light Citroen C4 2015 2.G Workshop Manual

227
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Recommendations on storage Procedure
F Switch  off   the   ignition   and   remove   the  k
ey,   or   if   your   vehicle   has   one,   press   the  
S

TART/STOP   button   to   switch   off   the  
e

ngine. F

R
aise the boot floor for access to the
a

d
blu
e
® tank. S
ecure
 
the   boot   floor   by   attaching   its   cord  
t

o
 
the
 
hook   on   the   parcel   shelf   support.
F
 
U

nclip
 
the   black   plastic   blanking   plug   using  
i

ts
 
tab.
F
 
I

nsert
 
your   fingers   into   the   aperture   and  
t

urn
 
the
 
blue   cap   a   6
th of a turn anti-
clockwise.
F
 
C

arefully
 
lift
 
off
 
the
 
cap,   without   dropping   it.
ne

ver store bottles of
a
dbl

ue
® in your
vehicle. Before
  topping-up,   ensure   that   the   vehicle   is  
p

arked   on   a   flat   and   level   sur face.
In wintry conditions, ensure that the
temperature   of   the   vehicle   is   above   -11°C.  
O

ther wise,   by   freezing,   the   AdBlue
® cannot
be
 
poured
 
into
 
its
 
tank.
 
Park
 
your
 
vehicle   in   a  
w

armer
 
area
 
for
 
a
 
few
 
hours
 
to
 
allow   the   top-up  
t

o
 
be
 
carried
 
out.
a

d
blu

e
® freezes at about -11°C and d
eteriorates   above   25°C.   It   is   recommended  
t

hat bottles be stored in a cool area and
protected
  from   direct   sunlight.
Under
 
these   conditions,   the   additive   can   be  
k

ept
 
for
 
at   least   a   year.
If the additive has frozen, can be used once it
has
 
completely   thawed   out.
10
Checks

243
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
F Remove  the   air   deflector   by   unclipping  e
ach   of   its   three   attachment   points.
F
 
U
nclip   the   bonnet   release   cable   at   its  
two
  fixings.
F
 
M
ove   the   cable   down.
After
  changing   the   failed   bulb,   remember   to  
p

ut   everything   back   in   place   (cable   and   air  
d

eflector).
Depending
  on   the   engine   and   only   on   the   left  
h

and   side,   you   must   first   carry   out   the   following  
o

perations for access to the protective covers
on   the   bulbs.
Access to bulbs
Model with halogen headlamps
and LED light signature* (type 2)
1. Direction indicators (LEDs).
2. Daytime running lamps / sidelamps (LEDs).3. Dipped beam headlamps (H7).
4. M
ain beam headlamps (H7).
5.
F

o g l a m p s ( H11) .
Bulbs
  with   lugs,   type   H1,   H7...   take   care  
t

o   position   them   correctly   to   ensure   the  
b

est
 l
ighting.
Model with halogen headlamps
(t y p e 1)
1. Direction indicators (H21 clear).
2. Dipped beam headlamps (H7).
3.
M

ain beam headlamps (H1).
4.
D

aytime running lamps / sidelamps
(P21/5W XL).
5.
F

o g l a m p s ( H11) .Bulbs
  with   lugs,   type   H1,   H7...   take   care  
t

o   position   them   correctly   to   ensure   the  
b

est
 l
ighting.
*
  LED:   light   emitting   diodes.
11
Practical information

247
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Changing foglamp bulbs
F Introduce a flat screwdriver in the hole in the f inisher.
F
 
P
ull   and   lever   to   unclip   the   bumper   finisher  
(

the   parking   sensor   stays   with   the   finisher).
F
 
R
emove   the   two   module   fixing   screws   and
 r

emove   it   from   its   housing.
F
 
D
isconnect   the   bulb   holder   connector.
F
 
T
urn   the   bulb   holder   a   quarter   of   a   turn   and  
e

xtract   it.
F
 
P
ull   the   bulb   and   change   it.
To refit, carry out these operations in reverse
o r d e r.
To
  replace   these   bulbs   you   may   also   contact   a
 C

