Citroen C4 PICASSO RHD 2013 1.G Owner's Manual
Manufacturer: CITROEN, Model Year: 2013, Model line: C4 PICASSO RHD, Model: Citroen C4 PICASSO RHD 2013 1.GPages: 420, PDF Size: 9.66 MB
Page 191 of 420

189
4
Driving
  This system indicates the proximity of an 
obstacle (person, vehicle, tree, gate, etc.) which comes within the field of detection of sensorslocated in the bumper.
 Certain types of obstacle (stake, roadworkscone, etc.) detected initially will no longer bedetected at the end of the manoeuvre due to 
the presence of blind spots.  
 
 
 
 
 
 
Parking sensors 
 
 
This function cannot, in any circumstances, take the place of the vigilance and responsibility of the driver.The system is switched on by engaging reverse
gear. This is accompanied by an audible signal. 
The system is switched off when you exit reverse gear.
Audible assistance 
The proximity information is given by anintermittent audible signal, the frequency of whichincreases as the vehicle approaches the obstacle.
The sound emitted by the speaker (right or left)indicates the side on which the obstacle is located. 
When the distance between the vehicle andthe obstacle becomes less than approximately 
thirty centimetres, the audible signal becomescontinuous.  
 
Rear parking sensors 
 
 
 Visual assistance 
 
This supplements the audible signal bydisplaying bars in the screen or the instrument 
panel which move progressively nearer to 
the vehicle. When the obstacle is near, the"Danger" symbol is displayed. 
Page 192 of 420

190
Driving
Front par king sensors
   
The sound emitted by the speaker (frontor rear) indicates whether the obstacle is in front or behind.
The system will be deactivatedautomatically if a trailer is beingtowed or a bicycle carrier is fitted ona towbar (vehicle fitted with a towbar installed in line with the manufacturer'srecommendations).
 
 In bad weather or in winter, ensure that the sensors are not covered with mud, ice or snow. When reverse gear isengaged, an audible signal (long beep)indicates that the sensors may be dirty. 
Cer tain sound sources (motorcycle,lorry, pneumatic drill, etc.) may trigger the audible signals of the parkingsensor system.   In addition to the rear parkin
g sensors, the front parking sensors are triggered when an obstacle 
is detected in front and the speed of the vehicle
is still below 6 mph (10 km/h).
The front parking sensors are interrupted if 
the vehicle stops for more than three seconds
in for ward 
gear, if no fur ther obstacles are 
detected or when the speed of the vehicle 
exceeds 6 mph (10 km/h). 
   
Deactivation / Activation of thefront and rear parking sensors
 
The system is deactivated in the " Drivingassistance" menu in the touch screen tablet.
 
 
Operating fault
 
In the event of a malfunction of 
the system, when reverse gear 
is engaged this warning lamp is 
displa
yed in the instrument panel and/or a message appears, accompaniedby an audible signal (short beep).
  Contact a CITROËN dealer or a qualified 
workshop.
 )Press this button. The indicator lamp in the button comes on.
  Pressin
g this button again reactivates the system.The indicator lamp in the button goes off.  
 
High pressure jet wash 
When washing your vehicle, do notdirect the lance within 30 cm of thesensors.  
 
The parking sensors are deactivated while the Park Assist system is measuring a space.See the "Park Assist" section. 
Page 193 of 420

191
4
Driving
   
 
 
 
 
Reversing camera 
 
 
Clean the reversing camera regularly using a soft, dry cloth.      
The reversing camera is activated automatically 
when reverse gear is engaged.
 Depending on version, the image is displayed in 
the touch screen tablet or the instrument panel. 
The space between the blue lines represents
the width of your vehicle except for the door 
mirrors.   
The blue lines represent the general direction of the vehicle.
  The red lines represent a distance of about
30 cm beyond the edge of your vehicle's
rear bumper. The audible signal becomes continuous from this limit. 
  The green lines represent distances of about 1
and 2 metres beyond the edge of your vehicle's 
rear bumper.
 
The turquoise blue curves represent the 
maximum turning circle.   
The reversing camera cannot in any circumstances be a substitute for thevigilance and responsibility of the driver.
 
 Opening the tailgate causes the display to disappear.  
 
 
The reversing camera function may be completed with parking sensors.  
High pressure jet washingWhen washing your vehicle, do not direct the lance within 30 cm of thecamera lens.  
  
Page 194 of 420

192
Driving
   
 
 
 
 
360 Vision 
This system provides a view in the instrument panel of the near surroundings of your vehicle, 
using cameras mounted at the front and rear of 
your vehicle and under the door mirrors.
Dependin
g on the angle of view chosen (front
view, rear view or 360° panoramic view),360 Vision provides special visual assistance
in particular driving conditions such as when entering a blind crossing or monoeuvring in
areas of reduced visibility.Once activated, this function operates up to9 mph (15 km/h). Above 18 mph (30 km/h), thefunction is deactivated automatically.
This system is a visual aid which in nocircumstances can replace the vigilance and responsibility of the driver. The images provided by the cameras may be deformed by the relief. Thepresence of areas in shade, in sunny conditions, or of low ambient light maydarken the image and reduce contrast.
   Forward vision 
 
The camera located in the front bumper isactivated and views of the areas located at frontleft and front right appear simultaneously in the
instrument panel.  
 
 Rear vision 
 
The camera located in the tailgate is activated
and the view of the area behind your vehicle is
displayed in the instrument panel and behaveslike a reversing camera, whatever the position
of the gear selector lever. 
  The blue lines represent the width of your 
vehicle (excluding mirrors): they move
according to the position of the steering wheel.
  The red line represents a distance of 30 cm 
from the rear bumper, and the two 
green 
lines, 1 m and 2 m from the rear bumper,
respectively.
   
Rear vision is displayed automaticallywhen engaging reverse, regardless of the state of the system.