display Citroen C4 2014.5 2.G Owner's Manual

04
365
AUDIO
CD, USB
Information and adviceOn   a   single   disc,   the   CD   player   can   read   up   to   255   MP3   files   spread  
over

  8   directory   levels.   However,   it   is   recommended   that   this   be   kept  
to

  2   levels   so   as   to   limit   the   time   taken   to   access   and   play   the   CD.
During
  play,   the   folder   structure   is   not   observed.
In
  order   to   be   able   to   play   a   recorded   CDR   or   CDRW,   when   recording  
it

  is   preferable   to   select   standards   ISO   9660   level   1.2   or   Joliet.
If
  the   disc   is   recorded   in   another   format,   it   may   not   be   played   correctly.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.
Do

  not   connect   a   hard   disk   or   USB   device   other   than   audio   players   to  
the

  USB   port.  
This
  may   cause   damage   to   your   installation.
The
  audio   system   will   only   play   files   with   extension   ".mp3"   or   ".wma"  
and

  a   compression   rate   that   is   constant   or   variable   between   32   Kbps  
and

  320   Kbps.
It
  is   advisable   to   restrict   file   names   to   20   characters   without   using  
special

  characters   (e.g.   "   ? ;   ù)   to   avoid   any   playing   or   displaying  
problems.
The

  playlists   accepted   are   types   .m3u   and   .pls.
The
  number   of   files   is   limited   to   5   000   in   500   directories   on   a  
maximum

  of   8   levels.

04
366
CD, USB
AUDIO
Playing a compilationInsert   an   MP3   compilation   in   the   CD   player   or  
connect

  a   memory   stick   to   the   USB   port,   directly   or  
via

  an   extension   lead.
The
  system   creates   playlists   (temporary   memory)   the   creation   time  
for

  which   can   take   from   a   few   seconds   to   several   minutes.
The
  playlists   are   updated   every   time   the   ignition   is   switched   off   or   a  
USB

  memory   stick   is   connected.
Play
  starts   automatically   after   a   period   which   depends   on   the  
capacity

  of   the   USB   memory   stick.
Use
  only   USB   memory   sticks   formatted   FAT32   (File  
Allocation
 
T

able). At
  a   first   connection,   the   order   suggested   is   by   folder.  
When

  connecting   again,   the   order   previously   chosen   is  
retained.T

o   play   a   disc   or   memory   stick  
which

  has   already   been   inserted,  
press

SOURCE or SRC   several   times   in  
succession

  and   select   "CD" or "USB". Press one of the buttons to select the
next
  or   previous   track.
Press one of the buttons to select the
next
  or   previous   folder   in   the   order  
chosen.
Press

  and   hold   one   of   the   buttons   for  
fast

  forwards   or   backwards.
Press LIST
 

to   display   the   menu   of  
folders

  in   the   compilation.

04
367
Select
 
a
 
line
 
in
 
the
 
list.
Select
 
a
 
track
 
or
 
a
 
folder.
Skip
 
a
 
track.
Up
 
a
 
level
 
in
 
the
 
menu.
AUDIO
USB memory stick - File sorting
Having selected the desired sorting ("
By folders", "By artists", "By genres",
"By
playlists") press OK.
Then
  confirm   OK   to   save   the   modifications.
-
 
By folders
:   all   folders   containing   audio  
files

  recognised   on   the   peripheral   device,  
in

  alphabetical   order   without   following   the  
folder

  structure.
-
 
By artists :

  all   of   the   artist   names   defined  
in

  the   ID3  
T
ags,   in   alphabetical   order.
-
 
By genres
:   all   of   the   genres   defined   in   the  
ID3

 
T
ags.
-
 
By playlists
:   if   playlists   have   been   saved.
Make
  a   long   press   on  
LIST or press
MENU
, select "Multimedia", then
"Media parameters "   and   finally   "
Choice
of track listing "   to   display   the   different  
types

  of   sorting.

