seats Citroen C3 PICASSO 2012 1.G Owner's Manual

2
CONTENTS
Instrument panel 22Indicator and warning lamps 23Indicators 31Adjustment buttons 34
Ventilation 47Rear screen demist/defrost 49Heating 49Manual air conditioning 49Dual-zone digital air conditioning 51Scented air freshener 53Front seats 54Rear seats 56Mirrors 58Steering wheel adjustment 59
3 - COMFORT 47 Î 59
Remote control key 60Window controls 64
Doors 66Boot 68Panoramic sunroof 69Fuel tank 70Misfuel prevention (Diesel) 72
4 - ACCESS 60 Î 72
Lighting controls 73Headlamp adjustment 76Wiper controls 77Courtesy lamps 80Boot lamp 81
5 - VISIBILITY 73Î81
Conventional child seats 92Isofi x child seats 97Child lock 100
7 - CHILD
SAFETY 92Î 100 FAMILIARISATION 4
Î 19
1 - MONITORIN
G22Î 34
Screen without audio equipment 35Screen with audio equipment 37Trip computer 44
2 - MULTIFUNCTION
SCREENS 35 Î 46
Front fi ttings 82Rear fi ttings 86Boot fi ttings 89
6 - FITTINGS 82Î91
ECO-DRIVING 20Î21

6

Boot
2-position adjustable boot
This adjustable boot fl oor with two posi-
tions allows you to:


- maximise the volume of the boot,

- partition the boot (storing of the rear
parcel shelf...),

-
obtain a fl at fl oor from the boot opening to
the front seats, when the rear bench
seat is in the folded and fully back
position.

1.
Unlocking the vehicle.

2.
Opening the boot.



68





90



A.
Interior release lever.

B.
Exterior safety catch.

C.
Bonnet stay.



128



Bonnet
OPENING

21
Limit the causes of excessconsumption

Spread loads throughout the vehicle;
place the heaviest items in the bottom
of the boot, as close as possible to the
rear seats.
Limit the loads carried in the vehicle
and reduce wind resistance (roof bars,
roof rack, bicycle carrier, trailer...). Use
a roof box in preference.
Remove roof bars and roof racks after
use.

At the end of winter, remove snow tyres
and refi t your summer tyres.

Observe the recommendations on maintenance


Check the tyre pressures regularly,
when cold, referring to the label in the
door aperture, driver's side.
Carry out this check in particular:


- before a long journey,

- at each change of season,

- after a long period out of use.
Don't forget the spare wheel and the
tyres on any trailer or caravan.
Have your vehicle serviced regularly
(engine oil, oil fi lter, air fi lter...) and
observe the schedule of operations
recommended by the manufacturer.



When refuelling, do not continue after
the 3 rd cut-off of the nozzle to avoid
any overfl ow.


At the wheel of your new vehicle, it is only
after the fi rst 1 800 miles (3 000 kilome-
tres) that you will see the fuel consumption
settle down to a consistent average.

3
54
COMFORT
FRONT SEATS
Seat consisting of a seat cushion, a seat
back and a head restraint which can all
be adjusted to adapt your position for
ease of driving and comfort.

Driver's seat height adjustment
Seat back angle adjustment

Forwards-backwards adjustment


)
Raise the control bar and slide the
seat forwards or backwards.


)
Pull the control lever upwards to
raise or push it downwards to lower,
as many times as necessary, to ob-
tain the position required.


)
Push the control rearwards.

3
55
COMFORT


)
Press the control located under the
front end of the armrest to release it.

)
Move it to the low position.

)
Raise it notch by notch to reach the
desired position.
To place the armrest in the vertical posi-
tion, raise it and push it backwards be-
yond the point of resistance.

Head restraint height adjustment


)
To raise the head restraint, pull it up-
wards.

)
To remove the head restraint, press
the lug A
and pull the head restraint
upwards.

)
To put the head restraint back in
place, engage the head restraint
stems in the openings keeping them
in line with the seat back.

)
To lower the head restraint, press
the lug A
and the head restraint at
the same time. The head restraint is fi tted with
a frame with notches which pre-
vents it from lowering; this is a
safety device in case of impact.

The adjustment is correct when
the upper edge of the head re-
straint is level with the top of
the head.
Never drive with the head re-
straints removed; they must be
in place and adjusted correctly.

Adjusting the armrest
Additional adjustments










Heated seats control


)
Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:

0


:
Off.

1
:
Low.

2
:
Medium.

