clim Citroen C4 2005 2.G Workshop Manual

Downloaded from www.Manualslib.com manuals search engine 18
GENERAL
LUBRICANTS - TOTAL recommended oils
Use of oil grade 10W40.
It is possible to use the semi-synthetic oil 7000 10W40on HDi and HDi
FAP vehicles.
WARNING: To avoid difficulties when starting from cold
(< 20°C), use
5W40 oil.
For more details, see the oil usage table
(paragraph 3.3).
Commercial description for energy economy oil.
TOTAL ACTIVA FUTUR 9000 5W30
(France only).
TOTAL QUARTZ FUTUR 9000 5W30 (except France).
The exclusions for use of this oil are the following:
- XSARA VTS 2.0 16V (XU10J4RS).
- JUMPER/RELAY 2.8 HDi and 2.8 TDi (SOFIM engine).
- HDi FAP vehicles.
- CITROËN C3 HDi 16V (DV4TED4).
- CITROËN C8 2.2i (EW12J4).
- CITROËN C4 and C5 2.0i (EW10A).
- CITROËN C4 (EW10J4S).
Engine oil norms.
Current norms.
The classification of these engine oils is established by the following
recognised organisations:
- S.A.E : Society of Automotive Engineers.
- API: American Petroleum Institute.
- ACEA: Association des Constructeurs Européens d'Automobiles.S.A.E. Norms - Table for selection of engine oil grade.
Selection of engine oil grades recommended for climatic conditions in
countries of distribution
(see table, paragraph 3.3).
Evolution of the norms to 01/01/2003.
ACEA 2003 norms.
The meaning of the first letter has not changed, it still corresponds
to the type of engine:
A: petroland dual fuelpetrol / LPG engines.
B: dieselengines.
The figure following the first letter corresponds to the type of oil:
3:high performance oils.
4:oils specifically for direct injection diesel engines.
5:very high performance oils permitting lower fuel consumption, specific to
direct injection diesel engines.
Example:
- ACEA A3: high performance oils specifically for petrol and dual fuel petrol/
LPG engines.
- ACEA A/B: blended oils giving very high performance for all engines, also
permitting better fuel economy, specifically for direct injection diesel engines.
NOTE: From 01/01/2003there is no longer any reference to the year of
creation of the norm
(example : ACEA A3/B3 98becomes ACEA A3/B3).
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 18

Downloaded from www.Manualslib.com manuals search engine 20
GENERAL
LUBRICANTS - TOTAL recommended oils
Classes and grades of TOTAL recommended engine oils.
The oils distributed in each country are suited to the local climatic
conditions.
Blended oils for all engines
(petrol, diesel and dual fuel
petrol/LPG):
S.A.E. ACEA API
norms norms norms
TOTAL ACTIVA 9000 A3/B3/
TOTAL QUARTZ 90005W40
B4
TOTAL ACTIVA FUTUR 9000 (*)SL/CF
TOTAL QUARTZ FUTUR 9000 (*)5W30 A5/B5
TOTAL ACTIVRAC 10W40 A3/B3
(*) Blended oils for all engines giving fuel economy.
Oils for petrol, diesel and dual fuel petrol/LPG engines:
S.A.E. ACEA API
norms norms norms
TOTAL ACTIVA 7000
TOTAL QUARTZ 700010W40
TOTAL QUARTZ 9000 0W40 A3 SL
TOTAL ACTIVA 7000
TOTAL QUARTZ 700015W50Oils specifically for diesel engines:
S.A.E. ACEA API
norms norms norms
TOTAL ACTIVA DIESEL 7000
TOTAL QUARTZ DIESEL 700010W40
B3 CF
TOTAL ACTIVA DIESEL 7000 15W50
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 20

Downloaded from www.Manualslib.com manuals search engine 21
GENERAL
LUBRICANTS - TOTAL recommended oils
TOTAL ACTIVA QUARTZ
Semi-synthetic 7000 Synthetic 9000
0W40 5W30 5W40 10W40 15W50
Hot countries
Temperate countries
Cold countries Engine types
EW10J4S (CITROËN C4) X
X
X EW12J4 (CITROËN C8 2.2i 16V)
EW10A (CITROËN C4 and C5)
HDi engines with FAP (*)
Others HDi engines
SOFIM 2.8 HDi and 2.8 TDi (RELAY)
DV4 TED4 (C3 1.6 16V HDi)
Indirect injection diesel engines Petrol engines
Diesel enginesOil usage table
X
X
XX
XX
X
XX
X
XX
X
X (*)
X
XX
X
XX
X
XX
X
XX
(*) Do not use this oil in cold climatic conditions
(temperature less than - 20°C).
See the table below for the choice of TOTALengine oil grades to be used according to the climatic conditions in the country of marketing.X Others petrol engines
X
X
X
X
X
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 21

Downloaded from www.Manualslib.com manuals search engine AIR
CONDITIONING
437
CHECKING THE EFFICIENCY OF THE AIR CONDITIONING SYSTEM
Outillage EXXOTest
Outillage
(flash équipement & matériel).Exxoclim : 2.4.2-1
Mode d’emploi : Voir notice constructeur
Procédure de l’essai.
Contrôle.
Mettre en place l'outillage
(selon notice du constructeur).
Opérations préliminaires.
Fermer tous les aérateurs frontaux.
Démarrer le moteur.
Ouvrir l'aérateur frontal gauche.
Positionner la commande du répartiteur d'air sur«débit frontal».
Activer la commande«recirculation d'air».
Activer la commande"AIR
CONDITIONING ".
Position des commandes de AIR
CONDITIONING :
- Commande de température sur froid maxi.
- Commande de pulseur en position vitesse maximum.
Laisser la AIR
E5AP2N5D
Outillage VALEO
Outillage.
Clim test 2 : 4372-T
E5AP2N4D
Angl.-t2-page428-456-2005 9/01/06 10:25 Page 437

Downloaded from www.Manualslib.com manuals search engine AIR
CONDITIONING
438
Tools.
[1] Clim test 2 VALEO: 4372-T
Checks.
Position the tool [1]
(depending on manufacturer's instructions).
CHECKING THE EFFICIENCY OF THE AIR CONDITIONING SYSTEM
E5AP2ECC
Angl.-t2-page428-456-2005 9/01/06 10:25 Page 438

Downloaded from www.Manualslib.com manuals search engine 439
Checking.
Position the toolCLIM TEST II
(according to the manufacturer's instructions).
Preliminary operations.
Close all the front air vents.
Start the engine.
Open the front LH air vent.
Position the air distribution control to«frontal flow».
Activate the«air recirculation» control.
Activate the«air conditioning» control.
Positions of the air conditioning controls:
- Temperature control on maximum cold.
- Blower control in maximum speed position.
Let the air conditioning operate for5 minutes.
CHECKING THE EFFICIENCY OF THE AIR CONDITIONING SYSTEM
E5AP2FAC
Angl.-t2-page428-456-2005 9/01/06 10:25 Page 439