change time Citroen C4 2015 2.G User Guide

219
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Checks
Particle filter (Diesel)
- fixed  illumination   of   the   particle  f
ilter   warning   lamp,   accompanied  
b

y   an   audible   signal   and   a  
m

essage   that   there   is   a   risk   of  
b

lockage   of   the   particle   filter.
The presence of this label, in particular with
the
 
Stop
 
&
 
Start
 
system,
 
indicates
 
the
 
use
 
of
 
a s

pecific 12 V lead-acid battery with special
technology
 
and
 
specification.
 
The
 
involvement
 
o

f
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop
 
i

s
 
essential
 
when
 
replacing
 
or
 
disconnecting
 
t

he
 
battery. As
 
soon
 
as   the   traffic   conditions   permit,  
r

egenerate   the   filter   by   driving   at   a   speed   of   at  
l

east
 
40
 
mph   (60   km/h)   until   the   warning   lamp  
g

oes
 
off.
If
 
the
 
warning   lamp   stays   on,   refer   to   the  
"

Additive
 
level"   section.
Unless
 
other wise
 
indicated,
 
check
 
these
 
components
 
in
 
accordance
 
with
 
the
 
manufacturer's
 
service
 
schedule
 
and   according   to   your   engine.
Other wise,
 
have
 
them
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Air filter and passenger compartment filter
Refer to the manufacturer's s
ervice schedule for details of the
replacement
  intervals   for   these  
c

omponents.
Oil filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice schedule for details of
the
  replacement   interval   for   this  
c

omponent.
12 V battery
The battery does not require any maintenance.
H owever,   check   that   the   terminals   are   clean a

nd   correctly   tightened,   particularly   in   summer
 a

nd   winter.
When carrying out work on the battery, refer to the "12 V battery" section for details of the
precautions
  to   be   taken   before   disconnecting  
t

he   battery   and   following   its   reconnection.Depending
  on   the   environment   (e.g.   dusty  a
tmosphere)   and   the   use   of   the   vehicle  
(e.g.
  city   driving),   replace them twice as often
if necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.The start of saturation of the particle filter is
indicated
  by:
on a n

ew vehicle, the first operations of
regeneration
  of   the   particle   filter   may   be  
a

ccompanied   by   the   smell   of   "burning",  
w

hich   is   per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle at very low speed or at idle,
you
  may,   in   exceptional   circumstances,  
n

otice   the   emission   of   water   vapour   at  
t

he   exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
  the   environment.
10
Checks

246
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Changing daytime running lamp /
s idelamp bulbs (on models
with xenon or type 1 halogen
headlamps)
F Remove   the   protective   cover   by   pulling   the  t
ab.
F
 
D
isconnect   the   bulb   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
p

ull it out
F
 
P
ull   the   bulb   out   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
Changing daytime running
lamps / sidelamps (on models
with type
2 halogen headlamps)
For the replacement of this type of LED lamp, contact   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Practical information

03
293
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
STEERING MOUNTED CONTROLS
- Short  press:
 Change

  the   multimedia   source.
 Accept

  an   incoming   call.
 Call

  in   progress:   access   to   the  
telephone

  menu   (End   call,   Secret  
mode,

  Hands-free   mode).
-
 
Long
  press:
 Reject

  an   incoming   call.
 End

  a   call   in   progress.
 Other

  than   call   in   progress:   access   to  
the

  telephone   menu   (Dial,   Contacts,  
Call

  log,  
Answerphone).
-

 
Rotation.
 Radio:

  automatic   search   for  
previous /

  next   station.
 Media:

  previous   /   next   track.
-
 
Press:
  confirmation.
-
 
Short
  press:
 Radio:

  display   the   list   of   stations.
 Media:

  display   the   list   of   tracks.
-
 
Long
  press:   update   the   list   of   stations  
received.
-

 
Increase
  volume.
-
 
Decrease
  volume.

04
305
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
RADIO
If "DAB / FM auto tracking" is activated, there is a difference of a few  seconds   when   the   system   switches   to   "FM"   analogue   radio   with  
sometimes

  a   variation   in   volume.
When
  the   digital   signal   is   restored,   the   system   automatically  
changes

  back   to   "DAB".
Select
 
change
 
of
 
source.
Press on Media
 
to
 
display
 
the
 
primary
 
page.
Select "DAB Radio".
Select "List"
 
in
 
the
 
primary
 
page.
or
Select "Radio list"
 
in
 
the
 
secondary
 
page.
Select
 
the
 
radio
 
station
 
from
 
the
 
list
 
offered.
Digital
 
radio
 
provides
 
higher
 
quality
 
reception
 
and
 
also
 
the
 
graphical

 
display
 
of
 
current
 
information
 
on
 
the
 
radio
 
station
 
being
 
listened

 
to.
 
