sensor Citroen C3 RHD 2012 2.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2012, Model line: C3 RHD, Model: Citroen C3 RHD 2012 2.GPages: 252, PDF Size: 8.17 MB
Page 131 of 252

9
DRIVING
REAR PARKING SENSORS 
  System consisting of four proximity sen-
sors, located in the rear bumper. 
Activation
  This detects any obstacle (person, vehi-
cle, tree, gate, etc.) behind the vehicle, 
except obstacles located just below the 
bumper. 
  An object, such as a stake, a 
roadworks cone or any other 
similar object may be detected 
at the beginning of the manoeu-
vre, but may no longer be de-
tected when the vehicle comes 
close to it.    
The parking sensor system can-
not, in any circumstances, take 
the place of the vigilance and re-
sponsibility of the driver.     The system is activated as soon as re-
verse gear is engaged, accompanied 
by an audible signal. 
  On completion of the manoeuvre, when 
you exit reverse gear, the system be-
comes inactive.   The proximity information is given by: 
   
 
-  an audible signal, which becomes 
more rapid as the vehicle approaches 
the obstacle. 
   
-   a graphic (according to version) in 
the multifunction screen, with blocks 
which become increasingly closer to 
the vehicle.  
  When the distance between the rear of 
the vehicle and the obstacle is less than 
thirty centimetres, the audible signal 
becomes continuous and the "Danger" 
symbol appears in the multifunction 
screen.  
Page 132 of 252

9
130
DRIVING
  The system will be deactivated 
automatically when towing a 
trailer or when a bicycle carrier is 
fi tted (vehicle fi tted with a towbar 
or bicycle carrier recommended 
by CITROËN).    In bad or wintry weather, ensure 
that the sensors are not covered 
with mud, frost or snow.  
 
 
Programming
 
You can activate or deactivate the 
system by means of the multifunction 
screen confi guration menu. The system 
state is memorised when switching off 
the ignition. 
  For more information on access to 
the parking sensors menu, refer to 
"Confi guration/Vehicle parameters" in 
the "Multifunction screens" section cor-
responding to your screen. 
Operating faults 
  If there is an operating fault, 
when reverse gear is engaged 
this warning lamp comes on 
in the instrument panel, accompanied by 
an audible signal (short beep) and a mes-
sage in the multifunction screen.