display Citroen C4 2009 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009, Model line: C4, Model: Citroen C4 2009 1.GPages: 279, PDF Size: 12.3 MB
Page 22 of 279
37
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
S y s t e m w h i c h p r o v i d e s c u r r e n t
i n f o r m a t i o n c o n c e r n i n g t h e r o u t e
t r a v e l l e d ( r a n g e , c o n s u m p t i o n . . . ) .
Monochrome screen A Data displays
P r e s s t h e c o n t r o l f o r m o r e t h a n
t w o s e c o n d s t o r e s e t t o z e r o t h e
d i s t a n c e t r a v e l l e d , t h e a v e r a g e
c o n s u m p t i o n a n d t h e a v e r a g e
s p e e d .
Zero reset
T h e t r i p c o m p u t e r p r o v i d e s t h e f o l l o w i n g
i n f o r m a t i o n :
- range,
- c u r r e n t c o n s u m p t i o n ,
- d i s t a n c e t r a v e l l e d ,
- a v e r a g e c o n s u m p t i o n ,
- a v e r a g e s p e e d .
The next press then returns you
t o t h e n o r m a l d i s p l a y .
P r e s s t h e b u t t o n , l o c a t e d a t t h e
end of the wiper
stalk , to display
t h e v a r i o u s i t e m s o f t r i p c o m p u t e r
d a t a i n s u c c e s s i o n .
Page 23 of 279
38
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
S y s t e m w h i c h p r o v i d e s c u r r e n t i n f o r -
m a t i o n c o n c e r n i n g t h e r o u t e t r a v e l l e d
( r a n g e , c o n s u m p t i o n , … ) .
Monochrome screen C
N a v i D r i v e c o l o u r s c r e e n D i s p l a y o f i n f o r m a t i o n
Trip zero reset
P r e s s t h e b u t t o n , l o c a t e d a t t h e
end of the wiper stalk , to display
t h e v a r i o u s t r i p c o m p u t e r i n f o r -
m a t i o n g r o u p s i n s u c c e s s i o n :
- t h e c u r r e n t i n f o r m a t i o n g r o u p w i t h :
Page 25 of 279
38
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
S y s t e m w h i c h p r o v i d e s c u r r e n t i n f o r -
m a t i o n c o n c e r n i n g t h e r o u t e t r a v e l l e d
( r a n g e , c o n s u m p t i o n , … ) .
Monochrome screen C
N a v i D r i v e c o l o u r s c r e e n D i s p l a y o f i n f o r m a t i o n
Trip zero reset
P r e s s t h e b u t t o n , l o c a t e d a t t h e
end of the wiper stalk , to display
t h e v a r i o u s t r i p c o m p u t e r i n f o r -
m a t i o n g r o u p s i n s u c c e s s i o n :
- t h e c u r r e n t i n f o r m a t i o n g r o u p w i t h :
Page 32 of 279
45
III
C O M F O R T
AUTOMATIC AIR CONDITIONING 1 - A u t o m a t i c o p e r a t i o n
This system automatically regulates
t e m p e r a t u r e , a i r fl o w a n d a i r d i s t r i b u -
tion in the passenger compartment
according to the temperature selected
(for each side, right and left).
It provides an optimum level of comfort
regardless of the climatic conditions,
b y p e r m a n e n t u s e of the automatic
air conditioning mode (press the AUTO
button ) and with a l l t h e v e n t s o p e n .
H a v i n g n o a i r fl o w p r e v e n t s t h e a i r c o n -
ditioning and the system in general
from working.
T o p r e v e n t m i s t i n g o f t h e i n t e r i o r
o f t h e v e h i c l e i n c o l d a n d d a m p
c o n d i t i o n s , t h e u s e o f A U T O
mode is recommended. 2 - Adjustment of
t e m p e r a t u r e o n l e f t
h a n d s i d e
To set and display the de-
sired temperature, rotate
control 2 or 3 :
The display HI (high) corre-
sponds to a demand for maxi-
mum heating (above 27).
