mirror Citroen C4 2015 2.G User Guide

99
C4-2_en_Chap04_confort_ed01-2015
C4-2_en_Chap04_confort_ed01-2015
Automatic tilting in reverse gear
System which provides a view of the ground during   parking   manoeuvres   in   reverse   gear.
Programming
F With  the   engine   running,   engage   reverse  g
e a r.
F
 
S
elect   and   adjust   the   left-hand   and   right-
hand
  mirrors   in   succession.
The
  adjustment   is   stored   immediately.
Switching on
F With  the   engine   running,   engage   reverse  g
e a r.
F

M
ove control A   to   the   right   or   to   the   left   to  
s

elect   the   corresponding   mirror.
The
  glass   of   the   mirror   selected   tilts  
d

ownwards, in accordance with its
programming.
Switching off
F Exit   reverse   gear   and   wait   ten   seconds.
or
F

R
eturn control A   to   the   central   position.
The
  mirror   glass   returns   to   its   initial   position.
The
  mirror   glass   also   returns   to   its   initial  
p

osition:
-
 
i
f   the   speed   exceeds   6   mph   (10   km/h),
-
 
i
f   the   engine   is   switched   off.
Unfolding
F From  outside:   unlock   the   vehicle   using   the  r
emote   control   or   the   key.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If
  necessary   the   mirrors   can   be   folded  
m

anually.
The
  folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated by a CITR
oËn
dealer or a
qualified
 w

orkshop.
4
Comfort

100
C4-2_en_Chap04_confort_ed01-2015
C4-2_en_Chap04_confort_ed01-2015
Automatic day/night model
By means of a sensor, which measures the light   from   the   rear   of   the   vehicle,   this   system  
a

utomatically   and   progressively   changes  
b

etween   the   day   and   night   uses.
Steering wheel adjustment
F When stationary , pull the control lever to
release   the   adjustment   mechanism.
F
 
A
djust   the   height   and   reach   to   suit   your  
d

riving   position.
F
 
P
ush   the   control   lever   to   lock   the  
a

djustment
 m
echanism.
Rear view mirror
Manual day/night model
Adjustment
F Adjust  the   mirror   so   that   the   glass   is  
directed   correctly   in   the   "day"   position.
Day/night position
F Pull  the   lever   to   change   to   the   "night"   anti-
dazzle   position.
F
 
P
ush   the   lever   to   change   to   the  
normal
  "day"   position.
as a s
afety precaution, these
operations should only be carried out
with   the   vehicle   stationary.
In   order   to   ensure   optimum   visibility  d
uring   your   manoeuvres,   the   mirror  l
ightens   automatically   when   reverse  
g

ear
 i
s
 enga
ged.
Adjustable
  mirror   providing   a   central   rear ward   view.
Equipped   with   an   anti-dazzle   system,   which   darkens   the   mirror   glass   and   reduces   the   nuisance   to  
t

he   driver   caused   by   the   sun,   headlamps   from   other   vehicles...
Comfort

102
C4-2_en_Chap05_amenagement_ed01-2015
C4-2_en_Chap05_amenagement_ed01-2015
12 V accessory socket
F To  connect   a   12   V   accessory   (max   power:  1
20   W),   lift   the   cover   and   connect   a  
s

uitable
 a
daptor.
Component
 
which
 
protects
 
against
 
sunlight
 f
rom
 
the
 
front
 
or
 
the
 
side,
 
also
 
equipped
 
with
 
an
 
i

lluminated
 v

anity
 m

irror.
F
 
W

ith
 
the
 
ignition
 
on,
 
raise
 
the
 
concealing
 
f

lap;
 
the
 
mirror
 
is
 
illuminated
 
automatically.
This
 
sun
 
visor
 
is
 
also
 
equipped
 
with
 
a
 
ticket
 
h

o l d e r.
Sun visor Illuminated glove box
It has dedicated locations for storing a water b
ottle,   the   vehicle's   handbook   pack...
Its
  lid   has   locations   for   storing   a   pen,   a   pair   of  
g

lasses,   tokens,   maps,   a   cup...
F
 
T
o   open   the   glove   box,   raise   the   handle.
The
  glove   box   is   illuminated   when   the   lid   is  
ope

