ECO mode Citroen C4 AIRCROSS RHD 2014 1.G Owner's Manual

We draw your attention to the following...
Key

safety warning

additional information


contributes to the protection of the environment


refer to the page indicated The "Familiarisation" section at the start of this
document is intended as a quick way of getting
to know your vehicle. Reading the detailed
sections is essential to make the most of your
vehicle, in complete safety.
Your vehicle is fitted with only some of the
equipment described in this document,
depending on the trim level, version and the
specifications for the country in which it is sold.
The fitting of electrical equipment or
accessories which are not recommended
by CITROËN may result in a failure of your
vehicle's electronic system. Please note this
specific warning and contact a CITROËN
dealer to be shown the recommended
equipment and accessories.

CITROËN has a presence on every continent,
a complete product range,
bringing together technology and a permanent spirit of innovation,
for a modern and creative approach to mobility.
We thank you and congratulate you on your choice.


Happy motoring!


At the wheel of your new vehicle,
getting to know each system,
each control, each setting,
makes your trips, your journeys
more comfortable and more enjoyable.

18
Familiarisation
Monitoring



A.
Manual headlamp adjustment.


Side switch panel



1.
Open the glove box.

2.
Insert the key.

3.
Select the position:

"OFF"
(deactivation), with "rear facing" child seat,
"ON"
(activation), with front passenger or
"for wards facing" child seat.

4.
Remove the key keeping the switch in the
new position.



Passenger's front airbag


B.
Deactivation of the ASC/ TCL system.

C.
Deactivation of the parking sensors.

Passenger safety


D.
Deactivation of the Stop & Start
(Auto Stop & Go) function.


Starting



- Position 1: LOCK


- Position 2: ACC


- Position 3: ON


- Position 4: START



Each press on the START/STOP
button,
without action on the pedals, changes the
mode of the vehicle.


- First press: ACC mode


- Second press: ON
mode


- Third press: OFF mode





Ignition switch

START/STOP button
139
15 0
131
122157108
109

20
Familiarisation
Driving


Stop & Start
(Auto Stop & Go) function

Engine going into STOP mode

The "AS &G"
warning lamp comes on in
the instrument panel or the instrument
panel screen and the engine is put into
standby after a few seconds:

Engine going into START mode

Deactivation / Reactivation

You can deactivate the system at any time
by pressing the "AS &G O FF "
button; the
corresponding warning lamp comes on in the
instrument panel or the instrument panel screen.
The system is reactivated automatically
every time you start the engine with the
key or with the START/STOP button.
The "AS &G"
warning lamp goes off
and the engine restarts automatically:


- with a manual gearbox; when you fully

depress the clutch pedal.


- with a manual gearbox;
with the vehicle
stationary and your foot on the brake
pedal, when you put the gear lever into
neutral and release the clutch pedal. In certain condition, START mode may engage
automatically; the "AS &G"
warning lamp
flashes then goes off.
In certain circumstances the STOP mode may
not be available; the "AS &G"
warning lamp
flashes for a few seconds then goes off.
121122
122

.
21
Familiarisation
Driving

Three transmission modes are available and
selectable manually by the driver according to
requirements:


A.
Two wheel drive (2WD),

B.
Four wheel drive (4WD AUTO),

C.
Four wheel drive (4WD LOCK).



Four wheel drive system



1.
" ON / OFF
" button: switches cruise control
on and off.

2.
" COAST SET
" button: programme a driving
speed then decrease the cruise speed.

3.
" ACC RES
": increase the cruise speed,
and recall the programmed speed.

4.
" CANCEL
" button: cruise control off.


Cruise control "CRUISE"

In order to be programmed or activated, the
vehicle speed must be higher than 25 mph
(40 km/h), with at least second gear engaged. 124
126

22
Familiarisation


















































Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.


Optimise the use of your gearbox


With a manual gearbox, move off gently and change up without waiting.
During acceleration change up early.

With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.

The gear shift indicator invites you to change up: as soon as the
indication to change up is displayed in the instrument panel, follow it
straight away.
With an electronic or automatic gearbox, this indicator appears only in
manual mode.



Drive smoothly


Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and
CO
2 emissions and also helps reduce the background traffic noise.


Control the use of your electrical
equipment

Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down (sunroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.

Switch off the headlamps and front foglamps when the level of light
does not require their use.

Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.

As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.

If your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.

24
Monitoring

















Instrument panel




1.
Rev counter.

2.
Speedometer.
Screen type 2
3.
Instrument panel display screen:


- Warning and status displays.

- Total and trip distance recorders.

- Ser vice indicator.

- Coolant temperature.

- Trip computer information.

- Cruise control setting.

- Gear shift indicator recommendations.

- Settings menu (display, sound...).