The display LO (low) cor-
responds to a demand for
maximum air conditioning
(below 15).
3 - Adjustment of
t e m p e r a t u r e o n r i g h t
h a n d s i d e
- To the left to lower the tempera- ture
- To the right to raise the tempera- ture
The difference between the tempera-
tures on the right and on the left can-
not be greater than 3 degrees.
A setting around 21 will provide a tem-
perature that is comfortable. Depending
on your requirements, an adjustment
between 18 and 24 is normal.
A press on this control,
c o n fi r m e d b y t h e d i s p l a y o f
"A/C" and "AUTO" , auto-
matically manages all the
5 following functions according to
the temperature chosen:
- Flow of air.
- Cabin temperature.
- Distribution of air.
- Air conditioning.
- Recycling of air.
To enable the system to operate, all
the air vents should be kept open. This is the normal operating
mode.
Page 33 of 279
46
III
C O M F O R T
When you enter the vehicle, the
temperature inside the vehicle may
be much colder (or warmer) than a
comfortable temperature. There is
no point in modifying the displayed
temperature to try to attain the de-
sired level of comfort. The system
operates automatically to compen-
sate this temperature discrepancy
as rapidly as possible.
When starting the engine from
cold, in order to avoid distributing
too much cold air, the blower will
attain its optimum level gradually.
M a n u a l o p e r a t i o n o f o n e o r m o r e
functions
Each of the functions 4 , 6 and 7 can
be adjusted manually.
Display of the "AUTO" function then
disappears.
Central and lateral air
vents.
Central and lateral air
v e n t s a n d p a s s e n g e r
f o o t w e l l s .
P a s s e n g e r f o o t w e l l s .
T h e w i n d s c r e e n , f r o n t
s i d e w i n d o w s a n d
p a s s e n g e r f o o t w e l l s .
T h e w i n d s c r e e n a n d
f r o n t s i d e w i n d o w s .
4 - Air conditioning
6 - A d j u s t m e n t o f t h e a i r
distribution
5 - Air recirculation To stop the air conditioning,
press on the control
4 . The
symbol "A/C" disappears. To
restart it, press again on the
control 4 . The symbol "A/C"
displays.
When you press on control 5 ,
the entry of air from outside is
blocked off and the associated
symbol is displayed.
This function can also be accessed
by pressing the appropriate button
on the steering wheel.
While retaining the other settings,
this position excludes disagreeable
odours or emissions coming from
outside. It should be cancelled as
soon as possible to prevent misting
and to allow fresh air into the cabin.
To deactivate the air recirculation,
press again on control 5 . Press the button
6 succes-
sively so that the multifunction
screen shows, in turn, the air
fl o w t o :
Page 60 of 279
70
V I S I B I L I T Y
LIGHTING CONTROLS
System for selection and control of
the various front and rear lamps pro-
viding the vehicle's lighting.
Main lighting
The various front and rear lamps of
the vehicle are designed to adapt
the driver's visibility progressively in
relation to the climatic conditions:
- sidelamps, to be seen,
- dipped headlamps to see without dazzling other drivers,
- main beam headlamps to see clearly when the road is clear,
- directional headlamps for im- proved visibility when cornering.
Additional lighting
O t h e r l a m p s a r e fi t t e d t o f u l fi l t h e
requirements of particular driving
conditions:
- a rear foglamp to be seen from a distance,
- front foglamps for even better forward vision,
- daytime running lamps to be seen during the day. Programming
Various automatic lighting control
modes are also available depending
on options:
- guide-me-home lighting,
- automatic lighting,
- directional lighting.
Manual controls
lamps off,
automatic switching on of
the lamps,
sidelamps only,
dipped headlamps or
main beam headlamps.
B. Stalk for switching headlamps by
pulling: dipped headlamps/main
beam headlamps.
