jump cable Citroen C4 2016 2.G Owner's Manual

266
C4-2_en_Chap08_en-cas-de-panne_ed02-2015
When your vehicle's battery is discharged, the engine   can   be   started   using   a   slave   battery  
(

external   or   on   another   vehicle)   and   jump   lead  
c

ables.
Starting using another
battery
First check that the slave battery has a n ominal   voltage   of   12   V   and   a   capacity  
a

t   least   equal   to   that   of   the   discharged  
b

attery.
Do
  not   try   to   start   the   engine   by  
c

onnecting   a   battery   charger.
Do
  not   disconnect   the   (+)   terminal   when  
t

he   engine   is   running. F
 
S
tart   the   engine   of   the   vehicle   with   the  
g

ood   battery   and   leave   it   running   for   a   few  
m

inutes.
F  
O
perate   the   starter   on   the   broken   down  
v

ehicle   and   let   the   engine   run. I
f   the   engine   does   not   start   straight   away,  s
witch   off   the   ignition   and   wait   a   few  
m

oments   before   trying   again.
F
 
R
emove   the   plastic   cover   from  
the
  (+)   terminal,   if   your   vehicle   has   one.
F

C
onnect the red cable to the positive
terminal
  (+)   of   the   flat   battery   A, then to the
positive
  terminal   (+)   of   the   slave   battery   B.
F
 
C
onnect   one   end   of   the   green   or   black  
c

able   to   the   negative   terminal   (-)   of   the  
s

lave battery B   (or   earth   point   on   the   other  
v

ehicle).
F
 
C
onnect  
t
he  
o
ther  
e
nd  
o
f  
t
he  
g
reen  
o
r  
b
lack  
c

able to the earth point C   on   the   broken  
d

own   vehicle   (or   on   the   engine   mounting).F
 
W
ait   until   the   engine   returns   to   idle   then  
d

isconnect   the   jump   lead   cables   in   the  
r

everse
 o
rder.
F
 
R
efit   the   plastic   cover   to   the   (+)   terminal,   if  
y

our   vehicle   has   one.
In the event of a breakdown