ned.
It
  gives   access   to   the   passenger's   front   airbag  
d

eactivation switch A .
It
  contains   an   adjustable   ventilation   nozzle   B,
distributing
  the   same   conditioned   air   as   the  
v

ents   in   the   passenger   compartment.
Fittings

123
C4-2_en_Chap06_visibilite_ed01-2015
C4-2_en_Chap06_visibilite_ed01-2015
Automatic illumination of
headlamps
The sidelamps and dipped beam headlamps are   switched   on   automatically,   without   any  
a

ction on the part of the driver, when a low level
of
  external   light   is   detected   or   in   certain   cases  
o

f   activation   of   the   windscreen   wipers.
As
  soon   as   the   brightness   returns   to   an  
a

dequate   level   or   after   the   windscreen   wipers  
a

re   switched   off,   these   lamps   are   switched   off  
a

utomatically   and   the   daytime   running   lamps  
c

ome   on.
Activation
F Turn   ring   A to the "AUTO"  position.   The  a
ctivation   of   the   function   is   confirmed   by  
t

he   display   of   a   message.
Deactivation
F Turn  ring   A to a position other than
"AUTO" .
  The   deactivation   of   the   function   is  
c

onfirmed   by   the   display   of   a   message.
Operating fault
In the event of a fault with the
sunshine  sensor,   the   lighting   come  
o

n,   this   warning   lamp   is   displayed  
o

n   the   instrument   panel   and/or   a  
m

essage   appears   in   the   screen,  
a

ccompanied   by   an   audible   signal.
Contact
  a   CITROËN   or   a   qualified  
w

orkshop   workshop.
In
 
fog   or   snow,   the   sunshine   sensor  
m

ay
 
detect   sufficient   light.   Therefore,  
t

he
 
lighting   will   not   come   on  
au

tomatically.
do n

ot cover the sunshine sensor,
coupled with the rain sensor and
located in the centre of the windscreen
behind
  the   rear   view   mirror;   the  
a

ssociated   functions   would   no   longer  
be c

ontrolled.
6
Visibility

124
C4-2_en_Chap06_visibilite_ed01-2015
C4-2_en_Chap06_visibilite_ed01-2015
Switching off
The welcome lighting switches off automatically after   a   programmed   time,   when   the   ignition   is  
s

witched   on   or   on   locking   the   vehicle.
Welcome lighting
Switching on
F Press  the   open   padlock   on   the  r
emote   control   or   one   of   the   front  
d

oor handles with the "
ke
yless
Entry
  and   Starting"   system.
The
 
remote   switching   on   of   the   lighting   makes  
y

our
 
access   to   the   vehicle   easier   in   poor   light.  
I

t
 
is
 
activated   depending   on   the   ambient   light  
l

evel
 
detected   by   the   sunshine   sensor.
The
 
sidelamps   and   dipped   beam   headlamps,  
a

s
 
well
 
as
  the   side   spotlamps,   located   under  
t

he
 
door
 
mirrors,   come   on;   your   vehicle   is   also  
u

nlocked.
Programming
activation or deactivation, as well as
the   duration   of   the   lighting   duration  
f

or   the   welcome   lighting   can   be   set  
v

ia   the   vehicle   configuration   menu.
Automatic
"Guide-me-home"
lighting
When the automatic illumination of headlamps f
unctions   is   activated,   if   the   ambient   light   level  
i

s   low   the   dipped   beam   headlamps   remain   on  
w

hen   switching   off   the   ignition.
Settings
activation and deactivation, as
well  as   the   duration   of   the   guide-
me-home
  lighting   can   be   set   in   the  
v

ehicle   configuration   menu.
Visibility

130
C4-2_en_Chap06_visibilite_ed01-2015
C4-2_en_Chap06_visibilite_ed01-2015
Operating fault
If an automatic rain sensitive wiper malfunction occurs,   the   wipers   will   operate   in   intermittent  
m

ode.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Windscreen and headlamp
wash
Low screenwash / headlamp
wash fluid level
On vehicle fitted with headlamp washers, the low   level   of   this   fluid   is   indicated   by   gauge   in  
t

he   reservoir   filler   neck   under   the   bonnet.
Checking
  and   topping   up   this   fluid   can   should  
b

e   done   with   the   engine   off.
The
  level   of   this   fluid   should   be   checked  
r

egularly,
 par
ticularly
 d
uring
 w
inter.
Refer
  to   "Checks   -   Screenwash   /   headlamp  
w

ash level" section for the procedure on
checking
  the   level.
F
 
P

ull
 
the
 
windscreen
 
wiper
 
stalk
 
towards
 
y

ou.
 