In the lamps off and sidelamps
modes, the driver can switch on the
main beam headlamps temporarily
( " h e a d l a m p fl a s h " ) b y m a i n t a i n i n g a
pull on the stalk.
Displays
Lighting of the corresponding indi-
cator lamp on the instrument panel
c o n fi r m s t h e s e l e c t i v e s w i t c h i n g o n
of the lighting selected.
The lighting commands are issued
directly by the driver by means of
the ring
A and the stalk B .
A. Main lighting mode selection ring,
with:
Page 66 of 279
74
V I S I B I L I T Y
V
AUTOMATIC ADJUSTMENT OF THE XENON HEADLAMPS
In order to avoid causing a nuisance
to other road users, this system cor-
rects the height of the xenon head-
lamps beam automatically and when
stationary, in relation to the load in
the vehicle. If a malfunction occurs,
this warning lamp is
displayed on the in-
strument panel, ac-
companied by an audible signal and a
message on the multifunction screen.
The system then places your head-
lamps in the lowest position.
If a malfunction occurs, do not
touch the xenon bulbs. Contact a
CITROËN dealer.
DIRECTIONAL LIGHTING
When the dipped or main beam
headlamps are on, this function ena-
bles the light beam to follow the di-
rection of the road.
The use of this function, coupled
with the xenon headlamps only,
considerably improves the quality of
your lighting when cornering.
with directional lighting
without directional lighting Programming
The function is activat-
ed or deactivated via
the multifunction screen
c o n fi g u r a t i o n m e n u .
Operating fault If a malfunction occurs, this
w a r n i n g l a m p fl a s h e s o n t h e
instrument panel, accompa-
nied by a message on the
multifunction screen.
Consult a CITROËN dealer.
When stationary or moving at very
low speed or when reverse gear is
engaged, the system is inactive.
The status of the system remains
in the memory when the ignition is
switched off.
O n v e h i c l e s fi t t e d w i t h d a y t i m e r u n -
ning lights, the function is activated
if the lighting stalk is in the "AUTO"
or "Dipped/main beam head-
lamps" position. In position "0" , the
function is not activated.
Page 74 of 279
81
VI
F I T T I N G S
PORTABLE ASHTRAY
Pull the cover to open the ashtray.
T o e m p t y i t , r e m o v e t h e a s h t r a y
by pulling it upwards.
LIGHTER/12 V ACCESSORIES SOCKET
T o u s e t h e l i g h t e r , p r e s s i t i n a n d
wait a few seconds until it pops
out automatically.
To connect a 12 V accessory
( m a x p o w e r : 1 2 0 W a t t s ) , c o n n e c t
a suitable adaptor to the socket
on the centre console.
Operates with the ignition on.
USB BOX
T h i s c o n n e c t i o n b o x , c o n s i s t i n g o f
a J A C K s o c k e t a n d a U S B p o r t , i s
located on the centre console.
It permits the connection of portable
e q u i p m e n t , s u c h a s a d i g i t a l a u d i o
player of the iPod ®
or USB stick type.
I t r e a d s t h e a u d i o fi l e f o r m a t s w h i c h
are transmitted to your audio equip-
ment and played via the vehicle's
speakers.
Y o u c a n m a n a g e t h e s e fi l e s u s i n g
the steering wheel controls or the
audio equipment control panel and
display them on the multifunction
screen.
W h e n i t i s i n u s e , t h e p o r t a b l e e q u i p -
ment charges automatically.
For further details concerning the
u s e o f t h i s e q u i p m e n t , r e f e r t o t h e
"Audio and Telematics" section.
Page 80 of 279
81
VI
F I T T I N G S
PORTABLE ASHTRAY
Pull the cover to open the ashtray.
T o e m p t y i t , r e m o v e t h e a s h t r a y
by pulling it upwards.
