Citroen C4 PICASSO DAG 2008 1.G Owners Manual
Manufacturer: CITROEN, Model Year: 2008, Model line: C4 PICASSO DAG, Model: Citroen C4 PICASSO DAG 2008 1.GPages: 266, PDF Size: 7.07 MB
Page 91 of 266
90
II
Stopping the function
- by an action on the control on position «LIM» to position 0.
- by the engine stopping.
The speed previously chosen is still memorised.
If there is a malfunction,a mes-sage will display accompanied by a sound signal and lighting of the SERVICE warning lamp.
Contact a CITROËN dealer.
Temporary override of the m a x i m u m s p e e d
The accelerator pedal is equipped with an end-of-travel switch. If you action this switch by pressing the pedal hard down, you can exceed the memorised maximum speed at any time.
During the time the speed is being exceeded, the displayed speed fl a s h e s .
You have only to release the ac-celerator pedal to return below the maximum speed and render the function active again.
Observation : If during the operation of the speed limiter, the system is unable to keep within the maximum speed (for example on a steep descent or under heavy acceleration) t h e n t h e s p e e d fl a s h e s . A d a p t y o u r speed as necessary.
The function will re-engage when your speed returns below the de-sired maximum speed.
Disengagement of the m a x i m u m s p e e d
Press on button 3.
This action causes the information «OFF» to appear on the instru-ment panel screen.
U s e o f fl o o r m a t s t h a t a r e n o t a p p r o v e d b y C I T R O Ë N m a y h i n d e r access to the accelerator pedal and thus interfere with the func-tioning of the speed limiter.
To avoid any risk of interfering with the pedals :
- c h e c k t h a t t h e fl o o r m a t i s c o r r e c t l y p o s i t i o n e d ,
- n e v e r u s e m o r e t h a n o n e fl o o r m a t .
This action does not cancel the memorised maximum speed which remains displayed in zone A ofthe instrument panel.
S P E E D L I M I T E R
Page 92 of 266
II
D I E S E L P A R T I C U L A T E F I L T E R S Y S T E M
C o m p l e m e n t a r y t o t h e c a t a l y t i c c o n v e r t e r , t h i s fi l t e r m a k e s a n a c t i v e c o n t r i b u t i o n t o t h e p r e s e r v a t i o n o f a i r q u a l i t y by the retaining of the unburnt pollutant particles. Black exhaust fumes are thus no longer emitted.
C l o g g i n g o f t h e p a r t i c l e fi l t e r
If there is risk of clogging, a message appears on the multifun ction display, accompanied by a sound signal and lighting of the SERVICE warning lamp.
T h i s a l e r t t e l l s y o u t h a t t h e p a r t i c l e fi l t e r i s s t a r t i n g t o fi l l u p ( i n c o n d i t i o n s o f u r b a n d r i v i n g o f e x c e p t i o n a l l y l o n g d u r a - t i o n : l o w s p e e d s , t r a f fi c j a m s e t c . )
T o r e g e n e r a t e t h e fi l t e r , i t i s a d v i s e d t o d r i v e a s s o o n a s p o s s i b l e , w h e n t r a f fi c c o n d i t i o n s p e r m i t , a t a s p e e d o f 6 0 k m / h ( a r o u n d 4 0 m p h ) o r m o r e f o r a t l e a s t fi v e m i n u t e s ( u n t i l t h e a l e r t m e s s a g e d i s a p p e a r s ) .
If this alert persists, consult a CITROËN dealer.
Observation : After prolonged idling or driving at very low speeds, you may occa sionally notice water vapour be-ing emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment.
Diesel fuel additive level
If the additive level becomes too low, a message appears on the multifunction display, accompanied by a sound signal and lighting of the SERVICE warning lamp. It is necessa ry to have the additive level topped up. Urgently consult a CITROËN dealer.signal and lighting of the SERlighting of
Page 93 of 266
A
92
II
This driving assistance device alerts you if you are wandering from your lane (continuous or dotted line marking on the road surface).
It is designed especially for use on motorways and dual carriage-ways, operating only at speeds above 80 km/h (approx. 50 mph).
Activation / Deactivation
A press on control A activates the function, the warning lamp on the control lights up.
A second press on control A de-activates the function, the warning lamp on the control goes out.
Whenever you start the engine, the mode (activated/deactivated), selected when you last switched off the engine, is retained.
The driver must still remain attentive and in complete control of the ve-hicle.
