instrument panel Citroen C4 2015 2.G Owner's Guide

172
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automatic release
Full release of the parking brake is 
c onfirmed   by:
-
 
t
he   braking   warning   lamp   and  
t

he P   warning   lamp   in   the   control  
l

ever A   going   off,
-
 
d
isplay   of   the   message   "Parking  
b

rake   off ".
Automatic application,
engine off
- illumination of t he b raking w arning l
amp   and   of   the   P  warning   lamp   in t

he control lever A ,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
The
 
application   of   the   parking   brake   is  
c

onfirmed   by:
With
 
the
 
vehicle   stationary,   the   parking   brake  
i

s automatically applied when the engine is
switched off .
Before   leaving   the   vehicle,   ensure  
t

hat   parking   brake   warning   lamp   in  
t

he
  instrument   panel   is   on   fixed   (not  
f

lashing).
ne

ver leave a child alone inside the
vehicle
  with   the   ignition   on,   as   they  
c

ould   release   the   parking   brake.
When stationary, with the engine running, do not press the accelerator pedal unnecessarily,
as
  you   may   release   the   parking   brake.
In the case of towing, a loaded vehicle or   parking   on   a   gradient,   turn   the   front  
w

heels   towards   the   pavement   and  
e

ngage   a   gear   when   you   park.The
  electric   parking   brake   releases
automatically and progressively when you
press
  the   accelerator:
F

M
anual gearbox: press down fully on the
clutch
  pedal,   engage   first   gear   or   reverse,  
p

ress   on   the   accelerator   pedal   and   move  
o

f f.
F

E
lectronic gearbox: select position A, M
or R
  then   press   on   the   accelerator   pedal.
F

A
utomatic gearbox: select position D, M
or R
  then   press   the   accelerator   pedal.
Driving

173
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Immobilising the vehicle,
engine running
- illumination  of   the   braking  w
arning   lamp   and   the   P   warning  
l

amp   in   the   control   lever   A,
-
 
d
isplay   of   the   message   "Parking  
b

rake   on".
Particular situations
In certain situations (e.g. starting the engine), the   parking   brake   can   automatically   alter   its  
f

orce.   This   is   normal   operation.
To
  advance   your   vehicle   a   few   centimetres  
w

ithout   starting   the   engine,   but   with   the   ignition  
o

n,   press   on   the   brake   pedal   and   release   the  
p

arking   brake   by pulling then releasing the
control lever A .
  The   full   release   of   the   parking  
b

rake   is   confirmed   by   the   warning   lamps   in  
t

he control lever A   and   in   the   instrument   panel  
g

oing   off   and   display   of   the   message   "Parking  
b

rake   off ".
When
 
the
 
driver’s
 
door
 
is
 
opened,
 
a
 
message
 
is
 
d

isplayed
 
accompanied
 
by
 
an
 
audible
 
signal,
 
if
 
t

he
 
parking
 
brake
 
has
 
not
 
been
 
applied,
 
except
 
i

n
 
the
 
case
 
of
 
an
 
automatic
 
gearbox
 
with
 
the
 
g

ear
 
lever
 
in
 
position
 
P .
The
 
application
 
of
 
the
 
parking
 
brake
 
is
 
c

onfirmed
 
by:
With
 
the
 
engine
 
running
 
and
 
the
 
vehicle
 s
tationary,
 
in
 
order
 
to
 
immobilise
 
the
 
vehicle
 
i

t is essential to manually
 

apply
 
the
 
parking
 
b

rake
 
by
 
pulling control lever A .
Before
 
leaving
 
the
 
vehicle,
 
ensure
 t

hat
 
parking
 
brake
 
warning
 
lamp
 
in
 
the
 i

nstrument
 
panel
 
is
 
on
 
fixed,
 
not
 
flashing.
9
Driving

180
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Displays in the instrument panel
Gear lever positions
N. neutral
R.
R everse
1, 2, 3, 4, 5, 6.
 
G
ears   in   sequential   mode.
AUTO.
  

 
T
his   comes   on   when   the   automated  
m

ode   is   selected.   It   switches   off   on  
c

hanging   to   sequential   mode.F

Sel
ect position N
.
F  
P
ress   the   brake   pedal   down   fully.
F  
S
tart   the   engine.
Moving off
F Select
  automated   mode   (position   A)   or  s
equential   mode   (position   M)
  or   reverse  
(

position
 R).
F

 
R
elease   the   parking   brake   unless   it   is  
p

rogrammed   to   automatic   mode.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
A
ccelerate   away.
AUTO and 1, 1 or R
  appear   in   the   instrument  
p

anel
 sc
reen.
N
 
appears
 
in
 
the
 
instrument
 
panel
 
sc

reen.
You
  must   press   the   brake   pedal   when  
s

tarting   the   engine.
Engagement
 
of
 
reverse
 
gear
 
is
 
a

ccompanied
 
by
 
an
 
audible
 
signal. If
 
the
 
engine
 
does
 
not
 
start:
-

If N
 
is
 
flashing
 
in
 
the
 
instrument
 
p

anel,
 
move
 
the
 
gear
 
lever
 
to
 
p

osition A , then to position N .
-

I

f the "Foot on
brake"  warning
 
lamp
 
c

omes
 
on,
 
accompanied
 
b

y
 
an
 
audible
 
signal
 
and
 
t

he
 
display
 
of
 
a
 
message,
 
p

ress
 
the
 
brake
 
pedal
 
f

i r m l y.
Driving

181
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automated mode
For optimum acceleration, for example when   overtaking   another   vehicle,   press   the  
a

