lock Citroen C4 DAG 2013.5 2.G Owner's Manual

CONTENTS
2
Monochrome screen A 49
Monochrome screen C 51
Colour screen 55
Trip computer 57
2 - MULTIFUNCTION
SCREENS 49  60
Ventilation 61
Manual air conditioning 63
Dual-zone digital air conditioning 65
Front demist - defrost 69
Rear screen demist - defrost 69
Front seats 70
Rear seats 75
Mirrors 76
Steering wheel adjustment 78
3 - COMFORT 61  78
Remote control key 79
Alarm 88
Doors 90
Boot 91
Electric windows 92
Panoramic sunroof 94
Fuel tank 95
Misfuel prevention (Diesel) 97
4 - ACCESS 79  97
Lighting controls 98Automatic illumination of headlamps 102
Welcome lighting 103
Headlamp adjustment 104
Directional lighting 105
Wiper controls 107
Automatic rain sensitive wipers 108
Courtesy lamps 110
Interior mood lighting 111
Boot lamp 111
5 - VISIBILITY 98  111
Interior fi ttings 112
Centre consoles 115
Front armrest 116
Boot fi ttings 121
Luggage cover
(enterprise version) 124
6 - FITTINGS 112  124
Instrument panels 28
Rev counter 31
Warning and indicator lamps 32
Indicators 43
Time and units 46
Customisation 48
FAMILIARISATION 4  25
1 - MONITORING 28  48
Child seats 125
Deactivating the passenger's front
airbag 127
ISOFIX child seats 134
Child lock 138
7 - CHILD SAFETY 125  138 ECO-DRIVING 26  27

6
OPENING


2-button remote control


3-button remote control
Welcome lighting

A.
Unfolding / Folding the key
(fi rst press this button).



79, 81


A.
Folding/unfolding the key
(fi rst press this button).



80, 81
When a sensor detects a low level of
light, the remote switching on of the
dipped beam headlamps, the side-
lamps and the side spotlamps makes
your approach to the vehicle easier. Complete or selective unlock-
ing of the vehicle
(rapid fl ashing of the direction
indicators).
Normal locking
(press once; fi xed lighting of
the direction indicators). Complete or selective unlocking
of the vehicle
(rapid fl ashing of the direction
indicators).
Opening the windows
(hold until the desired level is reached).
Selective unlocking of the boot.
Normal locking
(press once; fi xed lighting of
the direction indicators).
Closing the windows
(hold until the desired level is reached). In the same way, the passenger compart-
ment lighting, such as the courtesy lamps
and the footwell lamps, comes on.



103

7
FAMILIARISATION
OPENING


Boot


2-button remote control

3-button remote control


Fuel tank
Panoramic sunroof



1.
Unlocking the vehicle.

2.
Opening the boot.



79, 91



1.
Selective unlocking of the boot.

2.
Opening the boot.



80, 91



A.
Opening the fuel fi ller fl ap.
Capacity of the fuel tank: approximately
60 litres.

1.
Opening the blind (four positions
possible).

2.
Closing the blind (initial position).



95



94

10
INSTRUMENTS AND CONTROLS




1.
Steering lock and ignition.

2.
Steering mounted control paddles
for the electronic gearbox.

3.
Wiper / screenwash / trip computer
control stalk.

4.
Speaker (tweeter).

5.
Windscreen demisting vent.

6.
Sunshine sensor.

7.
Passenger's airbag.

8.
Glove box / Audio/video sockets /
Passenger's airbag deactivation
switch.

9.
Heated seat control.

10.
Lumbar massage control.

11 .
Electric parking brake.

12.
Gear lever, electronic gearbox.

13.
Large multifunctional storage unit.

13
FAMILIARISATION
SITTING COMFORTABLY


Front seats


Head restraint height and angle

Lumbar
Other functions
available...
Lumbar massage.
Storing driving positions (driver's
electric seat).
Heated seats.



Steering wheel adjustment
Front armrest




73


1.
Release the adjustment mechanism.

2.
Adjust for height and reach.

3.
Lock the adjustment mechanism.



78
For your comfort, the front armrest can
be adjusted for longitudinal position
and for height, depending on version.
It also has a storage compartment; this
may be equipped with a 230 V / 50 Hz
socket.



116, 117



72

As a safety precaution, these
operations must only be carried
out when stationary.

17
FAMILIARISATION
MONITORING


Instrument panels
Warning lamps
Central switch panel



A.
With the ignition on, the bars indi-
cate the level of fuel remaining.

B.
With the engine running, its associ-
ated low level warning lamp should
go off.

C.
With the ignition on, the oil level indi-
cator should show for a few seconds
that the level is OK or correct, de-
pending on version.



28


1.
With the ignition on, the orange and
red warning lamps come on.

2.
With the engine running, these
warning lamps should go off.



32


A.
Make an emergency call.


142, 233

B.
Access to CITROËN services.


142, 233


C.
Hazard warning.



139

D.
Central locking.



86

E.
Black panel (black screen).



47
If the levels are not correct, top up the
levels which are low. If warning lamps remain on, refer to the
page concerned.

1
MONITORING
36


Warning lamp



is on



Cause



Action/Observations








Anti-lock
Braking
System (ABS)


fi xed. The anti-lock braking system
has a fault. The vehicle retains conventional braking.
Drive carefully at reduced speed and
contact a CITROËN dealer or a qualifi ed
workshop without delay.