Operation
Provided you are travelling at over 80 km/h (approx. 50 mph), if you cross a lane marking, you are alerted by a vibration within the cushion of your seat :
- oriented to the right for crossing a lane marking to the right,
- oriented to the left for crossing a lane marking to the left.
The system does not alert you while your direction indicator is o perating, nor for about 20 seconds after your direction indicator has stopped.
Note : In the event of an electronic malfunction, a message is displayed, the SERVICE warning lamp comes on and a sound signal is heard. Contact a CITROËN dealer. warning
Observations : T h i s d e v i c e i s d e s i g n e d t o i d e n t i f y t r a f fi c l a n e m a r k i n g s .
I n c e r t a i n s p e c i fi c i n s t a n c e s , i t m a y t r i g g e r a n u n w a n t e d a l e r t , f o r e x a m p l e when you cross a direction arrow or some other random marking.
The effectiveness of the system may be temporarily affected by condi tions external to the vehicle :
• D e t e c t i o n o f l a n e s m a d e d i f fi c u l t b y :
- Markings that are worn or erased.
- I n s u f fi c i e n t c o n t r a s t w i t h t h e s u r f a c e o f t h e r o a d .
Page 94 of 266
II
93
Function active
If there is a malfunction, a message informs you of this and the “Dipped b e a m s ” w a r n i n g l a m p fl a s h e s .
Have the system checked by a CITROËN dealer.
You are recommended to have both Xenon dual-function direction al headlamps changed if there has been a malfunction in either of them.
Function inactive
This function is associated with Xenon dual-function headlamps.
Whether on dipped beam or main beam, your headlamps follow the direction of the road ahead.
Lighting quality when driving round bends is considerably improved.
On vehicles equipped with day-time-running lamps (according to country), the function is acti-vated only if the lighting control is on main beam / dipped beam or AUTO (automatic lighting of head-lamps). If the control is in position 0, the function is not active.
Activation / Deactivation
The function can be activated / deactivated in the “Main men u”. See “Multifunction displays”.
When you start the engine, you retain the mode (activated or deactivated) that was selected when you last stopped the engine.
By default, this function is in activated mode.
Note : At zero or very low speed, or in reverse gear, this function is inactive.
D I R E C T I O N A L H E A D L A M P S
Page 95 of 266
94
II
Proximity sensors are located in the front and rear bumpers of your vehicle.
Functioning
- When you engage reverse gear, a sound signal informs you that the system is active. The outline of your vehicle is displayed on the multi-function screen C or DT. Obstacles situated at the rear or in front of the vehicle will be detected.
- When you are moving forward, provided this is at a speed less than 10 km/h (approx. 6 mph), either in neutral or in gear, the outline on your vehicle is displayed on the screen as soon as an obstacle is dete cted in front of the vehicle. Obstacles located in front of the vehicle will be detected.
- In forward gear or in reverse gear, as the vehicle approaches the ob-stacle, the sound signal becomes more and more rapid and the ba rs are seen to move ever nearer to the vehicle.
- Whether in forward gear or in reverse gear, when theobstacle is close, the sound signal becomes continuous and the WARNING panel appears on the multifunction display.
Note : the sound signal is emitted by the loudspeakers that are nearest to the obstacle.
P A R K I N G A S S I S T A N C E
Multifunction screen DT
Multifunction screen C
This system can in no way replace vigilance and responsibility of the part of the driver.
When you engage reverse gear, a short sound signal followed by a different sound signal accompanied by a message and the lighting of the SERVICE warning lamp, indi cates that there is a malfunction.
Contact a CITROËN dealer.
Page 96 of 266
AII
95
Activation / Deactivation
You can activate/deactivate the parking assistance by pressing cont
rol A. If the parking assistance is inactive, the warning lamp is on.
Activation or deactivation of the parking assistance is memorised wh en you stop the vehicle.
Notes :
- T h e r e a r p a r k i n g a s s i s t a n c e i s d e a c t i v a t e d a u t o m a t i c a l l y i f a t r a i l e r i s a t t a c h e d t o t h e v e h i c l e . T h e fi t t i n g o f t h e towbar should be carried out by a CITROËN dealer. - T h e r e a r p a r k i n g a s s i s t a n c e i s d e a c t i v a t e d a u t o m a t i c a l l y i f a t r a i l e r i s a t t a c h e d t o t h e v e h i c l e . T h e fi t t i n g o f t h e - T h e r e a r p a r k i n g a s s i s t a n c e i s d e a c t i v a t e d a u t o m a t i c a l l y i f a t r a i l e r i s a t t a c h e d t o t h e v e h i c l e . T h e fi t t i n g o f t h e
- The proximity sensors will not be able to detect obstacles that are situated immediately below or abo ve the bumpers.
