manual radio set Citroen C4 AIRCROSS 2014 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2014, Model line: C4 AIRCROSS, Model: Citroen C4 AIRCROSS 2014 1.GPages: 368, PDF Size: 20.37 MB
Page 281 of 368
279
05
Press the AUDIO
button.
By default the screen displays the stations on FM1.
Selecting an FM station and presetting
Press SEEK TRACK
for a manual search up or
down. The frequency is modifi ed in step of 0.1 MHz.
Press and hold to fi nd a station automatically.
Press " Scan
" to search for stations that can be
received in the current location, until a station is
found.
You can also start a search by type of programme by
pressing " PTY Filter
".
Press " RDS Settings
".
Press " On
" or " Off
" to activate or deactivate the
functions:
- " AF Check
": automatic search for the best
frequency,
- " Reg
": switch to the regional frequencies.
Once the frequency has been selected, a long press
on the station until a "Beep" is heard will preset it.
The name of the station is displayed if it is available.
RDS settings
Press the AUDIO
button.
By default the screen displays the stations on FM1.
Turn the FOLDER / TUNE SOUND
knob to select a
station.
RADIO
Page 317 of 368
315
01 FIRST STEPS
Fast back / forwards.
PTY On / Off.
Play the fi rst 10 seconds
of each track in the current
folder.
Selection:
- automatically of the next
radio frequency down /
up.
- of the previous / next
track.
Select previous / next folder (or track).
Adjust audio settings.
Manual search up and down for a radio station / PTY.
Function setting mode (AF, REG, TP, SCV, ...).
Press: select folder (or track).
Search for TP traffi c
information.
Play / pause the current track.
Abandon the current
operation, up one level.
Change to MENU
mode.
Page 321 of 368
319
04 RADIO
Selecting radio source
Press the RADIO
button to switch on
the radio.
Press the RADIO
button repeatedly
to select the waveband; it changes in
the following order: FM1 / FM2 / FM3 /
MW / LW / FM1...
Automatic station search
Manual station search
Turn the SEL
knob to the left to search
the lower frequencies or to the right to
search the higher frequencies.
Press the "
" or "
" button to search
the lower frequencies or the higher
frequencies respectively.
The search begins automatically and
stops at the fi rst station found.
Selecting the waveband
Selection / Presetting
Page 322 of 368
320
04
Press one of the six buttons "1" to "6" until an
audible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
The number of the button and the associated radio
frequency appear in the screen.
Manual station presetting
To recall the pre-set stored setting, press the button and release it
within two seconds.
RADIO
You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
Automatic station presetting
Disconnecting the battery terminals clears the preset radio stations.
Stations can only be preset automatically on wavebands FM1, FM2
and FM3.
Presetting new stations replaces the previous stations.
This presetting can be activated automatically irrespective of the
waveband selected.
Press the RADIO
button for more than
two seconds.
The six stations offering the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.
Recalling preset stations
Press one of the six buttons "1" to "6". The station
corresponding to the waveband selected appears on
the screen.