lid Citroen C4 PICASSO 2008 1.G User Guide

AB9
0
86
II
SLIDING SUN VISORS
Sliding blinds
Sliding blinds are provided for your protection against bright sunlight. They can be adjusted manually.
- Slide the blind on the visor to the desired position by pushing the area A.
Visor struts
The blinds are extended on the sun visor struts.
Fold the visor downwards, to protect against dazzle to the face.
If dazzle is coming from the side windows, detach the vi-sor from its housing above the centre of the windsc reen and pivot it to the side.
PANORAMIC GLASS ROOF BLIND
Opening the roof blind (positions 1 to 9)
- Rotate the control B to slide the roof blind to the posi-tion desired.
Closing the roof blind (position 0)
- Rotate the control B to position 0 to close the roof blind.The blind has an anti-pinch device.
Note :
- A long press on the locking button on the remote control will close the blind (practical when for example you leave your vehicle on a sunlit carpark).- On returning to your vehicle, a short press on the button B repositions the blind to the last position selected.- Following a fault or after a battery disconnectio n during the movement of the blind or after it has stopped, you have to re-initialise the anti-pinch function. Place the blind in the closed position and press for arou nd 2 seconds on button B.
Do not attach or suspend heavy objects on the slide rail of the sun blind, which also incorporates the in-terior rear view mirror.
R O O F A D J U S T M E N T S

110
III
Head restraint
To raise it, pull it upwards. To lower it, press on the control as well as on the head restraint. The adjustment is correct when the top of the head restraint is level with the top of the head. It can also be adjusted for tilt.
To remove it, press on the unlocking button and pull it up-wards.
To adjust the head restraint fore/aft, move the base of the head restraint to obtain the position desired.
Note : Never drive without the head restraints fi tted.
Backrest angle
Action the control and adjust the angle of the backrest.
It is possible to incline the backrest 45° rearwards by tilting it until it locks ; to unlock it, lift the control.
Seat height adjustment
Raise or lower the the control the number of times necessary to obtain the position desired.
Lumbar support
Rotate the control until you attain the position desired.
Longitudinal adjustment
Raise the control bar, then slide the seat to the positio n desired.
Armrest
To adjust the position of the armrest, pull it up and then fully down, and then raise it to the desired position.
F R O N T S E A T S M A N U A L A D J U S T M E N T S

1
2
III
111
Heated seats
The front seats can be heated independently. Use the controls on the inner sides of the seats and choose one of the three heat intensities below
0 : Off.
1 : Slight heat.
2 : Medium heat.
3 : Strong heat.
The seat temperature will adjust automatically.
Note : the heated seats only func-tion when the engine is running.
Note : The seats can also be adjusted on a temporary basis :
- on opening one of the front doors.
- after switching off the ignition.
Electric adjustments :
Adjustment of seat height and angle, longitudinal adjustment
Adjustment of backrest angle and lumbar support
Raise or lower the front of control 1 to raise or lower the front of the seat base (on driver’s seat).
Raise or lower the rear of control 1 to raise or lower the seat.
Action control 1 forwards or rearwards to slide the seat forwards / backwards.
Push the top of control 2 forwards or rearwards to adjust the backrest angle.
Raise or lower control 2 to increase or decrease the lumbar support.
F R O N T S E A T S E L E C T R I C A D J U S T M E N T S

