Controls Citroen C4 PICASSO 2013 1.G User Guide

1
55
Monitoring
Allows the manual adjustment of the brightness of the instrument panel and touch screen tablet tosuit the ambient light level.

Operates only when the vehicle lighting is on, with the exception of the daytime running lamps.

Two buttons

With the headlamps on, press button Bto
increase the brightness of the instruments
and controls and the interior mood lighting or button Ato reduce it.
As soon as the lighting reaches the required
level of brightness, release the button.
Touch screen tablet
)
Press on the "Configuration"
menu. )
Adjust the brightness by pressing on
the "+ " or " -" buttons.

1
59
Monitoring




Tr i p c o m p u t e r
Type 2 instrument panel


Information display in the instrument panel
)Press the button on the end of the wiper control stalk
to display the various tabs insuccession.- Th
e current information tab with:


●
the range,

●
the current fuel consumption,

●
the Stop & Star t time counter.
- Tr i p "1"
with:


●
the avera
ge speed.

●
the average fuel consumption,

●
the distance travelled, for the first trip.
-
Trip "2"
with:


●
t
he average speed,

●
the average fuel consumption,

●
the distance travelled,
for the second trip.





Tr ip reset
)
When the trip required is displayed, press
the control for more than two secondsor use the left hand thumb wheel of the steering mounted controls.
Trips "1"
and "2"are independent but their use
is identical.
For example, trip "1"can be used for daily figures, and trip "2"for monthly figures.
For all other display modes, pressing the end
of the wiper stalk displays this information in anew window. The displa
y of trip computer information ispermanent when you select the "DIALS"
display mode.

63
2
Access
Deadlocking renders the interior door
controls inoperative. It also deactivates the manual central locking button.
Therefore, never leave anyone insidethe vehicle when it is deadlocked.
Deadlocking
)
With the vehicle unlocked, press
this button.
)Within five seconds, press this button again
to deadlock the vehicle.

This
function allows you to identify your vehicle
from a distance, par ticularly in poor light. Your
vehicle must be locked.
Locating your vehicle
) Press this button.
This will switch on the cour tesy lamps and the direction indicators will flash for about
10 seconds.

66
Access

By the doors: )
With the electronic key in the defined
zone A, press a finger or thumb on one of
the front door handles (at the markings) or
the locking button located on the tailgate to lock the vehicle. ) Within five seconds, press the door handleor the locking button located on the tailgate
again to deadlock the vehicle.



Deadlocking renders the interior door controls inoperative.
It also deactivates the manual central control button.
Therefore, never leave anyone inside
the vehicle when it is deadlocked.

76
Access






Motorised tailgate
Check that there is enough space to allow for
the movement of the tailgate.

Activation and deactivation of the motorised
tailgate function is done in the "Drivingassistance " menu, then " Vehicle settings
".
This function is deactivated by default.
Tailgate controls
A: Exterior control
B: Interior control
Never place a finger in the tailgatelocking system: risk of a seriousaccident!


The tailgate is not designed to suppor t a bicycle carrier.
When installing a bicycle carrier on atowbar, it is essential to deactivate theautomatic operation.
To avoid the risk of injury, ensure thatthere is no person close to the rear of the vehicle when opening and closing the motorised tailgate. Be careful of rear passengers.
The motorised tailgate has an obstacle detection system that automatically interrupts its operation if it contacts an obstacle (the movement is reversed bya few degrees to allow the tailgate tobe freed).

77
2
Access

Motorised opening


Unlocking and opening the tailgate with the electronic key /
remote control

Unlocking and opening the tailgate with the Keyless Entryand Starting system

Openin
g the tailgate
)
Make a long press on this button.
)Press button Aon the tailgate, with theelectronic key in the area of coverage.



When selective locking is activated, the electronic key must be near the rear of the vehicle.


By default, the tailgate openscompletely or alternatively to the
memorised position.

)After complete unlocking of the vehicle, press control Aon the tailgate.
The instruction is confirmed by an audiblesignal.
Motorised closing
There are two possibilities:)
Press and release the exterior
control A.or
- by pressing one of thesetwo buttons,

The motorised tailgate has an anti-pinch system that interrupts closing if it encounters an obstacle.
Operation of the tailgate can be interrupted at any time:

After interruption of an operation,another press on one of the controlsresumes the movement, with the exception of a press on the remote control button, which only allows opening.

or
- by pressing the exterior control A.
Memorising an opening
position

Where height is restricted (garage with a low
ceiling, ...) it is possible to limit and memorise
the opening angle of the tailgate.
Thi
s memorisation is done as follows:


- open the tailgate to the desired position,

- press button
B
or the exterior control A
for more than 3 seconds.
Memorisation of the maximum opening position of the tailgate is confirmed by an audible signal.
To cancel the memorised position:


- stop t
he tailgate in an intermediate position,

- press button B
or the exterior control A
for more than 3 seconds.
)
Press and then release button B.