ITROËN   dealer   or   a   qualified   workshop.
Changing the side spotlamps
(LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Changing integrated direction
indicator side repeaters
F Insert a flat screwdriver towards the centre of the repeater between the repeater and
the
  base   of   the   mirror.
F
 
T
ilt   the   flat   screwdriver   to   extract   the  
r

epeater   and   remove   it.
F
 
D
isconnect   the   repeater   connector.
To
  reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   obtain   replacement   repeaters.
11
Practical information

250
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
To facilitate the removal of the lamp, carry out this   operation   with   the   tailgate   half   open.
F

I
nsert a thin screwdriver into the lens
cutout.
F
 
P
ush   it   outwards.
F
 
R
emove   the   lens.
F
 
C
hange   the   faulty   bulb.
To
  refit,   press   on   the   lens   to   clip   it   in   place.
Third brake lamp (LEDs)
For the replacement of this type of light emitting diode   lamp,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Number plate lamps (W5W)
Practical information

253
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Dashboard fuses
Access to the fuses
F Refer  to   the   paragraph   "Access   to   the   tools".
Fuse tables
Fusebox 1
Fuse N° Rating Functions
F8 3 AAlarm
 s

iren,
 alar
m
 E
CU.
F13 10 A12
  V   socket.
F14 10 A12
  V   socket   in   boot.
F16 3 ALighting
  for   the   large   multifunctional   storage   unit,   rear   map  
r

eading   lamps,   glove   box   illumination.
F17 3 ASun
  visor   illumination,   front   map   reading   lamps.
F28 15 AAudio
  system,   radio   (after-market).
F30 20 ARear
  wiper.
F32 10 AHi-Fi
  amplifier.
The
 
fuseboxes
 
are
 
located
 
in
 
the
 
lower
 d
ashboard
 
(left-hand
 
side).
11
Practical information

266
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
F If  the   warning   lamp   and   the  S
TOP  warning   lamp   come   on,  
s

top the vehicle and switch off
the
  engine   as   soon   as   possible.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Ty r e s
F Check   the   tyre   pressures   of   the  
towing   vehicle   and   of   the   trailer,   observing  
t

he
 re
commended
 p
ressures.
Lighting
F Check  the   electrical   lighting   and   signalling  o
n   the   trailer.
The
  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
Cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   
c
oolant  
t

emperature.
Practical information

268
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
Before each use
Check that the towball is correctly fitted by verifying the following points:
-  t he   towball   is   correctly   locked   in   place   (position   A),
-
 
t
he   security   key   lock   is   on   and   the   key   removed;   the   locking   wheel   can   no   longer   be  
ope

rated,
-
 
t
he   towball   must   no   longer   move   at   all   in   its   carrier;   try   to   shake   it   by   hand.
During use
Never unlock the device when a trailer or load carrier is fitted to the towball.
N ever   exceed   the   maximum   authorised   weight   for   the   vehicle   plus   trailer   (Gross   Train  
W

eight   -   GTW).
After use
For journeys made without a trailer or load carrier, the trailer harness socket must be folded away,   the   towball   removed   and    the   blanking   plug   inserted   in   the   carrier.   This   measure  
a

pplies   particularly   if   the   towball   could   hinder   visibility   of   the   number   plate   or   lighting.
Practical information

277
C4-2_en_Chap12_caracteristique_ed01-2015
C4-2_en_Chap12_caracteristique_ed01-2015
* The kerb weight is equal to the unladen weight + driver (75 kg).
* *   T he   weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.  
Warning:
  towing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
Petrol weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each   additional   1   000   metres   of   altitude.
When
  towing,   the   maximum   authorised   speed   is   reduced   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
Petrol engine
VTi 95Puretech 110 V Ti 120
Gearbox Manual