04
369
AUDIO
Auxiliary socket (AUX)
Auxiliary Jack socket
Do  not   connect   a   device   to   the   USB   port   and   to   the   auxiliary   Jack  
socket

  at   the   same   time.
The
  auxiliary   Jack   socket   permits   the   connection   of   a   portable  

non-mass

  storage   device   or   an  
Apple® player if not recognised by the
 
USB
 
port.
Connect
 
the
 
portable
 
device
 
to
 
the
 
auxiliary   Jack   socket   using   a  
suitable

 
cable
 
(not
 
supplied). Press the SOURCE or SRC button
several
  times   in   succession   and  
select

"AUX".
First
  adjust   the   volume   on   your   portable   device.
Then
  adjust   the   volume   of   the   audio  
system.
The

  display   and   management   of   controls   is   on   the  
portable

  device.

04
370
AUDIO
Streaming - Playing audio files via
Bluetooth
Depending on the compatibility of the phonePair/connect   the   telephone:   see   the   "USING  
THE
 
TELEPHONE"

  section.
Streaming
  allows   music   files   on   a   telephone   to   be   heard   via   the  
vehicle's

  speakers.
The
  telephone   must   support   the   appropriate   bluetooth   profiles  
(Profiles

 
A2DP 
/  
A
VRCP).
Activate
  the   streaming   source   by   pressing  
SOURCE
or
SRC.
  Control   of   playback   is   via   the   audio   system.  
The
 
contextual

  information   can   be   displayed   in   the   screen.
In
  certain   cases,   playing   of   the   audio   files   must   be   initiated   from   the  
telephone.
The

  audio   quality   depends   on   the   quality   of   the   transmission   from  
the

  telephone.
Play mode
The play modes available are:
-  
Normal:
  the   tracks   are   played   in   order,   depending   on   the  
classification

  of   the   selected   files.
-
 
Random:
  the   tracks   in   an   album   or   folder   are   played   in   a  
random

  order.
-
 
Random
  all:   all   of   the   tracks   saved   in   the   media   are   played   in  
random

  order.
-
 
Repeat:
  the   tracks   played   are   only   those   from   the   current  
album

  or   folder.
Press OK
  for   access   to   the   contextual  
menu.
or
Press

MENU.
Select "Multimedia"
  and   confirm.
Select "Media parameters "
  and  
confirm.
Select "

Read mode"   and   confirm.
Select
  the   desired   play   mode   and  
confirm

  OK   to   save   the   modifications.

05
371
USING THE TELEPHONE
Pairing a telephone
First connection
The services offered depend on the network, the SIM card and the compatibility of the Bluetooth telephone used.
Consult   your   telephone's   manual   and   your   operator   to   find   out   which   services   are   available   to   you.
Activate
  the   telephone's   Bluetooth   function   and  
ensure that

it is "visible to all" (refer to the telephone
user
  guide). Press MENU. A
 

window   is   displayed   "Search in progress…".
Select
  the   telephone   to   be   connected  
from

  the   list.   Only   one   telephone   can  
be

  connected   at   a   time.
Select "Search for a device".
For
  safety   reasons   and   because   they   require   prolonged   attention   on   the   part   of   the   driver,   the   operations   for   pairing   of   the   Bluetooth   mobile  
telephone

  with   the   Bluetooth   hands-free   system   of   your   audio   system   must   be   carried   out   with   the  
vehicle stationary
  and   the   ignition   on.
Visit
  www.citroen.co.uk   for   more   information   (compatibility,   additional   help,   ...).
Select "Bluetooth connection "
  and  
confirm.

05
Saisir code authentification
01
OK Del 23456789
_
372
USING THE TELEPHONE
A 
virtual   keypad   is   displayed   on   the  screen:
  enter   a   code   with   at   least  
4 digits

  and   conform   with  
OK
.
A
 

message
 
is   displayed   on   the   screen   of   the  
telephone:

 
enter   the   same   code   and   confirm. A
 

message   appears   in   the   screen   to   confirm   the   result   of   the  
connection.
Pairing

  can   also   be   initiated   from   the   telephone   by   searching   for  
detected

  Bluetooth   devices.
Accept
  the   connection   to   the   telephone.
If
 
pairing
 
fails,   try   again;   the   number   of   attempts   is   not   limited.The
  directory   and   the   calls   list   can   be   accessed   after   the  
synchronisation

  period   (if   the   telephone   is   compatible).
Automatic
  connection   must   be   configured   in   the   telephone   to   allow  
the

  connection   each   time   the   vehicle   is   started.
In
 
some
 
cases,   the   reference   number   of   the   telephone   or   the  
Bluetooth

 
address   may   appear   instead   of   the   name   of   the   telephone.
Pair/connect   the   telephone   then   listen:   see   the  
AUDIO
  section.
Streaming - Playing audio files via
Bluetooth

05
373
USING THE TELEPHONE
The telephone connection automatically includes hands free operation and  audio   streaming.
The
  ability   of   the   system   to   connect   to   just   one   profile   depends   on   the  
telephone.