The
 
windscreen
 
wash
 
then
 
the
 w
indscreen
 
wipers
 
operate
 
for
 
a
 
fixed
 p
eriod.
The
 
headlamp
 
washers
 
only
 
operate
 
when
 
the
dipped or main beam headlamps are on, with
the vehicle moving .
Do
 
not
 
cover
 
the
 
rain
 
sensor,
 
linked
 
with
 t

he sunshine sensor and located in the
centre of the windscreen behind the rear
view
 
mirror.
Switch
 
off
 
the
 
automatic
 
rain
 
sensitive
 w

ipers
 
when
 
using
 
an
 
automatic
 
car
 
wash.
In winter, it is advisable to wait until the
windscreen
 
is
 
completely
 
clear
 
of
 
ice
 b

efore
 
activating
 
the
 
automatic
 
rain
 sen

sitive
 w

ipers. To
 
reduce
 
the
 
consumption
 
of
 
the
 
fluid
 
b

y
 
the
 
headlamp
 
washers,
 
they
 
operate
 
o

nly with every seventh use of the
screenwash
 
or
 
every
 
25
 
miles
 
(40
 
km)
 
d

uring
 
a
 
given
 
journey.
Visibility

196
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
blind spot sensors
This driving assistance system warns the driver of the presence of another vehicle in the blind
spot
  angle   of   their   vehicle   (areas   masked   from  
t

he   driver's   field   of   vision),   as   soon   as   this  
p

resents   a   potential   danger.
Operation
F On  switching   on   the   ignition,   or   engine  r
unning,   press   this   button   to   activate   the  
f

unction;   the   warning   lamp   comes   on.
Sensors
  fitted   in   the   front   and   rear   bumpers  
m

onitor   the   blind   spots.
A
 
warning
 
lamp
 
appears
 
in
 
the
 
door
 
mirror
 
on
 t
he
 
side
 
in
 
question:
-
 i
mmediately,
 
when
 
being
 
overtaken,
-

a

fter a delay of about one second, when
overtaking
 
a
 
vehicle
 
slowly.
This
 
system
 
is
 
designed
 
to
 
improve
 
s

afety
 
when
 
driving
 
and
 
is
 
in
 
no
 
c

ircumstances
 
a
 
substitute
 
for
 
the
 
use
 
o

f
 
the
 
interior
 
rear
 
view
 
mirror
 
and
 
door
 
m

irrors.
 
It
 
is
 
the
 
driver's
 
responsibility
 
to
 
c

onstantly
 
check
 
the
 
traffic,
 
to
 
assess
 
t

he distances and relative speeds
of other vehicles and to predict their
movements
 
before
 
deciding
 
whether
 
to
 
c

hange
 lan

e.
The
 
blind
 
spot
 
sensor
 
system
 
can
 
never
 
r

eplace
 
the
 
need
 
for
 
vigilance
 
on
 
the
 
p

art
 
of
 
the
 
driver.
driving

197
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
No alert will be given in the following situations:
-  i n   the   presence   of   immobile   objects  
(