- A thin object such as a spike, or a bollard or other similar object, will be detected only at the start of the manœuvre, not when the vehicle has arrived up close.
- In bad weather or in winter, make sure that the sensors are n ot covered by dirt, or by ice or snow.
P A R K I N G A S S I S T A N C E
Page 97 of 266
A
96
III
Electrical control
From the driver’s seat position, the controls siutated on the door enable the vehicle’s electric win-dows to be actioned.
Note : The windows can also be operated for a short time after the ignition has been switched off (including after the front doors have been opened).
Sequential control
A n a c t i o n t o t h e fi r s t n o t c h o n t h e control starts a window movement which stops when the control is released. A press for about one second on the control will close or open the window fully, a further press will stop the movement.
PAY ATTENTION TO WHERE CHILDREN ARE WHEN OPERATING THE ELECTRIC WINDOWS.
Always remove the key from the ignition when leaving the vehicle, even for a short time.
When the driver is actioning the controls for the passenger win dows, he must make sure that no-one is obstructing the windows from lo sing properly.
The driver should ensure that the passengers use the windows cor-rectly.
If any person should be at risk of becoming trapped by the operation of the windows, you must reverse the movement of the glass. For t hat, reverse the position of the control concerned.
This is for deactivating operation of the electric windows and opening of the rear doors from the rear seat positions. It is activated by a press on the control A located on the window control panel or by an action on the locks of the rear doors. The warning lamp in the instrument panel comes on temporarily. Each time you switch on the ignition, the warning lamp lights up for a short time.
It is still possible to open the doors from the outside and to operate the rear windows from the front seat positions.
Anti-pinch
An anti-pinch device will stop the glass from rising. If it meet s an obstacle, it goes back down.
After a battery disconnection or following a malfunction, you have to re-initialise theanti-pinch function for each window :
- Use the control to open the window fully, then attempt to close it. It will rise only a few centimetres.
- Pull again on the control until the window closes fully. Once the window is closed, sustain the press on the control for one second.
Warning : During this operation, the anti-pinch protection is inoperat ive.
Child safety
E L E C T R I C W I N D O W S
Page 98 of 266
A
III
97
If you decide to drive with the doors locked, be aware that this w i l l m a k e a c c e s s m o r e d i f fi c u l t f o r t h e e m e r g e n c y s e r v i c e s i n t h e event of an accident.
Note : the control A is inactive when the vehicle has been locked by means of the remote control or the key
Door selectivity
If you have selected “plip action : driver’s door” in the multifunction screen menu :
- a press on the remote control opens the driver’s door,
- a second press opens all the doors.
Anti-intrusion security
On starting the vehicle, the system automatically locks the doors w hen you have reached a speed of around 10 km/h (6 mph).
Note : Whenever a door is opened, the door will lock again automatically when the vehicle reaches a speed of around 10 km/h (6 mp h).
Activation / Deactivation of the function
After switching on the ignition, give a long press on the ce ntral unlocking control until you see a message displayed and a sound signal is emitted.
Locking from the inside
A press on the control A operates the electric central locking and un-locking, provided the doors and tailgate are closed.
The doors can still be opened from the inside.
If one of the doors is open or not properly closed, the central lock-ing does not operate.
The warning lamp on the control A signals 3 statuses :
- I t fl a s h e s w h e n t h e d o o r s a r e locked, with the vehicle stationary and the engine turned off.
- It lights up when the doors are locked, or when the ignition is switched on.
- It goes out if the doors are not locked.
A C C E S S T O T H E V E H I C L E
Page 99 of 266
CB
98
III
A C C E S S T O T H E V E H I C L E
Emergency unlocking of the boot
Should there be a problem with the boot lock, or a battery failure :
- From the interior of the bootspace, face the rear of the vehicle.
- Insert the point of a screwdriver into the aperture Cof the lock.
- Push the white component inside the lock to the left, to unlock the boot.
Manual control (emergency mode)
Should there be an electrical failure it is possible to lock the vehicle’ doors by actioning the control B on each door.
With the door open, insert for example the end of the ignition key into the aperture and turn it.
Close the door.
After a repair, normal functioning resumes by means of the unlocking control A, the remote control or the key used in the driver’s door.
Page 100 of 266
*
*
III
99
V E N T I L A T I O N - H E A T I N G
These air vents apply only to the 7-seater versions.