stop start Citroen C4 CACTUS 2016 1.G Owner's Guide

161
Load reduction mode
System which manages the use of certain functions   according   to   the   level   of   charge  
r

emaining   in   the   battery.
When
  the   vehicle   is   being   driven,   the   load  
r

eduction   function   temporarily   deactivates  
c

ertain   functions,   such   as   the   air   conditioning,  
t

he   heated   rear   screen...
The
  deactivated   functions   are   reactivated  
a

utomatically   as   soon   as   conditions   permit.System
  which   manages   the   duration   of   use   of  c
ertain functions to conserve a sufficient level
of
  charge   in   the   battery.
After
  the   engine   has   stopped,   you   can  
s

till   use   functions   such   as   the   audio   and  
t

elematics   system, windscreen   wipers,   dipped  
b

eam   headlamps, courtesy   lamps,   etc.   for  
a

  maximum   combined   duration   of   about  
f

orty minutes.
Energy economy mode
Switching to economy mode
A message then appears in the instrument p
anel   screen   indicating   that   the   vehicle   has  
s

witched   to   economy   mode   and   the   active  
f

unctions   are   put   on   standby.
If
  a   telephone   call   is   being   made   at   this   time,   it  
w

ill   be   maintained   for   around   10   minutes   with  
t

he   Bluetooth   hands-free   system   of   your   audio  
s

ystem.
Exiting economy mode
These functions are reactivated automatically n ext   time   the   vehicle   is   driven.
In
  order   to   restore   the   use   of   these   functions  
i

mmediately,   start   the   engine   and   let   it   run:
-
 
f
or   less   than   ten   minutes,   to   use   the  
e

quipment   for   approximately   five   minutes,
-
 
f
or   more   than   ten   minutes,   to   use   the  
e

quipment   for   up   to   approximately  
t

hirty minutes.
Let
  the   engine   run   for   the   duration   specified   to  
e

nsure   that   the   battery   charge   is   sufficient.
Do
  not   repeatedly   and   continuously   restart   the  
e

ngine   in   order   to   charge   the   battery.
A
  flat   battery   prevents   the   engine   from  
s

tarting.
For
  more   information   on   the   battery,  
r

efer   to   the   corresponding   section.
7
Practical information

168
Bonnet
F Open  the   left   hand   front   door. The location of the interior bonnet
release
  lever   prevents   opening   of   the  
b

onnet   when   the   left   hand   front   door  
i

s   shut.
When   the   engine   is   hot,   handle   the  
e

xterior   safety   catch   and   the   stay   with  
c

are   (risk   of   burns),   using   the   protected  
a

rea.
When   the   bonnet   is   open,   take   care   not  
t

o   damage   the   safety   catch.
F  
L
ift   the   safety   catch   and   raise   the   bonnet.F
 U nclip   the   stay   from   its   housing   and   place  i
t   in   the   support   slot   to   hold   the   bonnet  
ope

n.
Opening
F Pull  the   release   lever,   located   at   the   bottom  o
f   the   door   aperture,   towards   you.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
Do
  not   open   the   bonnet   under   very  
wi

ndy
 c
onditions.
Closing
F Take  the   stay   out   of   its   support   slot.
F  C lip   the   stay   back   into   its   housing.
F
 
L
ower   the   bonnet   and   release   it   at   the   end  
o

f   its   travel.
F
 
P
ull   on   the   bonnet   to   check   that   it   has  
l

atched   correctly. Because of the presence of electrical
equipment
  under   the   bonnet,   it   is  
r

ecommended   that   exposure   to   water  
(

rain,   washing, ...)   be   limited.
Before
  doing   anything   under   the  
b

onnet, switch off the Stop & Start
system   to   avoid   any   risk   of   injury  
r

esulting   from   an   automatic   change   to  
S

TART   mode.
Practical information

174
Checks
12 V battery
The battery does not require any maintenance.
H owever,   check   regularly   that   the   terminals  
a

re   correctly   tightened   (versions   without   quick  
r

elease   terminals)   and   that   the   connections  
a

re   clean.Refer to the manufacturer's service   schedule   for   details   of   the  
r

eplacement   intervals   for   these  
c

omponents.
Air filter and passenger compartment filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice   schedule   for   details   of  
t

he   replacement   interval   for   this  
c

omponent.
Oil filter
Unless other wise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine.
O ther wise,   have   them   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
Depending
  on   the   environment   (e.g.   dusty  
a

tmosphere)   and   the   use   of   the   vehicle  
(e.g.
  city   driving),   replace them twice as often
if necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.
Particle filter (Diesel)
The start of saturation of the
particle  filter   is   indicated   by   the  
f