C
D
E
A
116
III
Each seat can be folded onto the fl oor to form a fl at surface, thus enabling you to modify your vehi-cle’s interior space.
TO FOLD THE SEATS
From the exterior
- Pull fi rmly upwards on strap C, as indicated by the red arrow, to unlock the seat ; maintain the pressure until the seat is fully folded.
- Push the backrest slightly for-wards, so that the backrest piv-ots, folding onto the seat base. The assembly will then lower onto the fl oor.
From the boot (in the loading situation, for example)
You can fold the second-row seat(s) from the boot, having fi rst folded the third-row seats.
- Pull on the control D to unlock the chosen seat, push the back-rest gently forwards.
TO RETURN THE SEATS TO
THE UPRIGHT POSITION
1. Return the second-row seat bases to their initial position and lock them in that position.
2. Raise the backrests and push them rearwards so that they lock in position.
To unlock / lock the rigid plate :
- Slide the latch A on the plate downwards, to unlock.
- Return the plate to the upright position, then slide the latch Aupwards, to lock.
Note : Before deploying the rigid plates, check that the second-row seats are slid as far as possible rearwards. 5-seater confi gurations do not have these rigid plates.
RIGID PLATE
Each second-row seat backrest has a rigid plate attached.
This plate enables you :
- to have a continuous load surface in the boot, whatever the positions of the seats,
- to avoid having objects sliding un-der the second-row seats.
Before moving the third-row seats, return the second-row rigid plates to their initial posi-tion and lock them.
Emergency exit : Should the fi rst system fail (control C), the control D is available for use by third-row passengers to accel-erate their exit.
IMPORTANT : Always super-vise any movements of seats by children.
S E C O N D R O W S E A T S G R A N D C 4 P I C A S S O

E
III
117
“CINEMA SEAT" POSITION
This position allows you to free up space between the fi rst row and the second row.
Pull the control E under the seat.
Note : This position is only pos-sible with the lateral seats.
ACCESS TO THE THIRD ROW SEATS
The third-row seats can be accessed via the lateral second-row seats.
1. Pull the control E. The seat un-locks and the seat base comes up against the backrest.
2. Hold the control E in the raised position, pushing forwards. The whole slides towards the front seat.
3. Raise and lock the rigid plate.
Space becomes free behind the seat, the third-row passengers can get to their seats.
To exit the third-row seat positions :
1. Hold the control E in the raised position. The seat unlocks and the seat base comes up against the backrest.
2. Push the seat backrest, still holding the control E in the raised position.
Note : if the table on the back of the fi rst-row seat is down, close it to enable this operation.
Repositioning the seat,
from the exterior,
with the door open
If there are passengers seated in the third row :
1. Manually return the assembly as far as possible rearwards. The seat does not return as far as the maximum rearwards position, so as to retain leg space for the third-row pas-sengers.
2. Fold the seat base.
S E C O N D R O W S E A T S G R A N D C 4 P I C A S S O

III
119
A Lounge version is available in the 5 seater model. This has two se-cond-row seats that are identical to the fi rst-row seats, providing greater comfort for rear passengers.
ADJUSTING THE SEATS
The seats have the following adjust-ments :
- head-restraint adjustment,
- backrest angle,
- greater longitudinal adjustment,
- height-adjustable armrests.
Refer to the page " FRONT SEATS - Manual adjustments " for the operation of the adjustment controls.
LUGGAGE COVER BEHIND
THE SEATS
A fl exible luggage cover positio-ned behind the second-row seats enables you to prevent objects from sliding under or between the second-two seats, as well as concealing the contents of your boot from outside view.
It is fi xed to the fl oor by two hooks located behind the seats and an-chored at special points on the rear pillars.
This fl exible luggage cover is mo-vable and can be rolled up for stowage behind the second-row seats.
SEAT BELTS
For safety reasons, always attach your seat belt before positioning the armrest between yourself and the door.
STORAGE POCKETS
Two storage pockets are located on the insides of the Lounge ver-sion seats.
F E A T U R E S O F T H E 4 S E A T E R
L O U N G E V E R S I O N

