navigation system Citroen C3 PICASSO RHD 2016 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2016, Model line: C3 PICASSO RHD, Model: Citroen C3 PICASSO RHD 2016 1.GPages: 296, PDF Size: 9.13 MB
Page 7 of 296

5
Dual-zone digital air 
conditioning
This system allows you to set a different 
level of comfort for the driver and front 
passenger. It then controls this level 
automatically relative to the ambient 
conditions.
Cruise control / Speed 
limiter
These two functions control the speed 
of the vehicle in relation to the value that 
you have programmed.46
132 / 134
Scented air freshener
This air freshener diffuser diffuses the 
fragrance that you have selected throughout 
the passenger compartment by means of its 
location in the ventilation system.
201
49
Interior
Audio and communication 
systems
These systems benefit from the latest 
technology: MP3 compatible audio 
system, eMyWay audio and navigation 
system, auxiliary sockets, emergency or 
assistance call.
. 
Over view  
Page 33 of 296

31
Options
Once the "Options" menu has been selected, 
you can start diagnostics of the status of the 
equipment (active, not active, faulty).
Language
Once the " Language " menu has been 
selected, you can change the language used 
by the display by selecting a new language 
from the list offered.
Units
Once the " Units" menu has been selected, 
you can change the units of the following 
parameters:
-
 
t
 emperature (°C or °F),
-
 
f
 uel consumption (l/100 km, mpg or km/l).
The chosen language will also be used 
in the eMyWay satellite navigation 
colour screen. As a safety measure, configuration of 
the multifunction screen by the driver 
must only be done when stationary. Once the fuel consumption unit has 
been changed to l/100 km or km/l, 
the information relating to speed and 
distance also changes to kilometres.
Vehicle configuration
Once the "
Vehicle configuration " menu has 
been selected, you can activate or deactivate 
the following systems:
-
 
w
 iper linked with reverse gear (refer to the 
"Visibility" section),
-
 
"
 guide-me-home" lighting (refer to the 
"Visibility" section),
-
 
d
 aytime lighting (refer to the " Visibility" 
section).
Using this menu, you can also reinitialise the 
tyre under-inflation detection system (refer to 
the "Safety" section).
2 
Multifunction screens  
Page 34 of 296

32
Displays in the eMyWay 
satellite navigation colour 
screen
Display configuration
This menu allows you to choose a colour 
scheme for the screen, adjust its brightness, 
set the date and choose the units for distance 
(km or miles), fuel consumption (l/100 km, 
mpg or km/l) and temperature (°Celsius or 
°Fahrenheit).
This displays the following information:
-
 
time,
-
 
date,
-
 a
udio functions,
-
 p
arking sensor information (depending on 
version),
-
 n
avigation system information.
"SETUP" menu
Press the SETUP button to access the 
"SETUP"  menu. It gives you access to the 
following functions:
-
 "
Display configuration",
-
 
"
 Voice synthesis setting",
-
 
"
 Trip computer". Adjusting the date and time
F
 P ress the SETUP
 button.
F  Sel ect "Display configuration " and press 
the knob to confirm.
F
 
Sel
 ect "Adjust date and time " and press 
the knob to confirm.
F
 
A
 djust the settings one by one using the 
directional arrows then confirm by pressing 
the knob.
Select " Synchronisation of minutes 
with GPS " for the minutes to be adjusted 
automatically by satellite reception. 
Multifunction screens  
Page 42 of 296

40
Trip computer, a few definitions
When the range falls below 20 miles (30 km), 
dashes are displayed. After filling with at least 
5 litres of fuel, the range is recalculated and is 
displayed when it exceeds 60 miles (100 km).
Range
(miles or km)
The distance which can still be 
travelled with the fuel remaining 
in the tank (related to the 
average fuel consumption over 
the last few miles (kilometres) 
travelled).
Current fuel  
consumption
(mpg or l/100 km or km/l)
Calculated over the last few seconds.
Average fuel 
consumption
(mpg or l/100 km or km/l)
Calculated since the last trip 
computer reset.
Distance travelled
(miles or km)
Calculated since the last trip 
computer reset.
Average speed
(mph or km/h)
Calculated since the last trip 
computer reset.
Distance remaining to 
destination
(miles or km)
This is the distance remaining to be 
travelled to the final destination. It 
is either calculated instantly by the 
navigation system, if guidance is 
activated, or entered by the user.
If the distance is not entered, dashes 
are displayed in place of the digits.
If dashes are displayed continuously 
while driving in place of the digits, 
contact a CITROËN dealer or a 
qualified workshop. This value may vary following a change 
in the style of driving or the relief, 
resulting in a significant change in the 
current fuel consumption. This function is only displayed from 
20
 
mph (30 km/h). 
Multifunction screens  
Page 112 of 296

110
The system is reinitialised with the ignition 
on and the vehicle stationary, via the vehicle 
configuration menu.
F 
P
 ress the MENU  button for access to the 
main menu.
F
 
P
 ress the " 5" or " 6" button to select 
the Veh conf ig  menu, then confirm by 
pressing the OK  button.
F
 
P
 ress the " 5" or " 6" button to select 
" Reinit inflat ", then confirm by pressing 
the OK  button.
F
 
Sel
 ect "yes" or " no" then press OK.
 A m
essage is displayed asking you to 
confirm the instruction.
F
 
C
 onfirm by pressing the OK  button.
F
 
C
 onform then quit the menu. F
 
P
 ress the MENU button for access to the 
main.
F
 
P
 ress the "5" or " 6" button to select the 
menu, " Personalisation-configuration " 
then confirm by pressing the button OK.
F
 