Engine
autodiagnosis
system


fl ashing. The engine management
system has a fault. Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or a
qualifi ed workshop.

fi xed. The emission control system
has a fault. The warning lamp should go off when the
engine is started.
If it does not go off, contact a CITROËN
dealer or qualifi ed workshop without delay.




Low fuel level


fi xed,
accompanied
by and audible
signal and a
message. When it fi rst comes on there
remains approximately
6
litres
of fuel in the tank.
At this point, you begin to use
the fuel reserve. Refuel as soon as possible to avoid
running out of fuel.
Until suffi cient fuel is added, this warning
lamp will come on every time the ignition
is switched on, accompanied by an
audible signal and a message.
This audible signal and message are
repeated with increasing frequency as
the fuel level drops towards "0"
.
Fuel tank capacity: approximately
60 litres
.
Never continue to drive until you run
out of fuel, as this could damage the
emission control and injection systems.

1
MONITORING
38





Water in Diesel


fi xed. The Diesel fuel fi lter contains
water. Risk of damage to the injection system
on Diesel engines.
Contact a CITROËN dealer or a qualifi ed
workshop without delay.

Particle
emissions fi lter
(Diesel)
fi xed,
accompanied by
an audible signal
message on the
risk of blockage
of the particle
emissions fi lter. This indicates that the particle
emissions fi lter is starting to
become saturated. As soon as driving conditions allow,
regenerate the fi lter by driving at a speed
of at least 35 mph (60 km/h) until the
warning lamp goes off.
fi xed, accompanied
by an audible
signal and and a
message that the
particle emissions
fi lter additive level
is too low. This indicates the low level of
the additive reservoir. Have the reservoir topped up as soon
as possible by a CITROËN dealer or a
qualifi ed workshop.

Warning lamp



is on



Cause



Action/Observations








Airbags


temporarily. This lamp comes on for a few
seconds when you turn on the
ignition, then goes off. This lamp should go off when the engine
is started.
If it does not go off, contact a CITROËN
dealer or a qualifi ed workshop.

fi xed. One of the airbag or seat belt
pretensioner systems has a
fault. Have it checked by a CITROËN dealer or
a qualifi ed workshop.

1
MONITORING
45

Service overdue
For a few seconds after the ignition is
switched on, the spanner fl ashes
to
indicate that the service must be car-
ried out as soon as possible.

Example:
the service is overdue by
180 miles (300 km).
For a few seconds after the ignition is
switched on, the screen indicates:
A few seconds after the ignition is
switched on, the distance recorder re-
sumes its normal operation. The span-
ner remains on
.
The distance remaining may be
weighted by the time factor, de-
pending on the type of driving.
Therefore, the spanner may also
come on if you have exceeded
the two year service interval.







Service indicator zero reset
This operation cannot be car-
ried out while a reminder of the
servicing information is being
displayed.
Following this operation, if you
wish to disconnect the battery,
lock the vehicle and wait at least
fi ve minutes for the zero reset to
be registered.

Recalling the service information
You can recall the service information
at any time.



Briefl y press the ".../000"
trip dis-
tance recorder zero reset button.
The service information is displayed
for a few seconds.

After each service, the service indicator
must be reset to zero.
The procedure for resetting to zero is
as follows:



switch off the ignition,


press and hold the ".../000"
trip dis-
tance recorder zero reset button,


switch on the ignition; the distance
recorder display begins a count-
down,


when the screen indicates "=/0"

and the spanner disappears, re-
lease the button.

1
MONITORING
46












Distance recorders

The total and trip distances are dis-
played for thirty seconds when the ig-
nition is switched off, when the driver's
door is opened and when the vehicle is
locked or unlocked.

Trip distance recorder
Total distance recorder
















Setting the time and the time
format in the instrument panel
without audio system

On the two-tone instrument panel with-
out audio system, to adjust the time,
use buttons A
and B
then carry out the
operations in the following order:



press buttons A
and B
simultane-
ously: the minutes fl ash,


press A
to increase the minutes or
B
to reduce the minutes,


press buttons A
and B
simultane-
ously: the hours fl ash,


press A
to increase the hours or B

to reduce the hours,


press buttons A
and B
simultane-
ously: 24 H or 12 H is displayed and
fl ashes,


press button A
or B
to change the
format,


press buttons A
and B
simultane-
ously to exit from time setting.


After approximately 30 seconds without any ac-
tion, the screen returns to the normal display.

Measures the total distance travelled
by the vehicle since its fi rst registration.

Measures the distance travelled since it
was last reset to zero by the driver.



With the ignition on, press and hold
this button until zeros appear.

On the two-tone instrument panel with-
out audio system, to change the display
units, use buttons A
and B
then carry
out the operations in the following order:



press buttons A
and B
simultane-
ously for three seconds: km/h or
mph fl ashes,


press button A
or B
to change the
units,


press buttons A
and B
simultane-
ously to exit from setting units.
After approximately 30 seconds without
any action, the screen returns to the
normal display



Setting units in the instrument
panel without audio system

Setting the time and units in the
multifunction screen
The other instrument panels are as-
sociated with an audio system and a
multifunction screen. Refer to the cor-
responding screens.