IV
153
B U T T O N C O N T R O L S
AOn / Off.Volume adjust.
BCD eject.
CCD aperture.
DSOURCEOne press : Selection of sound source (Radio, CD, CD changer).
EBAND/AST
Short press : Selection of frequency bands and memory banks.Long press : Automatic pre-set function (Autostore).
FCall-up of audio adjustments :Sound ambiences, bass, treble, loudness, fade, balance, speed-sensitive volume.speed-sensitive volume.
GLIST
Radio source :- Short press : Display of the list of radio stations available (30 maximum).- Long press : Update of list of stations.CD source : Display of list of tracks of the CD.
HESCShort press : Cancel the current operation or delete a super-imposed display.Long press : Return to the permanent display.
ITA/PTYShort press : TA function (road information).Long press : PTY function (eélection of programme type).
J
Radio source : Manual search of higher frequencies.CD/MP3 changer source : Selection of the previous CD/CD-cover.Other sources : Scrolling in the Main Menu.
K
Radio source : Automatic search of higher frequencies.CD source, CD changer source and MP3 source :Forward search for tracks.- Long press : Fast forward with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
LOK
Button for validation and activation/deactivation of certain functions.If your vehicle has the Bluetooth system : Answer call, end call.
M
Radio source : Manual search of lower frequencies.CD/MP3 changer source : Selection of the next CD/CD-cover.Other sources : Scrolling in the Main Menu.
N
Radio source : Automatic search of lower frequencies.CD source, CD changer source and MP3 source :Reverse search for tracks.- Long press : Rewind with accelerated sound.Other sources : In the menus, choice of your adjustments.If your vehicle has the Bluetooth system : Selection of characters.
OMENUDisplay of the Main Menu.In certain countries, this control is deactivated while the vehicle is moving.
P
1-6
1-5
Radio source :- Short press : Recall of pre-set stations.- Long press : Memorisation.CD changer source : Selecting a CD.
QMUTE- First press : Temporary sound pause.- Second press : Restoration of sound.
RMODESelection of the type of information displayed.
SCD changer.

154
IV
Multifunction screen A
Technical specifi cations
Your Bluetooth compatible radio possesses :
-3 wavebands (MW/LW/FM).
-Dual tuner with RDS EON PTY, display of the PS name, RDS programme search, TA traffi c informa-tion, 24 pre-selections (18 FM - 6 MW/LW), automatic memorisation of the AST strongest stations.
-An MP3- compatible CD reader.
-Audio power of 4 x 35 W.
Multifunction screen C
C O N T R O L S A T T H E S T E E R I N G W H E E L
The controls at the steering wheel give you access to certain functions, without you needing to use the radio-CD control panel.
1VOL +Volume increase
2
Radio source :Short press : Automatic search of higher frequencies.CD and CD changer source :Short press : Forward search for tracks.Long press : Fast forward with accelerated sound.
3
Radio source :Scrolling of pre-set stations.CD and MP3 source :Search of the track.CD changer source :Selection of next or previous CD.
4VOL -Volume decrease.
5MuteFirst press : Temporary sound pause.Second press : Restoration of sound.
6MENU
Access to the main menu to activate/deactivate or choose the adjustments for your vehicle.In certain countries, this control is deactivated while the vehicle is moving.
7OK
In a menu, a list, an alphabet :Validation of the function, the element or the value chosen.If your vehicle has the Bluetooth system : Answer call, end call
8Selection of the next or previous elements of a menu in a screen, a list, an alphabet.
9ESCShort press : Cancellation of the current operation.Long press : Return to the permanent display.
10MODESelection of type of information displayed on the right of the screen and, for screen A, choice of activation/deactivation of functions and adjustments.
11If your vehicle has the Bluetooth system : Press : Display of the “Directory” menu.
12If your vehicle has the Bluetooth system :Press : Activation of voice recognition.