ixed   illumination   of   this   warning  
l

amp   accompanied   by   a   warning  
m

essage.
As
 
soon
 
as
  the   traffic   conditions   permit,  
r

egenerate
 
the   filter   by   driving   at   a   speed   of   at  
l

east
 
40
 
mph   (60   km/h)   until   the   warning   lamp  
g

oes
 
off.
If
 
the
 
warning   lamp   stays   on,   this   indicates   a  
l

ow
 
additive   level.
Refer
 
to
 
the   "Diesel   additive   level"   section.
On a new vehicle, the first particle
filter
 
regeneration   operations   may   be  
a

ccompanied   by   a   "burning"   smell,  
w

hich   is   per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle   at   very   low   speed   or   at   idle,  
y

ou
 
may,   in   exceptional   circumstances,  
n

otice   the   emission   of   water   vapour   at  
t

he
 
exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
 
the   environment.
When
 
carrying
 
out
 
any
 
operation
 
on
 
the
 
12
 
V
 
b

attery,
 
refer
 
to
 
the
 
corresponding
 
section
 
for
 
d

etails
 
of
 
the
 
precautions
 
to
 
be
 
taken
 
before
 
s

tarting
 
work.
Versions
 
equipped
 
with
 
Stop
 
&
 
Start
 
are
 
f

itted
 
with
 
a
 
12
 
V
 
lead-acid
 
battery
 
of
 
s

pecific
 t

echnology
 a

nd
 s

pecification.
Its
 
replacement
 
should
 
be
 
carried
 
out
 
o

nly
 

by
 

a
 

CITROËN
 

dealer
 

or
 

a
 

qualified
 w

orkshop.
Practical information

182
F Obtain  a   bottle   of   AdBlue®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
 Ad

Blue
® tank.
I
mportant :
 
if
 
your   vehicle's   AdBlue
®
tank
 
is
 
completely
 
empty
 
-
 
which
 
is
 
c

onfirmed
 
by
 
the
 
alert
 
messages
 
and  
t

he
 
impossibility
 
of
 
starting
 
the
 
engine,  
y

ou
 
must
 
add
 
at
 
least
 
3.8
 
litres
 
(so
 
t

wo 1.89
 
litre
 
bottles). If
  any   additive   is   split   or   splashed,   wash  
i

mmediately  
w
ith  
c
old  
w
ater  
o
r  
w
ipe  
w
ith  
a

  damp   cloth.
If   the   additive   has   crystallised,   clean   it  
o

ff   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up
after a breakdown because of a lack
of additive ,   signalled   by   the   message
 "

Top   up   emissions   additive:   Starting
 p

revented",   you   must   wait   around
 5

 minutes
 
before
 
switching
 
on
 
the
 
ignition,
 w

ithout opening the driver's door,
locking the vehicle or introducing the
key into the ignition switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
Never   dispose   of   AdBlue
® additive b
ottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 p

urpose
 o

r
 t

ake
 t

hem
 t
o
 y
our
 d
ealer.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth.
F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 
it
 
a
 
6th of a turn clockwise, to its stop.
F
 R
efit   the   black   cap   and   turn   it   a   quarter   of  
a

 
turn   clockwise   without   pressing.   Ensure  
t

hat   the   indicator   on   the   cap   lines   up   with  
t

he   indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel   and/or   the   storage   box   to   the   bottom  
o

f
  the   boot.
F
 
R

efit   the   boot   carpet   and   close   the   tailgate.
Practical information

208
Dashboard fuses
The two fuseboxes are placed in the lower dashboard,   at   the   glove   box. Fuse
N° Rating
(A) Functions
F01 10Brake   pedal   (switch   2),   Stop   &   Start.
F02 5Headlamp   beam   height   adjuster,   additional   heater   (Diesel),  
p

arking   sensors,   diagnostic   socket,   door   mirrors   (electric  
a

djustment),   Grip   Control.
F03 10Diesel   additive   pump,   electric   power   steering,   clutch   pedal  (
sw i tc h).
F04 5Rain
  and   sunshine   sensor.
F06 10Brake
  pedal   (switch   1),   diagnostic   socket.
F08 5Top
  of   steering   column   contacts   with   steering   mounted   controls.
F10 15Emergency
  call   /   Assistance   call.
F12 5Stop
  &   Start,   ABS,   ESC.
F13 5Parking
  sensors,   reversing   camera
F14 10Electronic
  gearbox,   switch   panel   (below   the   touch   screen  
t

ablet),   air   conditioning,   touch   screen   tablet.
F16 1512
  Volt   socket.
F18 20Radio.
Access to the fuses
F Unclip  the   cover   by   pulling   at   top   left,   then  r
ight.
Left hand fusebox
In the event of a breakdown