3
:
High.
With the engine running, the front seats
can be heated separately.

3
56
COMFORT







Table position of the front
passenger seat
Do not forget to fold the "aircraft"
type table fi xed on the back of
the seat fi rst.
For safety reasons, a passen-
ger sat in the rear of the vehicle
must not place his feet on the
front seat in the table position.
Placing this seat in the table position,
with the rear benchseat also in the table
position, allows you to transport long
objects.


)
Push the control upwards and guide
the seat back forwards to fold it onto
the seat cushion.

)
To put it back in place, lift up the seat
back and guide it rearwards until it
locks in. REAR SEATS
Forwards and backwards adjustment

Adjusting the seat back angle



)
Raise the control and slide the seat
forwards or backwards.
Each section (1/3 - 2/3) can be adjusted
individually.
The seat can be adjusted to 2 different
positions:


- a standard position,

- an angled (inclined) position.
To adjust the seat back:


)
Pull the control lever forwards.

5
76
VISIBILITY
In fog or snow, the sunshine
sensor may detect suffi cient
light. Therefore, the lamps will
not come on automatically.
Do not cover the sunshine sen-
sor, linked with the rain sensor
and located in the centre of the
windscreen behind the rear view
mirror; the associated functions
would no longer be controlled.

Linked with the Guide-me-home
lighting
Association with the automatic illumina-
tion of headlamps provides the guide-
me-home lighting with the following
additional options:


- automatic activation of guide-me-
home lighting when automatic illu-
mination of headlamps is switched
on (in the vehicle parameters of the
multifunction screen confi guration
menu),

- selection of the duration of main-
taining of the lighting for 15, 30 or
60 seconds in the vehicle param-
eters of the multifunction screen
confi guration menu (except for
monochrome screen A
where this
is preset).


Operating fault
In the event of a malfunction
of the sunshine sensor, the
lamps come on, this warn-
ing lamp is displayed in the
instrument panel and/or a message ap-
pears in the multifunction screen, ac-
companied by an audible signal.
Contact a CITROËN dealer or a quali-
fi ed workshop.
HEADLAMP ADJUSTMENT

The initial setting is position "0"
. To avoid causing a nuisance to other
road users, the height of the halogen
headlamps should be adjusted accord-
ing the load in the vehicle.

0.
1 or 2 people in the front seats.

-.
Less than 5 people.

1.
5 people.

-.
5 people + maximum authorised load.

2 - 3.
Driver + maximum authorised load.

6
86
FITTINGS
REAR INTERIOR FITTINGS
They are located on the back of the
front seats. Two boxes are available, located under
the rear passenger footwells.
To open them, lift the lid using the cut-out. There is a cup holder located at the rear
of the centre console.


Storage boxes Seat pockets
Cup holder

6
87
FITTINGS
Lift the catch to release the table and
unfold it.

Aircraft style tables

Reading lamps are built into the back of
the front seats, behind the tables. With
the ignition on, they illuminate the top of
the table without inconveniencing other
passengers.
They are only accessible if the table is
unfolded.


)
Press the button to switch the lamp
on or off.

Individual reading lamps

Do not place hard or heavy ob-
jects on the table. They could
become dangerous projectiles
in the event of sharp braking or
impact.
As a safety precaution, if too
much pressure is exerted the
table will fold downwards.

Side blinds

Blinds are available for the side windows.
Pull the side blind longways by the tab
to use it.
Always guide the blind slowly using
the tab.

6
90
FITTINGS
2-position adjustable boot
The two-position adjustable boot fl oor
allows you to:


- maximise the volume of the boot,

- partition the boot (stowing the rear
shelf...),

- obtain a fl at fl oor from the boot open-
ing to the front seats, when the rear
bench seat is in the folded and fully
back position.
Placing the adjustable boot fl oor in
the low position


)
Lift the adjustable boot fl oor by pull-
ing on the strap.

)
Move the adjustable boot fl oor rear-
wards and then down, following the
guides on the sides.

Placing the adjustable boot fl oor in
the high position


)
Lift the adjustable boot fl oor by pull-
ing the strap.

)
Move the adjustable boot fl oor rear-
wards then up to its high position.
In the high position, the adjustable boot
fl oor allows stowing of the rear parcel
shelf and fragile objects.
The adjustable boot fl oor is fi tted with
four stowing rings to secure your loads
using the net available as an acces-
sory.
Ensure that your boot is empty
before handling the adjustable
boot fl oor.