fuse diagram Citroen C4 2012 2.G Owner's Manual

11
PRACTICAL INFORMATION
203




















CHANGING A FUSE

Access to the tools

The extraction tweezer is attached to
the back of the dashboard fusebox
cover.
For access to it:


)
unclip the cover by pulling at the
top right, then left

)
disengage the cover completely
and turn it over,

)
remove the carrier, on the back of
which the tweezer is fi tted.



Changing a fuse

Before changing a fuse:


)
the cause of the failure must be
identifi ed and rectifi ed,

)
all electrical consumers must be
switched off,

)
the vehicle must be immobilised
with the ignition off,

)
identify the failed fuse using the ta-
bles and diagrams in the following
pages.
Good

Failed

To replace a fuse, you must:


)
use the special tweezer to extract
the fuse from its housing and check
the condition of its fi lament.

)
always replace the failed fuse with
a fuse of the same rating (same co-
lour); the use of a fuse of different
rating fuse may cause malfunctions
(risk of fi re).
If the fault recurrs soon after replacing the
fuse, have the electrical system checked
by a CITROËN dealer or a qualifi ed work-
shop.
Installing electrical
accessories
Your vehicle's electrical system
is designed to operate with stan-
dard or optional equipment.
Before installing other electrical
equipment or accessories on
your vehicle, contact a CITROËN
dealer or a qualifi ed workshop.
CITROËN will not accept respon-
sibility for the cost incurred in
repairing your vehicle or for recti-
fying malfunctions resulting from
the installation of accessories not
supplied and not recommended
by CITROËN and not installed in
accordance with its instructions,
in particular when the combined
consumption of all of the addition-
al equipment connected exceeds
10 milliamperes.
The replacement of a fuse not
mentioned in the tables below
may cause a serious malfunc-
tion of your vehicle. Contact a
CITROËN dealer or a qualifi ed
workshop.
Tweezer