Citroen C4 PICASSO 2008 1.G Owner's Manual
Manufacturer: CITROEN, Model Year: 2008, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2008 1.GPages: 266, PDF Size: 7.14 MB
Page 181 of 266
1 7 8
V
T A B L E O F F U S E SF U S E S U N D E R T H E D A S H B O A R D
A c c e s s t o t h e s e c o n d d a s h b o a r d f u s e b o x
R e f e r e n c e R a t i n g F u n c t i o n s
F2920AHeated seats
F30Free
F31Free
F32Free
F335A P a r k i n g a s s i s t a n c e , a u t o m a t i c s c r e e n w i p e a n d l i g h t i n g , p a s s e n g e r ’ s e l e c t r i c s e a t , A F I L , H i - F i a m p l i fi e r
F345ATrailer
F35Free
F3620A H i - F i a m p l i fi e r
F3710A A i r c o n d i t i o n i n g , l i g h t p a c k
F3830A D r i v e r ’ s e l e c t r i c s e a t
F395A F u e l fl a p
F4030A P a s s e n g e r ’ s e l e c t r i c s e a t , p a n o r a m i c r o o f
A f t e r a n y o p e r a t i o n o n t h e f u s e s i n t h e f u s e b o x , c h e c k t h a t t h e f u s e b o x c o v e r i s p u t b a c k c o r - r e c t l y f o r t h e i r p r o t e c t i o n .
Page 182 of 266
V
179
T A B L E O F F U S E SF U S E S U N D E R T H E B O N N E T
E n g i n e c o m p a r t m e n t f u s e s
F u s e b o x
T o a c c e s s t h e f u s e b o x l o c a t e d i n t h e e n g i n e c o m p a r t m e n t , d e t a c h a n d r e m o v e t h e c o v e r .
A l l w o r k o n t h e M A X I f u s e s , w h i c h a r e l o c a t e d i n t h e s e f u s e b o x e s a n d w h i c h g i v e e x t r a p r o t e c t i o n , i s t h e p r e s e r v e o f C I T R O Ë N t e c h n i c i a n s . A l l w o r k o n t h e M A X I f u s e s , w h i c h a r e l o c a t e d i n t h e s e f u s e b o x e s A l l w o r k o n t h e M A X I f u s e s , w h i c h a r e l o c a t e d i n t h e s e f u s e b o x e s
A f t e r a n y o p e r a t i o n , c a r e f u l l y r e c l o s e t h e c o v e r . I f t h e c o v e r i s n o t c o r r e c t l y p o s i t i o n e d o r n o t p r o p e r l y c l o s e d , t h a t c o u l d c a u s e s e r i o u s p r o b l e m s o n y o u r v e h i - c l e . F o r t h e s a m e r e a s o n , t a k e c a r e n o t t o s p i l l a n y l i q u i d i n t h e f u s e b o x .
Page 183 of 266
1 8 0
V
T A B L E O F F U S E S F U S E S U N D E R T H E B O N N E T
R e f e r e n c e R a t i n g F u n c t i o n s
F120A E n g i n e m a n a g e m e n t
F215AHorn
F310A S c r e e n w a s h p u m p
F420A H e a d l a m p w a s h p u m p
F515A E n g i n e c o m p o n e n t s
F610A X e n o n d u a l - f u n c t i o n d i r e c t i o n a l h e a d l a m p s , h e a d l a m p h e i g h t c o r r e c t i o n m o t o r , c l u t c h s w i t c h , B C P ( p r o t e c t i o n s w i t c h b o x )
F710A A u t o m a t i c g e a r b o x , e n g i n e c o o l a n t l e v e l s w i t c h , p o w e r s t e e r i n g
F825A S t a r t e r m o t o r
F910A S t o p l a m p s w i t c h
F1030A E n g i n e c o m p o n e n t s
F1140ARear blower
F1230AScreen wipe
F1340A B S I ( B u i l t - i n S y s t e m s I n t e r f a c e )
F1430A A i r p u m p , h e a t e x c h a n g e s a v e r
F1510A R i g h t - h a n d m a i n b e a m
F1610A L e f t - h a n d m a i n b e a m
F1715A L e f t - h a n d d i p p e d b e a m
F1815A R i g h t - h a n d d i p p e d b e a m
F1915A E n g i n e c o m p o n e n t s
F2010A E n g i n e c o m p o n e n t s
F215A C o o l i n g f a n r e l a y
Page 184 of 266
V
1 8 1
T A B L E O F F U S E S
F U S E S O N T H E B A T T E R Y
R e f e r e n c e R a t i n g F u n c t i o n s
F1 - B a t t e r y P l u s c o n n e c t i o n s t u d s
F2 - S u p p l y c o n n e c t i o n s t u d s , B S M ( e n g i n e r e l a y u n i t )
F3Free
F45A A u t o m a t i c g e a r b o x a c t u a t o r a n d E C U
F515A D i a g n o s t i c s o c k e t
F615A E C U f o r 6 - s p e e d e l e c t r o n i c g e a r b o x / a u t o m a t i c g e a r b o x
F75AESP ECU
F820ARear 12V socket
F u s e s o n t h e b a t t e r y
F u s e b o x
T o a c c e s s t h e f u s e b o x l o c a t e d o n t h e b a t t e r y , d e t a c h a n d r e m o v e t h e c o v e r .