ccelerator   pedal   firmly   past   the   point   of  
r

esistance.
The
  gearbox   operates   in   auto-active   mode,  
w

ithout   any   action   on   the   part   of   the   driver.  
It   continuously   selects   the   most   suitable   gear  
fo

r:
-  
o
ptimisation   of   fuel   consumption,
-  
t
he   style   of   driving,
-  
t
he   profile   of   the   road.
-  
t
he   vehicle   load.
AUTO
 
and   the   gear   engaged  
a

ppear   in   the   instrument   panel  
sc

reen.
ne

ver select neutral N while the vehicle
is
  moving.
ne
ver select neutral N  
w
hen
 d
riving. You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
F

Sel
ect position A
.
Temporary control of gear
changing
You can temporarily take over control of g
ear   changing   using   the   "+" and "-" 
steering  
m

ounted   paddles:   if   the   engine   speed   allows,  
t

he   request   to   change   gear   is   acted   on.
This function allows you to anticipate certain
situations
  such   as   overtaking   a   vehicle   or   the  
a

pproach   to   a   corner.
After
  a   few   moments   without   any   action   on  
t

he   control   paddles,   the   gearbox   resumes  
a

utomatic   control   of   the   gears.
Manual mode
The gears engaged appear in succession   in   the   instrument   panel  
sc

reen.
The
 
gear
 
change   requests   are   only   acted   on   if  
t

he
 
engine
 
speed   permits.
It is not necessary to release the accelerator
during
 
gear
  changes.
When
 
braking   or   slowing   down,   the   gearbox  
c

hanges
 
down   automatically   to   allow   the  
v

ehicle
 
to
 
accelerate   in   the   correct   gear.
On
 
sharp
 
acceleration,   the   gearbox   will   not  
c

hange
 
up
 
unless   the   driver   acts   on   the   gear  
l

ever
 
or
 
the
  steering   mounted   paddles.
F

Sel

ect position M
.
9
Driving

183
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Automatic gearbox
Gear selection gate
1. Gear  lever.
2. bu tton "S" (spor t) .
3.


b
u
tton "T" (snow) . P.
  P

ark.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-  
S
tarting   the   engine.
R.
 
 
R
everse.
-  
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
  N
eutral.
-  
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n.
-  
S
tarting   the   engine.
D.
 
 
A
utomatic
 ope
ration.
M + / - .   
M
anual   operation   with   sequential  
c

hanging   of   the   six   gears.
F  P ress   for wards   to   change   up   through   the  g
ears.


or
F
 
P
ress   rear wards   to   change   down   through  
t

he   gears.
Gear lever
When you move the lever in the gate to select a  position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
  P

ark
R.

R
everse
N.
n
e
utral
D.
  D

rive   (Automatic   driving)
S.

Sp
ort
 pro
gramme
T .
 
S
now
 pro
gramme
1 to 6.
  Gear   engaged   during   manual   operation
-.
  I

nvalid   value   during   manual   operation
Displays in the instrument panelSix speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration, enhanced by sport and snow
programmes,
 o

r
 m
anual
 g
ear
 c
hanging.
Four
  driving   modes   are   offered:
-

a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,
-

sp
ort
 
programme   for   a   more   dynamic   style  
o

f   driving,
-

s
now
 
programme   to   improve   driving   when  
t

raction is poor,
-

m
anual
 
operation   for   sequential   changing  
o

f   the   gears   by   the   driver.
9
Driving

185
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
These two special programmes supplement the automatic   operation   in   very   specific   conditions  
o

f   use.
Sport programme "S"
F Press button "S" ,   after   starting   the   engine.
The   gearbox   automatically   favours   a   dynamic  
s

tyle   of   driving.
S
  appears   in   the   instrument   panel.
Snow programme "T"
F Press button " T",   after   starting   the   engine.
The   gearbox   adapts   to   driving   on   slippery  
r

oads.
This
  programme   improves   the   vehicle's   ability  
t

o   move   off   and   traction   when   grip   is   poor.
T
  appears   in   the   instrument   panel.F
 
A
t   any   time,   press   the   button   selected  
a

gain   to   quit   the   programme   engaged   and  
r

eturn   to   auto-adaptive   mode.
Sport and snow programmes
Return to automatic
operation
9
Driving

186
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Manual operation
D disappears and the gears engaged   appear   in   succession   in  
t

he   instrument   panel.
Invalid value during manual
operation
This symbol is displayed if a gear is   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
If the lever is not in position P , when the
driver's  d oor  i s  o pened  o r  a pproximately  
4

