hydraulic Citroen C4 2005 2.G Workshop Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2005, Model line: C4, Model: Citroen C4 2005 2.GPages: 462, PDF Size: 10.48 MB
Page 6 of 462
Downloaded from www.Manualslib.com manuals search engine CLUTCH - GEARBOX - TRANSMISSION (continued)
Gearbox specifications312 - 314
Clutch specifications315 - 316
Checking and adjusting the hydraulic
clutch control317 - 318
Tightening torques: manual gearbox
319 - 330
Manual gearbox controls
331 - 343
Recommendations - precautions:
automatic gearbox344 - 346
Tightening torques: manual gearbox
347 - 349
Automatic gearbox controls
350 - 359
Driveshafts360
AXLES - SUSPENSION - STEERING
Axle geometry: C4361 - 364
Tightening torques: front axle365 - 366
Tightening torques: rear axle367
Tightening torques: power steering368 - 369
Setting the steering rack mid-point370
Checking the power steering pressure371 - 374
Axle geometry: Xsara375 - 379Adjusting the handbrake 426
Filling, bleeding the brakes427
AIR CONDITIONING
R134.a: quantities428
Checking the compressor lubricant429 - 430
Pollen filter: all types431 - 433
Filtering and drying cartridge434 - 436
Checking the efficiency of the circuit437 - 446
C4447 - 451
Xsara452
Xsara picasso453 - 456
CONTENTS
Tightening torques: front axle380
Tightening torques: rear axle382
Tightening torques: steering 383 - 384
Tightening torques: power steering385 - 387
Axle geometry: Xsara Picasso388 - 392
Tightening torques: front axle393
Tightening torques: rear axle394
Tightening torques: power steering395 - 397
BRAKES
Brake specifications: C4398 - 399
Tightening torques: Brakes401 - 403
Adjusting the handbrake 405
Filling, bleeding the brakes406 - 410
Brake specifications: Xsara411
Tightening torques 414
Brake specifications415 - 418
Adjusting the handbrake 419
Filling, bleeding the brakes420
Brake specifications: Xsara Picasso421 - 422
Brake specifications423 - 424
Aircon circuit
Angl-t2-Index-2005 9/01/06 10:05 Page IV
Page 19 of 462
Downloaded from www.Manualslib.com manuals search engine 13
GENERAL
Engine type
Engine with filter element
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After draining
Hydraulic or brake circuit
Cooling circuit
Fuel tankKFW NFU RFN
3 3,25 4,25
1,5 1,5 1,7
21,9
66
33
With ABS = 0,50 Without ABS = 0,55
7
6,5
6,5 (1)
54
XSARA
CAPACITIES (in litres)
Petrol
ESSENTIAL: Systematically check the oil level using the oil dipstick.
1.4i 1.6i 16V 2.0i 16V
AUTO.AUTO.
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 13
Page 20 of 462
Downloaded from www.Manualslib.com manuals search engine 14
GENERAL
Engine type
Engine with filter element
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After draining
Hydraulic or brake circuit
Cooling circuit
Fuel tank8HX 8HZ 8HX 8HZ 8HY WJY WJY RHY RHZ
3,75 4,5 3,75 4,5
1,8 1,5 1,8 1,5 1,2 1,8 1,4
2 1,8
8,3
5,3
With ABS = 0,50 Without ABS = 0,55
5,7 9 8,5
54
XSARA
CAPACITIES (in litres)
Diesel
(1) =➔RPO 9337 (manual dipstick with two twists).
(2) = RPO 9338 ➔(manual dipstick without twists but with a sphere).
ESSENTIAL: Systematically check the oil level using the oil dipstick.
1.4 HDi 1.4 16V HDi 1.9D
AUTO.
2.0 HDi
➔ RPO RPO➔ RPO RPO
9884 9885 ➔9884 9885 ➔(1) (2)
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 14
Page 21 of 462
Downloaded from www.Manualslib.com manuals search engine 15
GENERAL
Engine type
Engine with filter element filtrante
Between Min. and Max.
5-speed gearbox
Automatic gearbox
After draining
Hydraulic or brake circuit
Cooling circuit
Fuel tank capacity
NFV 6FZ RFN 9HZ 9HY RHY
3 4,25 3,75 4,5
1,5 1,7 1,55 (3) 1,4
1,81,8
6
3
0,58 litres
5,8 (1) and (2) 6,5 (1) and (2) 11 11 (1) and (2)
55 60
XSARA PICASSO CAPACITIES (in litres)
Diesel Petrol
1.6i1.8i 16 V 2.0i 16V 1.6 16V HDi
(1) = With air conditioning.
(2) = Without air conditioning.
(3) = RPO 9884 ➔ = Restyled XSARA PICASSO.
ESSENTIAL: Systematically check the oil level using the oil dipstick.
AUTO.
2.0 HDi
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 15
Page 22 of 462
Downloaded from www.Manualslib.com manuals search engine 16
GENERALEngine type
Engine with filter element
Between Min. and Max.
5-speed gearbox
Hydraulic or brake circuit
Cooling circuit
Fuel tank capacity
HFX KFW NFU 9HX WJY RHY
3 3,25 3,75 4,5
1,5 1,55 1,2 1,4
2 1,8
With ABS = 0,45 - Without ABS = 0,36
89
55 60
BERLINGO CAPACITIES (in litres)
Diesel Petrol
1.1i 1.4i1.6i 16V
2.0 HDi
1.9 D
(1)
(1) = Manual dipstick without twists but with a sphere.