A f t e r a n y o p e r a t i o n , c a r e f u l l y r e c l o s e t h e c o v e r . I f t h e c o v e r i s n o t c o r r e c t l y p o s i t i o n e d o r n o t p r o p e r l y c l o s e d , t h a t c o u l d c a u s e s e r i o u s p r o b l e m s o n y o u r v e h i - c l e . F o r t h e s a m e r e a s o n , t a k e c a r e n o t t o s p i l l a n y l i q u i d i n t h e f u s e b o x .
Page 185 of 266
12
3
4
182
VIFRONT LENS
Dipped beam
Main beam
Sidelamp
Direction indicator
Note : A slight misting may appear on the internal sur-face of the headlamp glass in some climatic conditions (e.g. low temperature or humidity) ; this disappears af-ter the lamps have been on for a few minutes.
C H A N G I N G B U L B SH A L O G E N H E A D L A M P S
Dipped beam
1. Remove the rubber plug.
2. Rotate the bulb-holder a quarter turn anti-clockwise and remove it from its housing.
3. Replace the bulb H7.
4. Reposition the bulb-holder by pushing it in, tighte -ning it by a quarter turn (clockwise).
5. Put back the rubber plug.
Changing a halogen bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns).
D o n o t t o u c h t h e b u l b d i r e c t l y w i t h y o u r fi n g e r s , u s e l i n t - f r e e c l o t h s .
It is imperative to use only anti-U.V. type bulbs in order not to damage the headlamp.
When using a high-pressure washer on persistant marks, do not direct at the lamps or their outlines for too long, so as not to damage their coating and their seals.
Page 186 of 266
VI
183
Main beam
1. Remove the rubber plug.
2. Detach the clips by lowering them on each side of the bulb.
3. Pull on t he bulb- holder t o remove it.
4. Replace the bulb H1.
5. Push the bulb-holder back into its housing.
6. Reattach the clips.
7. Put back the rubber plug.
Sidelamp
1. Rotate the bulb-holder a quarter turn anti-clockwise.
2. Remove it from its housing.
3. Replace the bulb H6W.
4. Reposition the bulb-holder.
5. Rotate it a quarter turn clock-wise to reposition in its housing.
Direction indicator
1. The direction indicator bulb is located underneath the main beam bulb. Remove the rub-ber plug.
2. Pull on the bulb-holder to re-move it.
3. Replace the bulb H21.
4. Reposition the bulb-holder in the bracket and push it in.
5. Put back the rubber plug.
C H A N G I N G B U L B SH A L O G E N H E A D L A M P S
Page 187 of 266
12
3
4
184
VI Main beam (H7)
1. Remove the rubber plug.
2. Rotate the bulb-holder a quarter turn anti-clockwise and remove it from its housing.
3. Replace the bulb H7.
4. Reposition the bulb-holder by pushing it in, tighte -ning it by a quarter turn (clockwise).
5. Put back the rubber plug.
FRONT LENS WITH XENON DUAL-FUNCTIONDIRECTIONAL HEADLAMPS
Xenon dual-function headlamp (dipped/main beam)
C H A N G I N G B U L B SX E N O N D U A L - F U N C T I O N H E A D L A M P S
If the headlamp bears this symbol, any operation to change the Xenon dual-function directional headlamp D1S is the preserve of professionals (risk of electrocution).
