak
 
in
 
the
 
circuit,
 
a
 
drop
 
in
 
t

he
 
brake
 
fluid
 
level
 
indicates
 
that
 
the
 
brake
 
p

ads
 
are
 
worn. To
  avoid   damaging   the   electrical   units,  
n

ever use   a   high   pressure   jet   wash   in  
t

he   engine   compartment.
Practical information