P
 ress the "5" or " 6" button to select the 
" Define vehicle parameters ", menu, then 
confirm by pressing the OK  button.The new pressure settings registered are 
considered to be reference values by the 
system.
Vehicles without audio or 
navigation system Vehicles with audio system
F Press the "
5" or " 6" button to select 
the " Tyre pressures" , menu then the 
" Reinitialisation " menu, then confirm by 
pressing the OK  button.
 A
 message confirms the reinitialisation. 
Safety  
Page 181 of 296

179
Fuse N°Rating Functions
F8 20 AMultifunction screen, audio system, navigation radio.
F9 30 AAudio system (fitted as an option), 12 V socket.
F10 15 ASteering mounted controls.
F11 15 AIgnition, diagnostic socket.
F12 15 ARain / sunshine sensor, trailer relay unit.
F13 5 AMain stop switch, engine relay unit.
F14 15 AParking sensors control unit, seat belt unfastened warning 
lamp, airbag control unit, instrument panel, air conditioning, 
USB Box.
F15 30 ALocking.
F16 -Not used.
F17 40 ARear screen and door mirrors demist/defrost.
SH -PARC shunt.
11 
Practical information  
Page 188 of 296

186
Load reduction mode
System which manages the use of certain 
functions according to the level of charge 
remaining in the battery.
When the vehicle is being driven, the load 
reduction function temporarily deactivates 
certain functions, such as the air conditioning, 
the heated rear screen...
The deactivated functions are reactivated 
automatically as soon as conditions permit.
Energy economy mode
Exiting economy mode
These functions are reactivated automatically 
the next time the vehicle is driven.
F 
I
 n order to resume the use of these 
functions immediately, start the engine and 
let it run for a few minutes.
The time available to you will then be double 
the period for which the engine is left running. 
However, this period will always be between 
five and thirty minutes.
Switching to economy mode
Once this period has elapsed, a message 
appears on the multifunction screen indicating 
that the vehicle has switched to economy mode 
and the active functions are put on standby.
A flat battery prevents the engine from 
starting (refer to the corresponding 
paragraph).
If the telephone is being used at the 
same time on the eMyWay audio 
navigation system, it will be interrupted 
after 10 minutes.
System which manages the period of use of certain functions to conserve a sufficient level of 
charge in the battery.
After the engine has stopped, you can still use functions such as the audio equipment,
  windscreen 
wipers, dipped beam headlamps,   courtesy lamps, etc. for a maximum combined period of 
thirty
 
 minutes.
This period may be greatly reduced if the battery is not fully charged. 
Practical information  
Page 195 of 296

193
"Multimedia":
semi-integral navigation systems, Bluetooth® 
hands free kit, audio systems inter faced to 
steering mounted controls, speakers,   
DVD player, portable navigation systems, 
mapping updates, Hi-Fi module, driving aid 
assistant, rear multimedia support, telephone 
and smartphone carriers, iPhone
® charger, 
head-up display, 230 Volt socket, fleet 
management unit,
 
... The fitting of electrical equipment or 
accessories which are not recommended 
by CITROËN may result in a failure of 
your vehicle's electronic system and 
excessive electrical consumption.
Contact a CITROËN dealer 
for information on the range of 
recommended equipment and 
accessories.
Installation of radio 
communication 
transmitters
Before installing any after-market radio 
communication transmitter, you can 
contact a CITROËN dealer for the 
specification of transmitters which can 
be fitted (frequency, maximum power, 
aerial position, specific installation 
requirements), in line with the Vehicle 
Electromagnetic Compatibility Directive 
(2004/104/EC).By visiting a CITROËN
  dealer, you can 
also obtain cleaning and maintenance 
products (interior and exterior), 
including the ecological products in 
the "TECHNATURE" range, products 
for topping up (screenwash fluid...), 
touch-up pens and paint aerosols the 
exact colour of your vehicle, recharges 
(cartridge for the temporary puncture 
repair kit...), ... Depending on the legislation in force in 
the country, certain safety equipment 
may be compulsory: high visibility 
safety vests, warning triangles, 
breathalyzers, spare bulbs, spare fuses, 
fire extinguisher, first aid kit, mud flaps 
at the rear of the vehicle.
11 
Practical information  
Page 203 of 296

201
The system is protected in such a way that it will only 
operate in your vehicle.
eMyWay
01 First steps - Control 
panel 
As a safety measure, the driver must only carry out 
operations which require prolonged attention while the 
vehicle is stationary.
When the engine is switched off and to prevent 
discharging of the battery, the system switches off 
following the activation of the energy economy mode.
CONTENTS
02
 
Steering mounted 
 controls 
03
 
General operation 
04
 
Navigation 
 - Guidance 
05
 
T
 raffic information 
06
 
Using 
 the telephone 
07
  Radio 
08
 
Music media players 
09
 
Audio 
 settings 
10
  Configuration 
11
 
Screen menu 
 maps  p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
 202
 204
 205
 207
 220
 223
 233
 236
 242
 243
 244
GPS navigation system
Multimedia audio system
Bluetooth
® telephone
Frequently asked questions  p.
 248  
Page 209 of 296

04
207
List of recent destinations.
"Navigation - guidance
"
To delete the list of recent destinations, select " Guidance 
options " in the navigation menu then select " Delete last 
destinations" and confirm. Select "Ye s " then confirm.
Deleting just one destination is not possible. Go from the list to the menu (left/right).
"Select destination"
"Journey leg and route
"
"Guidance options "
"Map management"
"Stop / Restore guidance "
Press N AV
.
orTo make full use of all of the 
functions of your navigation 
system, update the mapping 
regularly. Contact a 
CITROËN dealer or order 
your mapping update at 
http://citroen.navigation.com
A short press on the end of the 
lighting control stalk repeats 
the last navigation message.
NAVIGATION - GUIDANCE
Access to the "NAVIGATION" menu