Select
 
"List"
 
in
 
the
 
primary
 
page.
The
 
range
 
of
 
multiplexes
 
available
 
is
 
displayed
 
in
 
alphabetical
 
order

.
Press Media  to   display   the   primary   page   then  
press

  on   the   secondary   page.
Select "Settings".
Select "RADIO".
Select "Digital/FM auto tracking " then
"Confirm". "DAB"   does   not   cover   100%   of   the   territory.
When   the   digital   radio   signal   is   weak,   "DAB / FM   auto   tracking"  
allows

  you   to   continue   listening   to   the   same   station,   by  
automatically

  switching   to   the   corresponding   "FM"   analogue  
station

  (if   there   is   one).
If   the   "DAB"   station   being   listened   to   is   not   available   on   "FM"   ("DAB/
FM"
  option   greyed   out),   or   "DAB / FM   auto   tracking"   is   not   activated,  
the

  sound   will   cut   out   while   the   digital   signal   is   too   weak.
Digital radio - DAB / FM auto tracking
DAB (Digital Audio Broadcasting)
Digital radio

04
306
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
CD, MP3 CD, USB player, auxiliary input
Insert the CD in the player, insert the USB memory  stick   in   the   USB   player   or   connect   the  
USB

  peripheral   to   the   USB   port   using   a   suitable  
cable

  (not   supplied)
The
  system   builds   playlists   (in   temporary  
memory),

  an   operation   which   can   take   from  
a

  few   seconds   to   several   minutes   at   the   first  
connection.
Reduce

  the   number   of   non-music   files   and   the  
number

  of   folders   to   reduce   the   waiting   time.
The
  playlists   are   updated   every   time   the   ignition  
is

  switched   off   or   connection   of   a   USB   memory  
stick.

  However,   the   system   memorises   these  
lists

  and   if   they   are   not   modified,   the   loading  
time

  will   be   shorter. Selection of source
The
  steering   mounted  
SRC
  (source)   button   can   be   used   to   go   to   the  
next

  media   source,   available   if   the   source   is   active.
Press OK
  to   confirm   the   selection.
"CD / CD MP3"
"USB, iPod"
"Bluetooth (streaming)"
"Auxiliary"
"Radio" Select
  change   of   source   then   choose   the  
source. Press on
Media   to   display   the   primary   page.
MUSIC

05
324
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Adding a waypointOrganising waypoints
Select "Enter destination".
Select "Itinerary".
Select "Add waypoint" then "Address".
The address of the waypoint is entered in
the
  same   way   as   a   destination,   so   enter  
the "

City:" or post code, the "Road:" and
the "N°:".
  Confirm   each   time.
Then select "Add waypoint ". Select
  the   waypoint   that   you   want   to   move   in  the
  order.
To
  organise   waypoints,   carry   out   the   previous   operations   1   to   3  
again

  (Adding   a   waypoint).
Select "Up".
Select "Down".
Select "Delete".
Select "Road map"
  to   view   the   changes   made  
to

  the   route.
Select "Navigate to".
Select the criteria then "Confirm" to start
guidance
  and   give   the   general   direction   of   the  
navigation

  route.
Press on Navigation
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
NAVIGATION - GUIDANCE

06
339
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Select:
- "Time/Date"   to   change   the   time   zone,  
synchronisation

  with   GPS,   time   and   its  
format

  and   then   the   date.
-
"Languages"   to   change   the   language.
-
"Calculator" to display a calculator
-
"Calendar"   to   display   a   calendar.
Press on Configuration
 

to   display   the   primary  
page

  then   go   to   the   secondary   page.
Modify system settings
System
Select "System Settings". Press on Configuration
 

to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Units"   to   change   the   units   of   distance,  
fuel

  consumption   and   temperature.
Select "Factory settings" to return to the
original
  settings.
Select "Delete data" to delete the list of recent
destinations, personal points of interest,
contacts
  in   the   list.
Choose
  the   item   then   select   "Delete".
CONFIGURATION
Select "Screen settings". Press on Configuration
 
to   display   the   primary  
page

  then   go   to   the   secondary   page.
a

ctivate or deactivate "Activate automatic text
scrolling " and "Activate animations".

