sensor Citroen C4 AIRCROSS 2012 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2012, Model line: C4 AIRCROSS, Model: Citroen C4 AIRCROSS 2012 1.GPages: 332, PDF Size: 9.07 MB
Page 131 of 332

129
4
Driving
   
 Visual assistance 
Front par king sensors 
Deactivation / Activation of thefront and rear parking sensors
The function is deactivated by pressing this
button. The indicator lamp in the button goes
off. 
Pressing this button again reactivates the
function. The indicator lamp in the button
comes on.
   
Operating fault
 
The front parking sensors are triggered when
an obstacle is detected in front, a gear isengaged (position Dfor vehicles with a CVT gearbox) and the speed of the vehicle remains
below 6 mph (10 km/h).
  The front parking sensors are interrupted if 
the vehicle stops for more than five seconds 
in for ward 
gear, if no fur ther obstacles are
detected or when the speed of the vehicle 
exceeds 6 mph (10 km/h).
Remember to deactivate the system if towing a trailer or caravan.  
 
 
 
In bad weather or in winter, ensure thatthe sensors are not covered with mud, ice or snow.  When the vehicle is moving at a speed below 6 mph (10 km/h), cer tain soundsources (motorcycle, lorry, pneumatic drill, etc.) may trigger the audible signals of the parking sensor system.  
    In the event o
f an problem, when reverse gear 
is engaged this lamp in the button flashes,
accompanied by an audible signal.This supplements the audiblesignal by displaying bars in the screen, in front of or behind the 
vehicle.If one of the sensors is fault
y, it 
flashes in the instrument panel 
screen. 
  Contact a CITROËN dealer or a 
qualified 
workshop.   Th
ese bars flash at the start of the manoeuvrethen become fixed from a certain distance between the vehicle and the obstacle. 
Page 132 of 332

130
Driving
   
 
 
 
 
Reversing camera 
Linked with the navigation option, the reversing camera complements the parking sensor system and is activated automatically whenreverse gear is engaged.The colour ima
ge is provided on the navigation screen with indication of the limit of the rear 
bumper and of the general direction of the
vehicle.   
Page 136 of 332

134
Visibility
The sensitivity of the automatic illuminationof headlamps can be configured via the colour screen "Equipment" menu.  
In foggy weather or in snow, thesunshine sensor may detect sufficient light. The lighting will not come on automatically. Do not cover the sunshine sensor, the
associated functions will no longer becontrolled.
Automatic switching off 
 When the lighting control stalk is at "dipped or main beam headlamps", if the ignition switch 
is at "LOCK" or "ACC" or if the key has been
removed from the ignition switch, the lamps switch off automatically when the driver's 
door is opened . 
 
Daytime running lamps 
Daytime lighting which comes on automatically 
when the engine is star ted making the vehicle 
more visible to other users.
This 
function is assured by special lamps.
The lighting control stalk must be placed in 
position  "0" 
 or  "AU TO "(day mode).  
 
Automatic illumination of headlamps
 The sidelamps and the dipped beam headlamps come
on automatically, without any action on the par t of the
driver, if a low level of exterior light is detected or if the 
wipers are switched on. 
  When the li
ght returns to a sufficient level or the wipers 
are switched off, the lighting is switched off automatically. 
  The sensor is located at the base of the windscreen.
  Contact a CITROËN dealer or a qualified workshop to 
adjust the sensitivity of the sensor. 
Page 141 of 332

139
5
Visibility
 Certain windscreen wiper functions(intermittent operation, ...) can beconfigured via the colour screen"Equipment" menu.
   
Manual controls
 
 
Windscreen wipers
B. 
intermittent operation or rain sensor sensitivity adjustment ring. 
Windscreen wash 
Pull the wiper stalk towards you. Thewindscreen wash then the wipers operate for aset time. The headlamp wash is also activated  if the 
dipped beam headlamps are on.
 
 
Headlamp wash
 
Press the end of the lighting stalk to activate 
the headlamp wash, when the dipped beam 
headlamps are on. sin
gle wipe. 
park.
intermittent 
(the speed can be set
manually).
or 
automat
ic rain sensitive wipers(the speed can be set manually).
slow.
f
ast.  
  A
.wiping speed selection stalk: 
Y
ou can increase or decrease:
-  the wiping frequency when the intermittent 
mode is active,-   the sensitivity of the rain sensor when theautomatic mode is active.
   
 
-  "+": high sensitivity.
   
-   "-": low sensitivity.
 
 
To reduce the consumption of screenwash fluid, the headlampwashers only operate with the firstoperation of the screenwash. 
Page 142 of 332

140
Visibility
Automatic rain sensitive
wipers 
The windscreen wipers operate automatically,
without any action on the par t of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of 
the rainfall. 
   
Operating fault 
 
Do not cover the rain sensor, linked with the sunshine sensor and located in the centre of 
the windscreen behind the rear view mirror. 
Activation 
 )Move the stalk A   to the "AUTO" 
 position.  
 
 Switch off the automatic rain sensitivewipers when using an automatic car wash. 
To protect the rubber of the wiper, it is advisable to deactivate the automaticmode when the vehicle is parked and when the ambient temperature isbelow 0 ° C.  
In winter, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers.  
 
 
 
Deactivation 
 ) 
 Move the stalk  Ato the  "OFF" 
 position.