59 
III
C O M F O R T
  Storing driving positions  
 System which takes into account the  
electrical settings of the driver's seat 
and  exterior  mirrors.  It  enables  you 
to store up to two positions using the 
buttons  on  the  side  of  the  driver's 
seat.    Storing a position   
  Using buttons M/1/2  
   
     Switch on the ignition. 
  
     Adjust your seat and the exterior 
mirrors. 
  
     Press  button    M ,  then  press  but-
ton   1  or   2  within four seconds.   
  An  audible  signal  is  heard  indi- cating that the position has been  
stored.  
 Storing  a  new  position  cancels  the 
previous position.    Recalling a stored position   
  Ignition on or engine running  
   
        B r i e fl   y    p r e s s    b u t t o n      1   or    2   to  re-
call the corresponding position.  
 An audible signal is heard indicating  
the end of the adjustment.  
 When  the  ignition  is  on,  after  a  few  
consecutive  position  recalls,  the 
function will be deactivated until the 
engine  is  started,  to  prevent  dis-
charging of the battery.   
  Vehicle moving  
   
     Press  and  hold  button    1   or   2  
until  the  audible  signal  is  
heard  indicating  the  end  of  the 
adjustment.   
         
 Do not try to store a driving position  
while driving.