check engine Citroen C4 PICASSO DAG 2008.5 1.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C4 PICASSO DAG, Model: Citroen C4 PICASSO DAG 2008.5 1.GPages: 330, PDF Size: 13.13 MB
Page 199 of 330

165 
C H E C K S
                Brake pads   Brake  wear  depends  on  
the  style  of  driving,  par-
ticularly  in  the  case  of 
vehicles used in town, over 
short  distances.  It  may  be 
necessary  to  have  the  condition  of 
the  brakes  checked,  even  between 
vehicle services.  
 Unless there is a leak in the circuit, a  
 d r o p   i n   t h e   b r a k e   fl   u i d   l e v e l   i n d i c a t e s  
that the brake pads are worn.  
      Manual gearbox 
 The  gearbox  does  not 
require  any  maintenance 
(no oil change). 
     6 - s p e e d   e l e c t r o n i c   g e a r b o x   
system  
 The  gearbox  does  not  require  any  
maintenance (no oil change).  
      Automatic gearbox  
 The  gearbox  does  not  require  any  
maintenance (no oil change).    Brake disc wear status 
 For  information  relating  to 
checking  the  brake  disc 
wear  status,  contact  a 
CITROËN dealer.  
  Handbrake  
 If  the  handbrake  travel  is  too  long  
or  if  a  loss  of  effectiveness  of  this 
system  is  noticed,  the  handbrake 
must  be  adjusted,  even  between 
two services.  
 This  system  must  be  checked  by  a  
CITROËN dealer.    Only  use  products  recom-
mended  by  CITROËN  or 
products of equivalent qua-
 l i t y   a n d   s p e c i fi   c a t i o n s .  
 In  order  to  optimise  the  operation 
of units as important as the braking 
system,  CITROËN  selects  and 
 o f f e r s   v e r y   s p e c i fi   c   p r o d u c t s .   
 To  avoid  damaging  the  electrical  
units,  the  use  of  a  high  pressure 
washer in the engine compartment 
is strictly   prohibited  .  
 Refer to the servicing booklet for the 
details of the level checking interval 
for this component.   
 Refer to the servicing booklet for de- 
tails  of  the  checking  interval  for  this 
component.   
 Refer  to  the  servicing  booklet  for  
details  of  the  checking  interval  for 
this component.