83
2
Access
Reinitialisation of the
electric windows

Deactivating the rear controls for the rear windows

In the event of contact during operationof the windows, you must reverse themovement of the window. To do this,press the switch concerned.
When operating the passenger electricwindow switches, the driver mustensure that nothing is preventingcorrect closing of the windows.
The driver must ensure that the passengers use the electric windows correctly.
Be aware of children when operatingthe windows.
Be aware of passengers or other persons present when closing thewindows using the the electronic key or the "Keyless Entry and Starting" system.
Followin
g reconnection of the battery, the
safety anti-pinch function must be reinitialised.
The safety anti-pinch function is not active
during these operations. For the safety of your children, pressswitch 5to prevent operation of the rear windows irrespective of their positions.
The warnin
g lamp in the button comes on,
accompanied by a message confirmingactivation. It remains on, as long as the childlock is deactivated.
Use of the rear electric windows from thedriver's controls remains possible.F
or each window:
- lower the window completely, then raise it,
it will rise in steps of a few centimetres with each action. Repeat the operation until the
window closes completely,
- continue to
pull the switch for at least one second after reaching this position, windowclosed.

87
3
Comfort
System which registers the electrical settings of the driver's seat and door mirrors. It enables you to store and recall two positions using the buttons on the side of the driver's seat.
Storing driving positions
Storing a position
Usin
g buttons M / 1 / 2
) Switch on the ignition. )
Adjust your seat and the door mirrors. )
Press button M
, then press button 1or 2
within four seconds.
An audible signal indicates that the position
has been stored.
Storing a new position cancels the previousposition.

Recalling a stored position

I
gnition on or engine running
)
Press button 1or 2to recall the corresponding position.
An audible signal confirms that adjustment
is complete.
You can interrupt the current movement b
ypressing button M, 1
or 2
or by using one of theseat controls.
A stored position cannot be recalled while driving.
Recalling stored positions is deactivated
45 seconds after switching off the ignition.

104
Comfort








Vent ilat ion
The air circulating in the passenger compartment
is filtered and originates either from the outside via
the
grille located at the base of the windscreen or from the inside in air recirculation mode.
Air treatment
The incoming air follows various routes
depending on the controls selected by thedriver:
- direct arrival in the passenger compartment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning).
Control panel
The controls of this system are accessible
in the " Air conditioning " menu of the touchscreen tablet A .
The demisting/defrosting controls for the
windscreen and rear screen are located on theleft of the touch screen tablet.
1.Windscreen demisting-defrosting vents.2. Front quar ter light demisting-defrosting
vents. 3. Front side window demisting/defrosting
v
ents.
Adjustable side air vents.
4. Central adjustable air vents.
5. Air outlets for the front footwells.
6.Side vents for the 2nd row.
7. Air outlets for 2 nd
row footwells.
8.Sunshine sensor.


Air distribution

106
Comfort

















Heating
Temperature adjustment
)
Press one of these buttons,or move the cursor from blue (cold) to red (hot) to adjust the
temperature to your wishes.
Air flow adjustment
) Press one of these buttons toincrease or decrease the speedof the booster fan.


Air distribution adjustment
The intake of exterior air prevents and eliminates misting of the windscreen and side
windows.
The recirculation of interior air prevents exterior
odours and smoke enterin
g the passenger compartment. Win
dscreen.
Footwells.
Centre and side vents. The air distribution can be varied b
y using more
than one button.
Each press of a button activates or deactivates
th
e function.

The indicator lamp is on when the button is activated. For an even distribution of air in the passenger compar tment, the three buttons can
be activated simultaneously.


Air intake / Air recirculation
)
Press this button to recirculate
the interior air. The indicator lamp
in the button comes on.) Press the button again to allow
the intake of exterior air. This is confirmed by the indicator lamp going off.



Avoid driving for too long withoutventilation (risk of misting and deterioration of air quality).
The heatin
g system works only when theengine is running.
Press the button for the " Air conditioning"menu to display the page for the system
controls. The s
ymbol for air flow (a fan) fills progressively
according to the air flow setting made.
By reducing the air flow to the minimum, you
are stopping ventilation of the passenger
compartment.