(5 - speed) Manual

(5 - speed) Manual

(5 - speed) Automatic

(4 - speed)
Model code:
NC... 8FR0HNZ6
HNZ6/1 -/2 5FS05FS9

5FS9/D
-  
U
nladen   weight
1 2001 200 1 205 1   270
-  
K
erb   weight*
1   275
1   275
1   280
1   345
-  
G
ross   vehicle   weight   (GV W)
1   720
1   770
1   765
1   755
-  
G
ross   train   weight   (GTW)  

o
n   a   12   %   gradient
2   920
2   970
3   065
3   055
-  
B
raked   trailer   (within   the   GTW   limit)  

o
n   a   12   %   gradient
1 200
1 2001   300
1   300
-  
B
raked   trailer**   (with   load   transfer   within   the  
G

TW   limit)
1 450
1 4501 550 1 550
-  
U
nbraked   trailer
635635640 670
-  
R
ecommended   nose   weight
75757575
12
Technical data

278
C4-2_en_Chap12_caracteristique_ed01-2015
C4-2_en_Chap12_caracteristique_ed01-2015
* The kerb weight is equal to the unladen weight  + driver (75 kg).
* *   T he   weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.  
Warning:
  towing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
The
  GTW   and   towed   load   values   indicated   are   valid   up   to   a   maximum   altitude   of   1   000   metres;   the   towed   load   mentioned   must   be   reduced   by   10   %   for  
e

ach   additional   1   000   metres   of   altitude.
When
  towing,   the   maximum   authorised   speed   is   reduced   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
Petrol engine
Puretech 130 S&S THP 155
Gearbox Manual

(6- speed) EAT6 Automatic
(6- speed) ETG6 Electronic

(6- speed)
Model code:
NC... HNYM/S
HNYM/1S HNY T/S
HNY T/1S - /2S 5FV8/P
-  
U
nladen   weight
1 2051 240 1   275
-  
K
erb   weight*
1   280
1   315
1   350
-  
G
ross   vehicle   weight   (GV W
1   790
1   810
1   805
-  
G
ross   train   weight   (GTW)  
 
o
n   a   12%   gradient
3   090
3   110
3   205
-  
B
raked   trailer   (within   the   GTW   limit)  
 
o
n   a   12%   gradient
1   300
1   300
1 400
-  
B
raked   trailer**   (with   load   transfer   within  
t

he GTW   limit)
1 550
1 550 1   650
-  
U
nbraked   trailer
640655 675
-  
R
ecommended   nose   weight
757575
Technical data

281
C4-2_en_Chap12_caracteristique_ed01-2015
C4-2_en_Chap12_caracteristique_ed01-2015
* The kerb weight is equal to the unladen weight + driver (75 kg).
* *   T he   weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.   Warning:  
t

owing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
Diesel weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each   additional   1   000   metres   of   altitude.
When
  towing,   the   maximum   authorised   speed   is   reduced   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
Diesel engine
HDi 90HDi 90 FAP BlueHDi 100 e-HDi 115
Gearbox Manual

(5 - speed) Manual

(5 - speed) Manual

(6- speed) Manual

(6- speed)
Model code:
NC... 9HJC

9HJC/1 9HP0BHY6
BHY6/1 BHY6/2S 9HD8/S

9HD8/1S 9HD8/2S
-  
U
nladen   weight
1   248
1 205 1 200 1 2051   280
1   280
-  
K
erb   weight*
1   323
1   280
1   275
1   280
1   355
1   355
-  
G
ross   vehicle   weight   (GV W)
1   745
1   790
1   830 1   840
1   820
1   820
-  
G
ross   train   weight   (GTW)  
 
o
n   a   12   %   gradient
2 545
2   890
3   130
3   140
3   120
2 220
-  
B
raked   trailer   (within   GTW   limit)
 o

n   12   %   gradient
800
1 10 0 1   300 1   300 1   300
400
-  
B
raked   trailer**   (with   load   transfer  
w

ith the GTW   limit)
1 050
1   350
1 550 1 550 1 550 600
-  
U
nbraked   trailer
640640 635640 670400
-  
R
ecommended   nose   weight
757575757575
12
Technical data