ESSENTIAL: Systematically check the oil level using the oil dipstick.
1.4i 16V HDi
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 16
Page 43 of 462
Downloaded from www.Manualslib.com manuals search engine 37
GENERAL
LUBRICANTS - TOTAL recommended oils
BRAKE FLUID
Synthetic brake fluid
HYDRAULIC SYSTEM
WARNING: TOTAL FLUIDE LDS fluid cannot be blended withTOTAL LHM PLUS.
WARNING: CITROËN C5: Use exclusively TOTAL FLUIDE LDS suspension fluid.
All countriesTOTAL HYDRAURINCAGE
All countriesCITROËN fluid0,5Litre
1 Litre
5 Litres9979 05
9979 06
9979 07 PacksCITROËN Part No.
PacksCITROËN Part No.
Norm
Colour All countries
TOTAL FLUIDE LDS
TOTAL LHM PLUS
TOTAL LHM PLUS
Very cold countriesOrange 9979 A3
9979 A1
9979 A2 Green1 Litre
Angl.-t2-page001-39-2005 9/01/06 10:07 Page 37
Page 288 of 462
Downloaded from www.Manualslib.com manuals search engine 282
ENGINEVALVE CLEARANCE SETTINGS
The valve clearances must be checked with the engine cold.
●Inlet
TU1JP - TU3JP
(except TU5JP4)
WJY
TU5JP4
DV4/DV6/EW10
All typesExhaust
Hydraulic adjustment 0,15 mm ± 0,08
0,30mm ± 0,08
Rocking
Adjust
1 ●1
3 ●3
4 ●4
2 ●24 ●4
2 ●2
1 ●1
3 ●3
Exhaust
●
Inlet Rocking
Valves
fully
openAdjust
1
3
4
23 ●4
4 ●2
2 ●1
1 ●3
Fully open (exhaust) POSSIBLE PROCEDURES
For engines with 4 cylinders in a line (1-3-4-2 )
Engines without hydraulic
adjustment: the clearance (J)
should be checked opposite
the cam.
B1DP13QC
0,20 mm ± 0,05
0,40 mm ± 0,05
Angl.-t2-page240-282-2005 9/01/06 10:16 Page 282
Page 321 of 462
Downloaded from www.Manualslib.com manuals search engine 315
CLUTCH
GEARBOX
TRANSMISSION
CLUTCH SPECIFICATIONS
Engines: KFU - NFU - RFN - RFJ - RFK - 9HX - 9HY - 9HZ - RHR
NOTE:All the clutches are «push»type with hydraulic control.
NOTE:The DV6TED4and DW10BTED4engines are equipped with a double damping flywheel (DVA).
Description.
The declutch control has a declutch fork with a ball-joint on the axis.
(1)The ball-joint is screwed into the clutch casing
(2) Declutch fork
(3)Clutch casing
(4)Bearing
(5) Clutch plate
The clutch control slave cylinder(7)is fixed by two screws (6) into the exterior of the clutch casing.
B2BP047C
B2CP3FAC
C4
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 315
Page 322 of 462
Downloaded from www.Manualslib.com manuals search engine 316
CLUTCH
GEARBOX
TRANSMISSION
CLUTCH SPECIFICATIONS
Engines: KFW - NFU - NFV - 6FZ - RFN - 8HX - 8HZ - 9HY - 9HZ - WJY - RHY - RHZ
NOTE:All the clutches are «push»type with hydraulic control.
Description.
The declutch control has a declutch fork mounted on a ball-joint.
(1)The ball-joint is screwed into the clutch casing
(2)Declutch fork
(3)Clutch casing
(4)Bearing
(5)Clutch plate
The clutch control slave cylinder (7)is fixed by two screws (6)onto the exterior of the clutch casing.
T
ightening torques (m.daN).
Fixing of clutch plate/engine flywheel: 2 ± 0,2.
Fixing of clutch control slave cylinder / clutch housing: 2 ± 0,25.
Fixing of engine flywheel/crankshaft
Pre-tightening: 1,75 ± 0,2.
Angular tightening: 75° ± 5°.
Checking torque: 6,3 ± 2,2.
B2BP047CB2BP05SC
XSARA - XSARA PICASSO
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 316
Page 323 of 462
Downloaded from www.Manualslib.com manuals search engine 317
CLUTCH
GEARBOX
TRANSMISSION
HYDRAULIC CLUTCH CONTROL: CHECKS AND ADJUSTMENTS
B2BP04XC
IMPERATIVE: Use only new brake brake fluid that is not emulsified, avoid any
ingress of impurities into the hydraulic circuit.
IMPERATIVE: Do not use automatic bleeding equipment
(risk of the brake fluid
emulsifying in the hydraulic circuit).
Couple a transparent tube (5)on the bleed screw, at «c».
Submerge the end of the tube (5)in the recipient containing the brake fluid, located
below the level of the clutch slave cylinder.
Use the transparent tube (5) to act as a siphon, at «b».
WARNING: the end of the tube (5) must be submerged in the brake fluid.
Open the bleed screw at «c».
XSARA PICASSO
Bleeding the hydraulic clutch control
Angl.-t2-page306-360-2005 9/01/06 10:20 Page 317