211
Engine compartment fuses
Access to the fuses
F Unclip  the   cover.
F  C hange   the   fuse   (see   corresponding  
par

agraph).
F
 
W
hen   you   have   finished,   close   the   cover  
c

arefully   to   ensure   correct   sealing   of   the  
f

usebox. Fuse
N° Rating
(A) Functions
F1 40Air
 c
onditioning.
F2 30 / 40Stop   &   Start.
F3 30Passenger
 c
ompartment
 f
usebox.
F4 70Passenger
 c
ompartment
 f
usebox.
F5 70Built-in   Systems   Inter face   (BSI).
F6 60Cooling   fan   assembly.
F7 80Built-in   Systems   Inter face   (BSI).
F8 15Engine
  management,   petrol   pump.
F9 15Engine
 m

anagement.
F10 15Engine
 m

anagement.
F11 20Engine
 m

anagement.
F12 5Cooling
  fan   assembly.
F13 5Built-in
  Systems   Inter face   (BSI).
F14 5Battery
  charge   unit   (non   Stop   &   Start   engine).
F15 5Stop
  &   Start.
F17 5Built-in
  Systems   Inter face   (BSI).
F18 10Right
  hand   main   beam   headlamp.
The
  fusebox   is   placed   in   the   engine  
c

ompartment   near   the   battery.
8
In the event of a breakdown

213
12 V battery
The battery is located under the bonnet.
T o   gain   access   to   it:
F
 
o
pen   the   bonnet   using   the   interior   release  
l

ever,   then   the   exterior   safety   catch,
F

s
ecure the bonnet stay,
F
 
l
ift   the   plastic   cover   on   the   (+)   terminal.
Access to the battery
Procedure for starting the engine using another battery or charging a discharged battery.
P rotect   your   eyes   and   face   before  
h

andling   the   battery.
All
  operations   on   the   battery   must   be  
c

arried   out   in   a   well   ventilated   area   and  
a

way   from   naked   flames   and   sources  
o

f   sparks,   so   as   to   avoid   the   risk   of  
e

xplosion   or   fire.
Wash
  your   hands   after wards.
Versions
  equipped   with   Stop   &   Start   are  
f

itted   with   a   12   V   lead-acid   battery   of  
s

pecific
 t
echnology
 a
nd
 s
pecification.
Its
  replacement   should   be   carried   out  
o

nly
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 w

orkshop.
General points
Lead-acid starter batteries
Batteries contain harmful substances such   as   sulphuric   acid   and   lead.
They
  must   be   disposed   of   in  
a

ccordance   with   regulations   and   must  
n

ot,   in   any   circumstances,   be   discarded  
w

ith   household   waste.
Take
  used   remote   control   batteries   and  
v

ehicle batteries to a special collection
point.
With
  an   electronic   gearbox,   do   not   try   to  
s

tart   the   engine   by   pushing   the   vehicle.The
  (-)   battery   terminal   is   not   accessible.
A
  remote   earth   point   is   located   on   the   right-
hand
  front   wing.
8
In the event of a breakdown

214
When your vehicle's battery is discharged, the engine   can   be   started   using   a   slave   battery  
(

external   or   on   another   vehicle)   and   jump   lead  
c

ables   or   a   battery   booster.
Starting using another battery
F Raise  the   plastic   cover   on   the   (+)   terminal,  i
f   your   vehicle   has   one.
F
 
C
onnect   the   red   cable   to   the   positive  
t

erminal   (+)   of   the   flat   battery   A (at
the
  metal   elbow)   then   to   the   positive  
t

erminal (+)   of   the   slave   battery   B or
the booster.
F
 
C
onnect   one   end   of   the   green   or   black  
c

able   to   the   negative   terminal   (-)   of   the  
s

lave battery B or the booster (or earth
point
  on   the   other   vehicle).
F
 
C
onnect  
t
he  
o
ther  
e
nd  
o
f  
t
he  
g
reen  
o
r  
b
lack  
c

able to the earth point C   on   the   broken  
d

own   vehicle. F
 
S
tart   the   engine   of   the   vehicle   with   the  
g

ood   battery   and   leave   it   running   for   a   few  
m

inutes.
F  
O
perate   the   starter   on   the   broken   down  
v

ehicle   and   let   the   engine   run.
If   the   engine   does   not   start   straight   away,  
s