parked   vehicles,   barriers,   street   lamps,  
r

oad
 s
igns...),
-
 
w
ith   vehicles   moving   in   the   opposite  
d

irection,
-
 
d
riving   on   a   sinuous   road   or   a   sharp  
c

o r n e r,
The
 
alert
 
is
 
given
 
by
 
a
 
warning
 
lamp
 
which
 
c

omes
 
on
 
in
 
the
 
door
 
mirror
 
on
 
the
 
side
 
in
 
q

uestion
 
as
 
soon
 
as
 
a
 
vehicle
 
-
 
car,
 
lorry,
 
c

ycle -
 
is
 
detected
 
and
 
the
 
following
 
conditions
 
a

re
 
fulfilled:
-
 
a

ll
 
the
 
vehicles
 
must
 
be
 
moving
 
in
 
the
 
sa

me
 d

irection,
-
 
t

he
 
speed
 
of
 
your
 
vehicle
 
is
 
between
 
7
 
and
 
7

5
 
mph
 
(12
 
and
 
140
 
km/h),
-
 
w

hen
 
you
 
overtake
 
a
 
vehicle
 
with
 
a
 
speed
 
d

ifference
 
of
 
less
 
than
 
6
 
mph
 
(10
 
km/h),
-
 
w

hen
 
a
 
vehicle
 
overtakes
 
you
 
with
 
a
 
speed
 
d

ifference
 
of
 
less
 
than
 
15
 
mph
 
(25
 
km/h),
-
 
t

he
 
traffic
 
must
 
be
 
flowing
 
normally,
-
 
i

n
 
the
 
case
 
of
 
an
 
overtaking
 
manoeuvre,
 i
f
 
this
 
is
 
prolonged
 
and
 
the
 
vehicle
 
being
 ov
ertaken
 
remains
 
in
 
the
 
blind
 
spot,
-
 
y

ou
 
are
 
driving
 
on
 
a
 
straight
 
or
 
slightly
 
c

urved road,
-
 
y

our
 
vehicle
 
is
 
not
 
pulling
 
a
 
trailer,
 
a
 
c

aravan... -
 w hen   overtaking   (or   being   overtaken   by)   a  v
ery   long   vehicle   (lorry,   coach...)   which   is  
a

t   the   same   time   detected   at   the   rear   in   the  
b

lind   spot   angle   and   present   in   the   driver's  
f

orward field of vision,
-
 
i
n   very   heavy   traffic:   vehicles   detected   in  
f

ront and behind are confused with a lorry
or
  a   stationary   object,
-
 
w
hen   overtaking   quickly.
9
driving

198
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
F To  deactivate   the   system,   press   this   button  a
gain;   the   warning   lamp   goes   off.
The
  state   of   the   system   remains   in   memory   on  
s

witching   off   the   ignition.
Operating fault
The system is automatically deactivated when   towing   with   a   towbar   approved   by  
CIT

ROËN. The
  system   may   suffer   temporary  
i

nterference in certain weather
conditions(rain,
 h
ail...).
In   particular,   driving   on   a   wet   sur face  
o

r   moving   from   a   dry   area   to   a   wet   area  
c

an   cause   false   alerts   (for   example,   the  
p

resence   of   a   fog   of   water   droplets   in  
t

he   blind   spot   angle   is   interpreted   as   a  
v

ehicle).
In bad or wintry weather, ensure that
the   sensors   are   not   covered   by   mud,   ice  
o

r   snow.
Take   care   not   to   cover   the   warning   zone  
i

n   the   door   mirrors   or   the   detection  
z

ones   on   the   front   and   rear   bumpers  
w

ith   adhesive   labels   or   other   objects;  
t

hey   may   hamper   the   correct   operation  o
f   the   system.
In   the   event   of   a   fault,   the   warning   lamp   in   the  
b

utton   flashes   then   goes   off.
Have   it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Driving

247
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Changing foglamp bulbs
F Introduce a flat screwdriver in the hole in the f inisher.
F
 
P
ull   and   lever   to   unclip   the   bumper   finisher  
(

the   parking   sensor   stays   with   the   finisher).
F
 
R
emove   the   two   module   fixing   screws   and
 r

emove   it   from   its   housing.
F
 
D
isconnect   the   bulb   holder   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
e

xtract   it.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
To
  replace   these   bulbs   you   may   also   contact   a
 C

ITROËN   dealer   or   a   qualified   workshop.
Changing the side spotlamps
(LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Changing integrated direction
indicator side repeaters
F Insert a flat screwdriver towards the centre of the repeater between the repeater and
the
  base   of   the   mirror.
F
 
T
ilt   the   flat   screwdriver   to   extract   the  
r

epeater   and   remove   it.
F
 
D
isconnect   the   repeater   connector.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   obtain   replacement   repeaters.
11
Practical information