361
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
STEERING MOUNTED CONTROLS
- Short  press: Change
  multimedia   source.
 Accept

  an   incoming   call.
 Call

  in   progress:   access   to   the   telephone   menu   (End   call,   Secret  
mode,

  Hands-free   mode).
-
 
Long
  press:
 Reject

  an   incoming   call.
 End

  a   call   in   progress.
 No

  call   in   progress:   access   to   the   telephone   menu   (Call,   Contacts,  
call

  log,   Voice   mail).
-
 
Rotation. Radio:

  automatic   search   for   the   previous   /   next   station.
 Media:

  previous   /   next   track.
-
 
Press:
  confirmation.
-
 
Short
  press:
 Radio:

  display   the   list   of   stations.
 Media:

  display   the   list   of   tracks.
-
 
Long
  press:   update   the   list   of   stations   received.
-
 
Increase
  volume.
-
 
Decrease
  volume.
-
 
Short

 
press:
 
mute:
 
change
 
multimedia
 
source.
-
 
Long

 
press:
 
mute
 
/
 
restore
 
sound.
-
 
Rotation: Radio:

 
automatic
 
search
 
for
 
the
 
previous
 
/
 
next
 
station.
 Media:

 
previous
 
/
 
next
 
track.
-
 
Press:

 
confirmation.
-
 
Short

 
press:
 Radio:

 
display
 
the
 
list
 
of
 
stations.
 Media:

 
display
 
the
 
list
 
of
 
tracks.
-
 
Long

 
press:
 
update
 
the
 
list
 
of
 
stations
 
received.
-
 
Increase

 
volume.
-
 
Decrease

 
volume.
Audio system Audio / Bluetooth telephone system
02

04
363
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
AUDIO
Press SOURCE or SRC several times in succession  and   select   radio.
Press BAND
 

to   select   a   waveband. Press LIST
to display the list of stations
received   in   alphabetical   order.
A
 
press   changes   to   the   next   or   previous  
letter

  (e.g.  
A,
  B,   D,   F,   G,   J,   K,   ...).
Radio
Select the desired radio station and
confirm  by   pressing  OK .
Selecting a station
A
 
long   press   on  
LIST builds or updates
the

  list   of   stations;   audio   reception   is   cut  
momentarily

.
The
 
exterior
 
environment
 
(hills,
 
buildings,
 
tunnel,
 
car
 
park,
 
below
 
ground...)

 
may
 
prevent
 
reception,
 
even
 
in
 
RDS
 
station
 
tracking
 
mode.

 
This

 
phenomenon
 
is
 
normal
 
in
 
the
 
propagation
 
of
 
radio
 
waves

 
and
 
is
 
in
 
no
 
way
 
indicative
 
of
 
a
 
fault
 
with
 
the
 
audio
 
system.

04
367
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
AUDIO
Change band (FM1, FM2, DAB, ...)
DAB (Digital Audio Broadcasting)
Digital radio
Digital radio provides a superior audio quality and also additional categories  of   traffic   announcements   (TA  INFO).
The
  different   "multiplex   services"   offer   a   choice   of   radio   stations   in  
alphabetical

  order.
Change
  of   station   within   the   same   "multiplex   service".
Start
  a   search   for   the   next   "multiplex   service".
Digital radio - DAB / FM tracking
"DAB" does not have 100% coverage of the country.
When   the   digital   signal   is   weak,   "DAB   /   FM   auto   tracking"   allows   you  
to

  continue   listening   to   the   same   station,   by   automatically   switching  
to

  the   corresponding   analogue   "FM"   station   (if   it   exists).
Long
 
press:
 
select
 
the
 
desired
 
categories
 
of
 
announcements

 
from
 
T

ransport,
 
News,
 
Entertainment
 
and

 
Flash
 
special
 
(availability
 
according
 
to
 
the
 
station).
When the radio station is displayed in the screen, press on " OK" to
display
 
the
 
contextual
 
menu.
(Frequency
 
hopping
 
(RDS),
 
DAB / FM
 
auto
 
tracking,
 
RadioText
 
(TXT)

 
display,
 
Information
 
on
 
the
 
station, ...) Press the "Menu"
  button.
Select "Multimedia"
  and   confirm.
Select "DAB / FM auto tracking"
  and   confirm
If
  "DAB   /   FM   auto   tracking"   is   on,   there   will   be   a   difference   of   a   few  
seconds

  in   the   programme   when   the   system   changes   to   analogue  
"FM"

  radio,   with   sometimes   a   variation   in   volume.
When
  the   strength   of   the   digital   signal   is   good   again,   the   system  
automatically

  switches   back   to   "DAB"
If
  the   "DAB"   station   you   are   listening   to   is   not   available   on   "FM"  
("

DAB/FM"   option   barred),   or   if   "DAB   /   FM   auto   tracking"   is   not   on,  
the

  sound   will   be   cut   when   the   digital   signal   is   too   weak.