witch   off   the   ignition   and   wait   a   few   moments  
b

efore   trying   again.
Never
 
try
 
to
 
start
 
the
 
engine
 
by
 
c

onnecting
 
a
 
battery
 
charger.
Never
 
use
 
a
 
24
 
V
 
or
 
higher
 
battery
 
b

o o s t e r.
First
 
check
 
that
 
the
 
slave
 
battery
 
has
 
a
 
n

ominal
 
voltage
 
of
 
12
 
V
 
and
 
a
 
capacity
 
a

t
 
least
 
equal
 
to
 
that
 
of
 
the
 
discharged
 
b

attery.
The
 
two
 
vehicles
 
must
 
not
 
be
 
in
 
contact
 w
ith
 
each
 
other.
Switch
 
off
 
the
 
electrical
 
consumers
 
on
 
b

oth
 
vehicles
 
(audio
 
system,
 
wipers,
 
l

ighting, ...).
Ensure
 
that
 
the
 
jump
 
lead
 
cables
 
do
 
n

ot
 
pass
 
close
 
to
 
moving
 
parts
 
of
 
the
 
e

ngine
 
(cooling
 
fan,
 
belts, ...).
Do
 
not
 
disconnect
 
the
 
(+)
 
terminal
 
when
 
t

he
 
engine
 
is
 
running. F
 
W
ait   until   the   engine   returns   to   idle   then  
d

isconnect   the   jump   lead   cables   in   the  
r

everse
 o
rder.
F  
R
efit   the   plastic   cover   to   the   (+)   terminal,   if  
y

our   vehicle   has   one.
F  A llow   the   engine   to   run   for   at   least  3
0 minutes,   by   driving   or   with   the   vehicle  
s

tationary, so that the battery reaches an
adequate
  state   of   charge.
Some
  functions,   including   Stop   &   Start,  
a

re not available if the battery is not
sufficiently
 c

harged.
In the event of a breakdown

216
Do not force the lever as locking will not   be   possible   if   the   clamp   is   not  
p

ositioned   correctly;   start   the   procedure  
ag

ain.
Quick release terminal
Disconnecting the (+) terminal
F Raise the lever A fully to release the clamp  B.
The
  Stop   &   Start   system   may   not   be  
o

perational   during   the   trip   following   the  
f

irst   engine   start.
In
  this   case,   the   system   will   only   be  
a

vailable   again   after   a   continuous  
p

eriod   of   immobilisation   of   the   vehicle,  
a

  period   which   depends   on   the   ambient  
t

emperature   and   the   state   of   charge   of  
t

he   battery   (up   to   about   8   hours).
It
 
is
 
recommended
 
that
 
the
 
battery
 
be
 
d

isconnected
 
if
 
the
 
vehicle
 
is
 
not
 
to
 
be
 
used
 
f

or
 
a
 
very
 
long
 
period,
 
so
 
as
 
to
 
maintain
 
an
 
a

dequate
 
state
 
of
 
charge
 
for
 
starting
 
the
 
e

ngine.
Before
 
disconnecting
 
the
 
battery:
F
 
c

lose
 
all
 
openings
 
(doors,
 
boot,
 
windows,
 
r

oof),
F
 
s

witch
 
off
 
all
 
electrical
 
consumers
 
(audio
 
s

ystem,
 
wipers,
 
lighting...),
F
 
s

witch
 
off
 
the
 
ignition
 
and
 
then
 
wait
 f
our minutes.
At
 
the
 
battery,
 
simply
 
detach
 
the
 
(+)
 
terminal.
Disconnecting the battery
Following reconnection of the battery, switch on t
he   ignition   and   wait   1   minute   before   starting   to  
p

ermit   initialisation   of   the   electronic   systems.  
H

owever,   if   problems   remain   following   this  
o

peration,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Referring
  to   the   corresponding   section,   you  
m

ust
 y
ourself
 r
einitialise
 (
depending
 o
n
 ve

rsion):
-
 
t
he   remote   control   key,
-
 ...
Following reconnection of the battery
Reconnecting the (+) terminal
F Position   the   open   clamp   B of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   down   on   the   clamp   to   position   it  
c

orrectly   on   the   battery   post.
F
 
L
ock   the   clamp   by   lowering   the   lever   A.
In the event of a breakdown

251
Level 1Level 2 Level 3 Comments
Navigation Settings
Navigation Enter destination
Display
  recent   destinations.
Route settings Fastest
Choose
  the   navigation   criteria.
The
  map   displays   the   route   chosen   according   to  
t

hese
 c
riteria.
Shortest
Time/distance
Ecological
To l l s
Ferries
Strict-Close
Show
  route   on   map Display   the   map   and   start   navigation.
Confirm Save
  the   options.
Save Save
  the   current   address.
Stop navigation Delete
  the   navigation   information.
Voice Choose
  the   volume   for   voice   and   announcement  
o

f   street   names.
Diversion Detour
  from   your   initial   route   by   a   certain  
di

stance.
Navigation Display
  in   text   mode.
Zoom
  in.
Zoom
  out.
Display
  in   full   screen   mode.
Use
  the   arrows   to   move   the   map.
Switch
  to   2D   map.
.
Audio and Telematics