5   seconds   after   the   ignition   is   switched  
o

ff,   there   is   an   audible   signal   and   a  
m

essage
 ap
pears.
F

R
eturn the lever to position P ;
 
t

he   audible   signal   stops   and   the  
m

essage
 d
isappears.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
six
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 p
ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 t
emporarily
 
in
 
automatic
 
mode.
If
 
the
 
engine
 
speed
 
is
 
too
 
low
 
or
 
too
 
high,
 
the
 
g

ear
 
selected
 
flashes
 
for
 
a
 
few
 
seconds,
 
then
 
t

he
 
actual
 
gear
 
engaged
 
is
 
displayed.
It
 
is
 
possible
 
to
 
change
 
from
 
position
 
D
(automatic)
 
to
 
position
 
M
 
(manual)
 
at
 
any
 
time.
When
 
the
 
vehicle
 
is
 
stationary
 
or
 
moving
 
v

ery
 
slowly,
 
the
 
gearbox
 
selects
 
gear
 
M1
automatically.
The
 
sport
 
and
 
snow
 
programmes
 
do
 
not
 
o

perate
 
in
 
manual
 
mode. Before
  switching   off   the   engine,   you   can  
e

ngage   position   P or N   to   place   the   gearbox   in  
neu

tral.
In
 
both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle,   unless   it   is   programmed  
t

o
 
automatic   mode.
Driving

188
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Hill start assist
On an ascending slope, with the vehicle
stationar y, the vehicle is held for a brief
moment when you release the brake pedal:
- 
i
f   you   are   in   first   gear   or   neutral   with   a  
m

anual
 g
earbox,
-

i
f you are in position A or M with an
electronic
 ge

arbox,
-

i
f you are in position D or M with an
automatic
  gearbox.
Operation
On a descending slope, with the vehicle
stationary and reverse gear engaged, the
vehicle is held for a brief moment when you
release the brake pedal.
Operating fault
If a fault occurs with the system, these warning lamps   come   on.   Contact   a   CITROËN   dealer  
o

r   a   qualified   workshop   to   have   the   system  
c

hecked.
System
 
which
 
keeps
 
your
 
vehicle
 
immobilised
 
t

emporarily
 
(approximately
 
2
 
seconds)
 
when
 
s

tarting
 
on
 
a
 
gradient,
 
the
 
time
 
it
 
takes
 
to
 
m

ove
 
your
 
foot
 
from
 
the
 
brake
 
pedal
 
to
 
the
 
a

ccelerator
 ped

al.
This
 
function
 
is
 
only
 
active
 
when:
-
 
t

he
 
vehicle
 
is
 
completely
 
stationary,
 
with
 
y

our
 
foot
 
on
 
the
 
brake
 
pedal,
-
 
w

hen
 
certain
 
conditions
 
of
 
gradient
 
are
 
m

et,
-
 
w

ith
 
the
 
driver’s
 
door
 
closed.
The hill start assist function cannot be
deactivated.
Do
 
not
 
leave
 
the
 
vehicle
 
while
 
it
 
is
 
being
 
h

eld
 
in
 
the
 
hill
 
start
 
assist
 
phase.
If you need to leave the vehicle while
the
 
engine
 
is
 
running,
 
apply
 
the
 
parking
 b
rake
 
manually
 
then
 
ensure
 
that
 
the
 p
arking
 
brake
 
warning
 
lamp
 
is
 
on
 
(not
 
f

lashing)
 
in
 
the
 
instrument
 
panel.
driving

189
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Gear shift indicator*
Depending on the driving situation and your vehicle's   equipment,   the   system   may   advise  
y

ou   to   skip   one   (or   more)   gear(s).   You   can  
f

ollow   this   instruction   without   engaging   the  
i

ntermediate
 g
ears.
The
  gear   engagement   recommendations   must  
n

ot   be   considered   compulsory.   In   fact,   the  
c

onfiguration   of   the   road,   the   amount   of   traffic  
a

nd   safety   remain   determining   factors   when  
c

hoosing   the   best   gear.   Therefore,   the   driver  
r

emains   responsible   for   deciding   whether   or   not  
t

o   follow   the   advice   given   by   the   system.
This
  function   cannot   be   deactivated. -
 
Y
ou   press   the   accelerator   pedal.
Example:
-
 Y ou   are   in   third   gear.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
The
  information   appears   in   the   instrument  p
anel   in   the   form   of   an   arrow.
System
  which   reduces   fuel   consumption   by   recommending   the   most   appropriate   gear.
With   an   electronic   or   automatic   gearbox,   the  
s

ystem   is   only   active   in   manual   mode.
*
  Depending   on   engine. On
  vehicle   fitted   with   a   manual   gearbox,  
t

he   arrow   may   be   accompanied   by   the   gear  
re

commended.The
  system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load, ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear,
Operation
On BlueHDi Diesel versions with manual gearbox,  t he  s ystem  m ay  s uggest  c hanging  i nto  
n

eutral   so   that   the   engine   can   go   into   standby  
(

STOP   mode   with   Stop   &   Start),   in   certain  
d

riving   conditions.   In   this   case,   N is displayed
in
  the   instrument   panel.
9
driving

192
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral and release the clutch pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an electronic gearbox , at a speed
below
  5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "   START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes for a few seconds, then
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
driving