IV
R A D I O S O U R C E
Notes on radio reception
Your radio will be subject to certain phenomena that are not encoun-tered by domestic systems.
The reception of AM and FM sig-nals may suffer from interference, which is caused by the nature and propagation of the signals and does not refl ect on the quality of your radio installation.
In AM, the reception may be af-fected when passing under power lines or bridges, or when travelling through tunnels.
In FM mode, the reception may be affected by the distance from the station transmitter, the refl ecting of signals off obstacles (mountains, hills, tower blocks) and radio blacks-pots (no coverage from the station transmitter).
Selection of radio source
Press button D to select the source.
Selection of frequencies and memory banks
Press button E successively to go through the memory banks FM1, FM2 and FM3, for the FM wave-band, and the memory banks MW/LW, for the AM waveband.
Manual search
Manual search is via buttons J or M.
By keeping button J or M pressed, you will be able to scroll through the waveband. Scrolling will stop as soon as you release the button. The radio will remain tuned to the frequency that is displayed.
Tuning sensitivity
Automatic searches can be car-ried out according to two levels of sensitivity :
- To capture the most powerful trans-mitters, choose the local search mode “LO” (default option).
- To capture the weakest or most distant transmitters, choose the sensitive search mode “DX”.
Search for a station is done fi rst in “LO” (local) sensitivity, then in “DX” (distant) sensitivity.
To commence a search in sensi-tivity “DX” (distant) immediately , press twice in succession on one of the buttons K or N.
Automatic search
A short press on one of the but-tons K or N will tune into higher or lower radio stations respectively, within the chosen waveband.
By keeping button K or N pressed, you will be able to scroll through the waveband. The scrolling will stop at the fi rst station it fi nds once the button is released.
You can also do this by means of control 2 at the steering wheel.
If the automatic search is unable to tune into a known frequency (perhaps owing to very weak re-ception), it is possible to search manually to fi nd this station.
Display and selection of a station available in the area in which you are travelling
Briefl y press on button G to bring up a list of stations, this is updated every 10 minutes.
You can also update this list at any time by giving a long press on button G.
To listen to one of these stations, select by pressing buttons J or Mand validate using button L.

IV
Using the RDS (radio data system) function on FM
The majority of FM radio stations use the RDS system. The radio in your vehicle has this system,.
The RDS system enables these stations to transmit non-audible data in addition to the broadcasting of their programmes. The data provides access to various functions described in this chapter, such as: display of the station name, inter-mittent traffi c information fl ashes or automatic scanning of stations. This enables you to continue listening to your chosen radio station, regard-less of the different frequencies it uses in the regions through which you are travelling.
Scanning of RDS stations
Your radio keeps the best pos-sible reception by continuously looking for any other frequencies on which the selected radio sta-tion is broadcast, automatically choosing the frequency offering the best reception (providing the station broadcasts on more than one transmitter or frequency).
Activation/deactivation of the RDS functions
The RDS functions can be accessed via the following two menus :
- Main menu (press button O).
- Audio menu (press button L).
To activate/deactivate the RDS functions on multifunction screen C :
1. Press button O.
2. Select the AUDIO icon using buttons J or M.
3. Confi rm your choice with a press on button L.
4. Select the sub-menu for the FM waveband, via buttons Jor M. Confi rm your choice with a press on button L.
5. Select scanning for RDS sta-tions, via buttons J or M.
6. Validate your choice with a press on button L.
7. Using control L, select/dese-lect to activate/deactivate the function.
8. Validate your choice by select-ing “OK” on the display.
To activate/deactivate the RDS functions on multifunction screen A :
1. Press button O.
2. Select the AUDIO-CD icon via buttons J or M.
3. Select scanning for RDS sta-tions, via buttons J or M. The system tells you the status (ac-tive or inactive) of the function.
4. Modify this status via buttons K or N.
5. Then please wait for the dis-play to disappear.
Note :
If the RDS function is active :
The “RDS” on the display will light up provided the station being re-ceived uses the RDS system with scanning of frequencies.
The “RDS” on the display is barred if the station received uses the RDS system without frequency search.
If your RDS function is deactiva-ted, the “RDS” on the display will be absent in all cases.
The display will indicate the “NAME” for the stations that use the RDS system and the frequency for stations that do not use it.
R D S S Y S T E M