LIGHTER/12 V ACCESSORIES SOCKET
T o u s e t h e l i g h t e r , p r e s s i t i n a n d
wait a few seconds until it pops
out automatically.
To connect a 12 V accessory
( m a x p o w e r : 1 2 0 W a t t s ) , c o n n e c t
a suitable adaptor to the socket
on the centre console.
Operates with the ignition on.
USB BOX
T h i s c o n n e c t i o n b o x , c o n s i s t i n g o f
a J A C K s o c k e t a n d a U S B p o r t , i s
located on the centre console.
It permits the connection of portable
e q u i p m e n t , s u c h a s a d i g i t a l a u d i o
player of the iPod ®
or USB stick type.
I t r e a d s t h e a u d i o fi l e f o r m a t s w h i c h
are transmitted to your audio equip-
ment and played via the vehicle's
speakers.
Y o u c a n m a n a g e t h e s e fi l e s u s i n g
the steering wheel controls or the
audio equipment control panel and
display them on the multifunction
screen.
W h e n i t i s i n u s e , t h e p o r t a b l e e q u i p -
ment charges automatically.
For further details concerning the
u s e o f t h i s e q u i p m e n t , r e f e r t o t h e
"Audio and Telematics" section.
Page 99 of 279
96
VIII
S A F E T Y
TYRE UNDER-INFLATION DETECTION
S e n s o r s fi t t e d i n e a c h v a l v e c h e c k
the tyre pressure during driving and
trigger a warning in the event of
malfunction (speed above 12 mph
(20 km/h)).
Flat tyre T h e t y r e u n d e r - i n fl a t i o n d e t e c t i o n
system is an aid to driving which
does not replace the vigilance or
responsibility of the driver. Puncture
The service warning lamp
comes on in the instru-
ment panel, accompanied
by an audible signal and
a message on the multi-
function screen locating
the wheel concerned.
Check the tyre pressures as soon as
possible. This check must be carried
out when the tyres are cold. The
STOP warning lamp
comes on in the instru-
ment panel, accompanied
by an audible signal and
a message on the multi-
function screen locating
the wheel concerned.
Stop immediately, avoiding any sud-
den movement of the steering wheel
and the brakes.
Change the damaged wheel (punc-
t u r e d o r v e r y d e fl a t e d t y r e ) , a n d
have the tyre pressure checked as
soon as possible.
Sensor(s) not detected or faulty
The service warning
lamp comes on in the
instrument panel, ac-
companied by an audible
signal and a message on
the multifunction screen
locating the wheel or wheels which
are not detected or indicating a fault
in the system.
Have the faulty sensor(s) checked
by a CITROËN dealer. All repairs and changing of tyres
o n a w h e e l fi t t e d w i t h t h i s s y s t e m
must be carried out by a CITROËN
dealer.
If, when changing a tyre, you in-
stall a wheel which is not detected
b y y o u r v e h i c l e ( e x a m p l e : fi t t i n g
of snow tyres), you must have the
system reinitialised by a CITROËN
dealer.
This system does not eliminate
the need to have the tyre pres-
sure checked regularly (refer to the
" T e c h n i c a l d a t a - § I d e n t i fi c a t i o n
markings" section) to ensure that
the optimum dynamic performance
of the vehicle is maintained and
prevent premature wear of the
tyres, particularly in arduous driv-
ing conditions (heavy load, high
speed).
The tyre pressures must be
checked cold, at least once a
month. Remember to check the
pressure of the spare wheel.
T h e t y r e u n d e r - i n fl a t i o n d e t e c t i o n
s y s t e m m a y e x p e r i e n c e t e m p o r a r y
interference due to radio-electric
emissions on a frequency close to
that used by the system.
This message is also displayed
when one of the wheels is away
from the vehicle (being repaired) or
when one or more wheels without a
s e n s o r a r e fi t t e d .
T h e s p a r e w h e e l i s n o t fi t t e d w i t h a
sensor.