  Both   profiles   may   connect   by   default.
Press MENU.
Select "Bluetooth connection "
  and  
confirm. Indicates

  connection   of   the   audio   steaming   profile.
Managing connections
Select "Connections management"
and  confirm.  The   list   of   paired  
telephones

  is   displayed. Select
  a   telephone   and   confirm.
Indicates   connection   of   the   hands-free   profile.
Then   select   and   confirm:
-  
"
Connect telephone
"   /   "
Disconnect
telephone":   to   connect   /   disconnect  
the

  telephone   or   the   hands-free  
connection

  only.
-  
"
Connect media player"   /  
"

Disconnect media player":   to  
connect

  /   disconnect   only   streaming.
-  " Connect telephone + media
player"   /   "Disconnect telephone +
media player":   to   connect   /  
disconnect

  the   telephone   (hands-free  
and

  streaming).
-
 
"
Delete connection":   to   delete   the  
pairing.
Indicates

  that   a   device   is   connected.

05
374
USING THE TELEPHONE
To display the "TELEPHONE "   menu:
-  
Make along press on SOURCE or SRC.
- Or,   press   OK   to   display   the  contextual
  menu.   Select   "Call"
  and  
confirm.
-

 
Or
,   press   MENU, select
"Telephone"
  and   confirm.  
Select

"Call"   and   confirm.
Select "Dial"
  to   enter   a   number   and  
confirm. T

o   display   the   "
TELEPHONE"   menu:
-  Make   a   long   press   on  SRC/TEL .
-  Or ,   press   the   dial   to   display   the  contextual
  menu.   Select   "Call"
  and  
confirm.
-
 Or

,   press   MENU, select "Telephone"
and
  confirm.   Select   "Call"   and
 confirm.
Select

OK   and   confirm   to   start   the  
call. Select "

Calls list"   and   confirm.
Making a call - Dialling
Select numbers one at a time using the 7   and   8   buttons   and   confirm.
Making a call - Recently called numbers*
Select the number and confirm to start  the   call.
The
 
calls
 
list
 
includes   calls   sent   and   received   in   the   vehicle   using   the  
connected

 
telephone.
*
 
Depending
 
on
 
the
 
compatibility   of   the   telephone.
Correction
 
allows
 
numbers
 
to
 
be
 
deleted
 
one
 
at
 
a
 
time. It
 
is
 
possible
 
to   make   a   call   directly   from   the   telephone;   park   the  
vehicle

 
first
 
as   a   safety   measure.

05
375
USING THE TELEPHONE
To display the "TELEPHONE "   menu:
-  
Make
  a   long   press   on  
SRC/TEL
.
-
 
Or
,   press   the   dial   to   display   the  
contextual

  menu.   Select   "Call"
  and  
confirm.
-
 Or

,   press   MENU, select "Telephone"
and
  confirm.   Select   "Call"   and
 confirm.
Select "

Directory"
  and   confirm. An
  incoming   call   is   announced   by   a   ring   and   a   superimposed   display  
in

  the   multifunction   screen.
Mobile
(depending
  on   the   information  
available

  in   the   contact   records   of  
the

  telephone   connected). "YES"
  to   accept   the   call   is   selected   by  
default.
Press

OK   to   accept   the   call.
Select "NO"
  and   confirm   to   reject   the  
call.
or
Press one of these buttons to accept
the

  call.
Making a call - From the directory of contacts
Select a contact then confirm.
Receiving a call
Select the number and confirm.A
 
long   press   on  
ESC
or on TEL,
SOURCE or SRC   also   rejects   an  
incoming

  call.
b
usiness
Home