- Fuel level.

- Ambient temperature.

- Transmission mode.

Panel grouping together the dials and warning/
indicator lamps. These inform the driver of the
activation/deactivation of a system or of the
occurrence of a fault.
Screen type 1

Management of the display is done using
the INFO
button located on the dashboard
to the right of the instrument panel.

1
29
Monitoring


Warning lamp



is on



Cause



Action / Observations






Cruise control


fixed This comes on when the cruise
control has been activated. Press the "ON/OFF" button to activate/deactivate the
cruise control.

Active stability
control and
traction control
(ASC/TCL)
flashing. Operation of the ASC/ TCL systems. The systems optimise traction and improve the
directional stability of the vehicle.
Adapt your driving and moderate your speed.
fixed. Fault in the ASC/ TCL systems. Have it checked by a CITROËN dealer or a qualified
workshop.



Stop & Star t
(Auto Stop & Go)
function

fixed. When the vehicle stops (red lights,
traffic jams, ...) the Stop & Start
(AS&G) function has put the engine
into STOP mode. The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.

flashes for a few
seconds, then goes
off. STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically. See "Stop & Start (AS&G) function" for special cases
with STOP mode and START mode.



Diesel engine
pre-heating


fixed. The engine is cold and:


- the ignition switch is at the ON

position (ignition on), or

- the START/STOP
starting button
has been pressed (ignition on). With key starting, wait until the warning lamp has gone
off before starting.
With the Keyless Entry and Starting system, the engine
will only start after the warning lamp has gone off.
The duration for which the warning lamp is on is
determined by the climatic conditions (up to 30 seconds
in severe weather).
If the engine does not start, switch the ignition off and
then on again and wait again until the warning lamp
goes off, then start the engine.

1
47
Monitoring

Average fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated
since the trip computer was
last reset.


Average speed
(km/h or mph)
This is the average speed
calculated since the trip
computer was last reset.


Current fuel consumption
(l/100 km or km/l or mpg)
This is the average fuel
consumption calculated over
the last few seconds.

This value may change following a
change in the style of driving or the relief.


If dashes "- - -" are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer or a
qualified workshop.




Resetting the information to zero

When the required information is displayed,
press the INFO
button for more than
two seconds to reset all of the information to
zero.
When the ignition is switched on, the zero reset
switches automatically from manual mode to
automatic mode.


Automatic

If the ignition key remains in the OFF position
for more than 4 hours, the information is reset
to zero automatically.

48
Monitoring
The various menus may change between the type 1
instrument panel and the type 2 instrument panel.

Adjusting vehicle settings


When the vehicle is
stationary
, it allows the
user to change the following
settings:


- the reset mode
for average fuel
consumption and
average speed,

)
Press and hold the INFO
button for a few
seconds to display the menu screen.

)
In the menu screen, press the INFO
button
to select a function from the list:

- the fuel consumption units,

- the temperature display unit,

- the display language,

- activation/deactivation of the sound when
pressing the INFO
button,

- the rest reminder display inter val,

- restore the factory settings.
To change the settings, you must stop
the vehicle and switch on the ignition.
Apply the parking brake and place the
gear lever in neutral.
With the ignition on
, press the INFO
button
on the dashboard, to the right of the instrument
panel, several times in succession until the
"SETTINGS MENU" screen is displayed.


Operation


MENU
1/3
:



- 1 - 2, A - M, A - P

* (choice of the type of
reset of average fuel consumption and
average speed),

- AVG UN I T
(choice of the fuel consumption
units),

- choice of the temperature display unit
,

- LANGUAGE
(option of the display
language),


*
According to display language.
For your safety, when the vehicle is
moving
, the function settings are not
displayed when you press the INFO

button.

1
49
Monitoring

MENU
2/3:



- a/b
(option of displaying a different
language in the instrument panel screen
and the navigation screen),

- activation / deactivation of the INFO

button sound
,

- ALERT
(changing of the "REST
REMINDER" display inter val),

- selection of the sound
of the direction
indicators,

- activation / deactivation of the current
fuel consumption
,
Press and hold the INFO
button for a
few seconds to return to the previous
screen.
When the menu screen is displayed,
if no operation is carried out within
15 seconds, the Settings Menu screen
is displayed.

MENU 3/3:



- RESET
(restore factory settings).




Choice of the reset mode for
average fuel consumption and
average speed
You can choose between two average fuel
consumption and average speed reset modes:


- automatic reset,

- manual reset.
In the menu screen:


)
press the INFO
button to select:

)
press and hold the INFO
button for a
few seconds to switch in succession from
reset mode 1
- A (automatic) *
to reset
mode 2 - M - P (manual) *
.
The mode selected is confirmed.



*
According to display language.