Contact a CITROËN dealer.
It is recommended to change both bulbs at the same time if one of them is faulty. Sidelamp (see “Halogen headlamps”)
Direction indicator (see “Halogen headlamps”)
When using a high-pressure washer on persistant marks, do not direct at the lamps or their outlines for too long, so as not to damage their coating and their seals.
Page 188 of 266
1
23
A
B
VI
185
REAR LENS
Note the bulb that is faulty.
Bulbs
Direction indicator: PY21W.
Stoplamp and sidelamp :P21/5W.
Reversing lamp : P21W.
Rear lamp units on the bodywork
1. With the tailgate open, press on the plastic cover A, located close to the lens, to release it from its housing.2. Undo the two screws B on the side of the lens and detach the lamp by pulling it rearwards.3. Disconnect the connector linking the lens unit with the tailgate.4. Remove the bulb-holder.5. Replace the bulbs. To remove a bulb, rotate it a quarter turn. To r e fi t t h e b u l b , r o t a t e i t a q u a r t e r turn in the other direction.6. Reposition the bulb-holder.7. Reconnect the connector to the lens unit.8. Reattach the lamp unit on the body work and do up the two screws.9. Reposition the plastic cover by exerting pressure.
Rear lamps on the tailgate
1. With the boot open, remove the plastic cover on the tailgate.
2. Remove the bulb-holder from its housing.
3. Replace the bulb. To remove a bulb, rotate it a quarter turn. To r e fi t t h e b u l b , r o t a t e i t a q u a r t e r turn in the other direction.
4. Reposition the bulb-holder.
5. R e fi t t h e p l a s t i c c o v e r .
C H A N G I N G B U L B SR E A R L E N S - C 4 P I C A S S O
Page 189 of 266
3
2
1
4
186
VIREAR LENS
Note the bulb that is faulty.
Bulbs :
Direction indicator : PY21W.
Stoplamp : P21W.
Reversing lamp : P21W.
Sidelamp : LED
Contact a CITROËN dealer.
Rear lamps
1. With the tailgate open, undo the 3 screws located on the side of the lens unit and pull it rearwards to detach.
2. Disconnect the connector lin-king the lens unit to the boot. Do not disconnect the LEDs.
3. Remove the seal.
4. Remove the bulb-holder.
5. Replace the bulbs. To remove a bulb, rotate it a quarter turn. T o fi t t h e b u l b , r o t a t e i t a q u a r t e r turn in the other direction.
6. Reposition the bulb-holder.
7. Put back the seal.
8. Reconnect the connector to the lens unit.
9. Stow the harness in the open-ing provided in the bodywork.
10. Reattach the lens unit on the bodywork and do up the 3 screws.
Third stoplamp with bulb
1. With the boot open, detach the interior trim.
2. Undo the nuts.
3. Using a thin screwdriver, de-tach the 3 retaining lugs.
4. Remove the lamp via the ex-terior of the tailgate.
5. Remove the bulb-holder.
6. Change the faulty bulb(s).
Check that the vehicle lamps work correctly after each operation.
C H A N G I N G B U L B S
R E A R L E N S - G R A N D C 4 P I C A S S O
Third stoplamp with LED
Contact a CITROËN dealer
Page 190 of 266
12
VI
187
C H A N G I N G B U L B S
Number plate lamp
1. Insert a thin screwdriver in one of the holes on the outside of the plastic cover.
2. Push outwards.
3. Remove the plastic cover.
4. Pull on the bulb to remove it.
5. Replace the faulty bulb W5W.
Foglamp
1. Pass your hand underneath the bumper to reach the bulb-holder.
2. Rotate the bulb-holder a quar-ter turn.
3. Pull on the bulb-holder.
4. Rotate the bulb a quarter turn to remove it.
5. Replace the bulb P21W.
6. Fit the bulb.
7. Reposition the bulb-holder by rotating it a quarter turn.
Front foglamps
1. Insert the key in the notch 1, tilt-ing the bulb-holder cover locat-ed underneath the bumper, then insert the key in the notch 2 to remove it.
2. Undo the lens.
3. Tilt the bulb-holder.
4. Change the bulb H11.
5. Reposition the bulb-holder.
6. D o u p t h e l e n s a n d r e fi t t h e b u l b - h o l d e r c o v e r fi r m l y i n p l a c e .